Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 14-0250
Clear Acrylic Lectern Road Case
This case was built for Oxygen Event Works for their 1/2" Clear Acrylic lectern. The lectern is held in a custom non-abrasive Crosslink foam lined compartment that features a 1/2" marine grade plastic bottom for easy loading and unloading.
Crosslink foam is used for all surfaces touching the lectern to ensure that despite rough treatment and constant contact, the lectern can remain un-scratched. A accessory compartment is mounted in the lid for additional storage.
The exterior case is built out of 3/8" plywood laminated with silver ABS plastic. The case also features yellow lid strips, a custom print of the OEW 2 color silkscreen, deep recessed handles and 4" Colson casters.
Special thanks to Oxygen Event Works!
- REFERENCE: 14-0250
- CATEGORY: Audio/Visual CATEGORY: Trade Show/Exhibit
Related Products
Large Acrylic Lectern/Podium Transport Case
This custom lectern and podium road case by LM Cases is designed to accommodate larger lectern models. It features non-abrasive foam protection with a durable loading surface, a removable front lid, heavy-duty recessed handles, and smooth-rolling locking casters, with options for custom colors and logo branding.
Modular Dance Costume Display Case For Trade Shows
This custom modular trade show case built for Discount Dance Supply is a fully configurable display and storage solution designed for conventions and touring exhibits. The system features adjustable garment hanging sections, removable modular inserts for folded apparel, integrated color-changing LED lighting, dual 50” 4K monitors for digital signage, and built-in power and charging drawers. Designed for durability, flexibility, and fast setup, the case functions as both a rugged transport solution and a professional, high-impact show floor display.
Square Register Portable Point Of Sale Work Station
This custom touring merchandise case built for The Bubble Group is a fully integrated, show-ready point-of-sale system designed for fast and efficient merch sales. Built around a Square Register POS, the case houses a cash drawer, receipt printer, integrated power and networking, and a front-mounted 32” monitor for digital signage. Rugged construction, organized internal storage, and professional electronics integration make this case a reliable all-in-one solution for touring merchandise operations.
Ampli Falcon Patriot Shipping Road Case
This is a heavy-duty transport case designed for a Amplivox Falcon Patriot SN3046 or ST3046 lectern. The case interior is lined with a smooth, non-abrasive, Crosslink foam. This foam is designed to protect the lectern and will not damage the lectern’s fabric. White .125” HDPE plastic is laminate to the bottom foam allowing the lectern to slide in, and out easily.
Lumacurve Airfield Sign Sales Demo Transport Case
This case was designed for Standard Sign as a portable transport solution for Lumacurve signs used in demonstrations at customer sites, and trade shows.
Acrylic Podium Lectern Case
This custom lectern and podium case by LM Cases provides secure transport for most lectern styles. The case features non-abrasive foam protection with a durable loading surface, a removable front lid, smooth-rolling locking casters, and a rugged ABS-laminated exterior, with optional custom logo branding available.
Boeing Monitor Stand Transport Case
This case was designed for Boeing as a portable container to transport a monitor array stand to trade shows. The custom stand that the case transports holds 6 monitors in an array to provide video content for flight simulators. The case is design to be a very simple design allowing the stand cart to be rolled into position, and locked into place.
Lawo Modular Rack Display Case
This case system was designed for the Lawo Group as a modular approach to transport and display their equipment for trade shows. The system is designed around 3RU rack shells, and a storage box that is 3RU in height that stack together allowing for multiple confirguations. The concept allows the racks to remain stacked and locked together in the outer case tray, this expedited the set up and tear down of Lawo's booth.
Sally Beauty Ion Brilliance Trade Show Workbox
This workbox was designed for Sally Beauty Supply to be used as a display case for their Ion Brilliance products at trade shows. The case features 6 utility drawers for storage: each drawer is built out of 1/2" Baltic Birch plywood and is individually lockable with a key. The drawers are mounted on heavy duty Accuride drawer glides and are mounted inside of a frame that isolates the drawers from the exterior case. The left half of the case features 2 hanging bars for samples.
