Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 10-18765
5 Drawer Locker Room Workbox
This trunk was designed for UCLA to provide a storage solution that can act as a cabinet when the team is home and can also be brought on the road. The trunk features 5 drawers and a removable lid that can double as a table.
Each of the drawers is made from 1/2" Baltic Birch and finished with clear lacquer. The exterior is built from 1/2" plywood laminated with dark blue ABS plastic and features 3.5" casters (2 Locking + 2 Non) and a custom 2 color UCLA Bruins logo.
Special thanks to UCLA!
- REFERENCE: 10-18765
- CATEGORY: Sports
Related Products
Portable Production Office Workbox w/Laminator Storage
This custom touring office workbox by LM Cases was built for the Atlanta Falcons to transport office equipment as part of a portable football operations setup. Designed to fit truck pack dimensions and under a tour bus, the case features a shock-isolated drawer system with configurable storage, a dedicated laminator compartment, and an integrated pop-up work table. The rugged ABS-laminated exterior, heavy-duty hardware, and locking casters make it ideal for demanding travel environments.
NY Jets Custom Coffee & Sewing Workstation
This case was designed for the New York Jets equipment management staff to be a mobile sewing workstation and coffee dispenser.
NY Jets Custom Equipment Room Workbox
This case was designed for the New York Jets equipment management staff to be a mobile equipment room workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x3 grid of pegboard mounted SmartJars that provide 24 individual storage compartments for small parts. The lid also features 8 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid also contains a custom insert for one cordless drill and one rivet gun. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
New York Jets Custom Sideline Workbox
The case is designed for the New York Jets equipment management staff to be a mobile sideline workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x8 grid of pegboard mounted SmartJars that provide 64 individual storage compartments for small parts. The lid also features 12 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
New York Jets Backup Jersey Trunk
This trunk was designed for New York Jets equipment department to be a storage trunk for their backup jerseys. The trunk features a divider network constructed of durable and easy to clean marine grade plastic. This grid creates 80 compartments and each compartment stores a plastic sleeve containing two rolled up jerseys. Each compartment is sized at 7 ¾” x 7 ¼” x 15.” The trunk exterior is built out of 1/2” plywood with black exterior ABS laminate. The trunk rides on 4” casters (front 4 locking) mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
LSU Tape Trunk
This trunk was designed for Louisiana State University’s equipment department to be a catch all utility storage solution for use in athletics and specifically for mulitple rolls of tape. The trunk features a large, bottom storage section built out of easy to clean black ABS. The interior also features 4 removable trays. All 4 are equal in size providing a dimension of 9 7/8” x 26 ¼” x 5 ¾”. Each tray features a hinged lid made from 3/8” clear Lexan. The trunk exterior is built out of 3/8” plywood with black exterior ABS laminate. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
Eastern Illinois University Utility Trunk
This equipment trunk is designed to be a catch all utility storage solution for use in athletics. The trunk features an easy to clean black texture coated interior. The interior also features 2 removable trays. One tray is open for general storage; the other tray features 2 removable dividers that create 3 compartments. The trunk exterior is built out of 3/8” plywood with your charcoal exterior laminate color and also features three silkscreened prints of the three color Eastern Illinois logo. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large recessed latches and handles, recessed lid stays and round ball corners.
BYU Athletic Trainer’s Workbox
This custom indoor athletic trainer’s trunk was built for the Brigham Young University football team. The trunk is designed to be a mobile workstation for the team’s athletic trainers stored indoors during games.
KC Chiefs Modalities Workbox
This custom modality trunk was built for the Kansas City Chiefs. The custom workbox is designed to hold various items needed by the team when they are on the road.
6 Drawer Craftsman Tool Chest w/Tour Grade Flight Case
This portable heavy duty tool chest is designed for mobile productions and technicians alike. The HD Craftsman® tool chest features 6 heavy duty drawers and a large work surface protected by a gas spring assisted lid. The work surface features 6 AC power outlets and 2 USB A charging ports. Power is brought into the case via a LM Tour Systems DSK-I inlet box. The DSK-I box features a locking Neutrik True1® power inlet and a courtesy True1® power outlet. A HD LM Tour Systems 25ft True1 power cable is included.
Locker Room Supply Trunk
This locker room supply trunk is designed to be a convenient storage solution and workstation for a variety of applications. The truck can easily be used for equipment managers and athletic trainers alike.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
6 Drawer Sideline Window Trunk
This 6-drawer sideline window drawer trunk was designed for West Virginia Football. The trunk features 6 equally sized drawers with interior dimensions of 10.875” wide x 22” deep x 12” tall. Each drawer is built from ½” Baltic Birch plywood, finished with black texture coating and mounted on HD Accuride glides.
Custom Recruiting Trunk w/Removable Trays For Socks & Gloves
This trunk was built for West Virginia University’s football recruiting program. The trunk features 2 removable trays for gloves and socks. Each of the removable trays are designed to hang on the sides of the trunk.
Buffalo Bills Upper/Lower Extremities Athletic Trainers Trunk
This athletic trainer's trunk was designed for the Buffalo Bills. The trunk features 4 equally sized drawers with 2 removable ¼” marine grade plastic dividers per drawer. Each drawer features a magnet at the back that secures it to the case wall when not in use. This helps to keep drawers closed when the trunk is moved around with the lid open. Each drawer is built from ½” Baltic birch as is finished with black textured coating. The drawers are mounted on HD Accuride glides. The trunk’s front lid features a bottom divider for bottle storage.
Snap Attack / Aerial Attack Football Machine Trunk w/Generator
This trunk is designed to hold a Snap Attack football launching machine. The trunk is fully integrated with a 125ft power cable reel, and a gas generator for long distance or remote operation. The lids of the trunk fold down and feature nets for ball storage during use.
Vegas Knight Hawks Locker Room Supply Trunk
This trunk was built for the Vegas Knight Hawks. The design allows for storage in the lid for small parts in addition to large drawers in the main section for bulkier items.
Davidson College Athletic Trainers Workbox Trunk
This trunk was built for Davidson College’s athletic training department as a large format storage trunk. The trunk features a retractable sunshade, hinged tape holders, custom drawers, and multiple storage bins.
Penn State Sideline Drawer Trunk w/Fold Flat Lids
This trunk was designed for Penn State as a sideline storage unit. The trunk features 9 HD drawers and fold flat front lids for fast deployment.
Sacramento State 8 Drawer Sideline Drawer Trunk Workbox
This custom sideline trunk was designed for Sacramento State. The trunk features 8 drawers for storage.