Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 25-0101
Coach To Player Storage/Charging Workstation For UNC Charlotte
This custom Coach-to-Player sideline workstation was built by LM Cases for the University of North Carolina at Charlotte. The case is designed to provide organized helmet storage with USB A & C charge ports in each compartment, integrated power for the work surface, small parts storage via containers with removable bins and a lid that converts into a table.
The lid includes 4 Milwaukee Pack Out units for small parts storage. These units can be removed from the lid and be used outside of the case. Each unit features 6 removable cups perfect for small parts like screws and snap buttons. The Pack Out units feature a rubber gasket which keeps parts contained and waterproof. The lid is supported by gas springs to aid in opening and closing in addition to keeping the lid open and stable during use. The lid features a large light to illuminate the entire work surface. This light is operated by a centrally located light switch which is white in color for high visibility. The switch also features a white LED light allowing it to be easily found in the dark. A courtesy outlet is provided for the work surface. This features 2 AC outlets, a USB C and a USB A charge port. Two locking Powercon jacks are provided for additional outlets. A LM Tour Systems Powercon To 4-Plex outlet bank is included to provide 4 additional outlets. Another Powercon outlet is available. A Powercon to Pendant Box cable can optionally be ordered should additional charge ports be required. The work surface is built from ½” white marine grade plastic for maximum visibility.
Below the work surface are two storage drawers. Each drawer features internal dimensions of 23.25” wide x 21” deep x 4” tall. Like the work surface, the drawers are built from ½” white marine grade plastic and are mounted on HD Accuride slides. The drawers feature ¼” marine grade configurable dividers allowing the user to arrange the drawers in any way they would like. The interior structure is built as a fully modular unit and is isolated from the exterior shell using PE foam. This design reduces stress on hardware during transport and prevents load transfer to drawer glides and internal components.
Below the drawers are 8 compartments sized around XL helmets. Each compartment features usable dimensions of 12.75” wide x 13” tall x 18.25” deep. The compartments feature a LM Tour Systems DSK-AC box that is loaded with a duplex outlet with USB charge ports. These boxes are flush mounted with the back of each compartment and provide 2 AC outlets, 1 USB A charge port and 1 USB C charge port for each compartment. As configured the case features a total of 22 AC outlets, 9 USB A charge ports and 9 USB charge ports. Power is brought into the case via a LM Tour Systems DSK-I inlet loaded with a locking True1 power connector. A LM Tour Systems 25ft True1 – Edison power cable is included to power the case. All electrical components were installed and specified by the LM Cases Custom Integration department.
The exterior case is constructed from 1/2” plywood laminated with forest green ABS plastic. The hardware set includes 18 deep recessed handles and recessed lid stays. The case rides on 6” field casters mounted to the case via a ¾” Baltic Birch caster board. The front 2 casters are locking. The case exterior features field replaceable ½” marine grade plastic runners allowing the case to be flipped on its back if needed.
Special thanks to Dale and the UNC Charlotte crew!
- REFERENCE: 25-0101
- CATEGORY: Sports
Related Products
Coach To Player Helmet Charging Trunk (12 Helmets / 44 iPads)
This custom LM Cases charging and storage case is designed to securely hold and power 12 helmets and 44 iPads. Each helmet is housed in an individual marine-grade plastic compartment with a high-power USB-C charging port that delivers up to 30 watts with smart power regulation. The case includes four heavy-duty drawers, each holding 11 iPads separated by removable dividers for organized storage.
Power is supplied through a 30-foot retractable cable reel and distributed internally using True1 power connections. Built from laminated ½” plywood with durable hardware, recessed handles, ventilation, and large locking field casters, the case is engineered for mobility, durability, and efficient device charging in demanding team environments.
Penn State Side Line Helmet Repair Work Station
This case was designed for Penn State University as a side line helmet repair work station. The trunk features 12 Tilt Lock bins mounted in the lid. Each Tilt Lock bin features 3 individual storage compartments each, for a total of 36 individual compartments. The case lid also features a cordless drill storage compartment with a clear Lexan door. The drill’s battery charger is also mounted in the lid for quick access. A 6 outlet power strip is located in the center of the lid to provide easy access to power. The power strip is hard wired to a recessed male Hubbell inlet located on the back of the case. The case lid also features colored LED tape lights allowing for visibility in low lit environments.
San Diego State Side Line Helmet Repair Tech Work Box
This trunk was built for San Diego State University. The trunk is designed to provide a mobile tool station to be used on a football sideline.
2012 Signature Helmet Repair Case
This case was debuted at the 2012 AFCA show. Its designed to be a mobile repair station for helmets when teams are on the road. The case features a removable front lid that has a white dry erase board mounted in the lid and a hinged top lid that holds a drill and tilt lock bins.
University Of Oregon Helmet Repair Sideline Trunk
This case was designed for the University Of Oregon, the case is designed to hold all the parts and pieces needed to repair helmets during games. The case features a 24 bin unit that holds all the screws and other small parts that could get lost. The lid also features 6 cubby compartments in the lid for storage.
University of Arkansas Sideline Workbench
This case was built for the University of Arkansas. The case is designed to hold all the parts needed to repair any of the players equipment that may break during a game. The interior features 6 - 1/2" Baltic birch drawers mounted on HD Accuride drawer glides, 24 plastic bins to hold small items, a cordless drill and battery charger, and a black formica work surface.