Scenic Panel Frame Case
This case was designed to hold scenic display panel frames for use at trade shows. Each case holds 10 panel frames in custom angled wood slots wrapped in black Ozite. The slots keep the frames separated to ensure safe transport as well as allowing the user to select a single frame with out the need to remove the entire stack.
FOH Chair Case
This case was built for Volt Lites. The case is designed to store the rolling chair and support items used during shows. The chair compartment is lined with 1" PE foam covered with white HDPE plastic to allow the chair to slide in and out without damaging the foam. Below the chair compartment is a large drawer mounted on HD Accuride glides. There is also a storage compartment in the lid to hold a table.
Evertz Microsystems Custom Rack
This case was designed for Evertz Microsystems. The case is designed to hold a custom 40 space unit that weighs 800lbs! The unit needs to travel to different venues and be set up. To accommodate this, heavy duty Colson 4" x 2" casters were used on the rear lid to allow the case to be shipped, and fit through a standard door. The case and unit are extremely heavy; the case is designed to be mechanically lifted by the inner rack shell. In case a forklift or crane are not available, 28 deep recessed handles were used to allow the case to be manually lifted.
Topcon Medical Slit Lamp Case
This case was designed for Topcon Medical to transport their delicate Slit Lamps to trade shows. The case features multiple compartments for various sizes of the companies models. Each compartment is foam lined to match a particular unit and its accessories. The two halves of the case are divided by a foam lined hinged door keeping the contents in each compartment during transportation
Boeing F18 Flight Simulator Case
This case was designed to hold the forward portion of a Boeing F18 flight simulator for use during trade shows. The case features a 2" PE foam lined interior wrapped in black carpet to allow for shock absorption and durability.
Faxitron Bioptics Transport Case
This case was built for Faxitron Bioptics. The case is designed to carry delicate pieces of medical equipment from Faxitron to final locations at hospitals, labs, and doctors offices. The case is designed to be simple to use as well as very durable to withstand un-palletized LTL shipment.
LM Cases “Pimp” FOH Chairs
When a standard chair wont do....its time for the ultimate fly maneuver: LM Cases Pimp Chairs. These chairs are built out of 3/8" plywood laminated with black leather and outfitted with white shag that is enough to bring a tear to Shaft's eye...and that aint no jive!
Custom ASI Graphics Panel Sales Sample Case
This case was built for Architectural Systems Incorporated. The case is designed to hold sample boards of ASI's products. The exterior of the case is built out of lightweight 1/4" plywood and features a telescoping aluminum handle and inboard dolly casters. The exterior also features a custom full color graphics panel of the customers logo printed on ABS plastic. The interior of the case is lined with crosslink foam, which is a class A surface to prevent any abrasion marks that standard foam may leave.
Steelcase Walkstation Trade Show Case
This case was designed for Steelcase Inc. The case is designed to hold the companies Walkstation unit for their trade show exhibit. The interior features a large storage compartment with a 1/2" Comatex plastic bottom to allow easy loading and unloading of the treadmill. The table legs are mounted on the left side of the case, one set of legs hangs on plywood with HDPE plastic runners to allow the piece to slide easily. The small components are held in custom inserts that were built out of laminated PE foam and cut on our CNC fast wire saw. The case lid features a custom instruction board to show which components go in each compartment. The case has 2 separate sides, the front side holds the individual parts, the rear side allows access to the treadmill to aid in its removal and shelfs for the storage of miscellaneous items.
Scoreboard ATA Lift Case
This case was designed to hold a custom Daktronics scoreboard for tradeshow use. The scoreboard is mounted to an electronic lift that can either be controlled via a hardwired switch on the case or a hand held wireless remote control. The case features mounted power strip and a trap door on the bottom of the case to allow for clean wiring in and out of the case.
Calix Trade Show Case
This case was built for Calix. The case is designed to hold a custom display rack used to hold the companies equipment at trade shows. The inner rack needed to protected from shipping abuse because as it is an integral part of Calix's show booth.