LM Case
All In One Portable Photo Booth Case
This case was designed for Apollo Photobooths. The case is designed with quick set up and tear down in mind: all items are pre wired allowing the operator to simply plug the case into a standard outlet and hinge open a protective panel once arriving at a job site.
50” Confidence Monitor Case
This case was designed for RCI Sound Systems. The case features a 50" monitor mounted in a custom enclosure to hold the monitor at a fixed angle for "confidence monitor" applications. The enclosure is built out of 3/4" Baltic Birch plywood and features top & bottom mounted vents, rear access door and VESA pattern holes for mounting the monitor. Custom CNC cut foam cradles were created to provide additional support at the bottom of the monitor.
Yamaha QL5 Mixer Case
This case was designed for the Yamaha QL5 console. The case is a 3 piece design allowing the console to sit in the case tray during use.
20 Capacity Portable iPad Sync/Charge Cart
This case was built for Holy Family Elementary school. The case is used as lockable storage for 20 iPads allowing the school to wheel the case from their IT room to individual classrooms. The LM Cases Custom Integration department designed the case to be extremely simple to use and portable for all users ranging from IT techs to children.
Volt Lites FOH Workbox
This case was designed as a personal workbox for Harrison Lippman at Volt Lites. The case is designed to sit perpendicular to a lighting console on the left hand side. The workbox is split into 2 sections: the right section holds support items like monitors and cables for the lighting console, once the console is set up the case can be rolled next to it. The left side of the case has storage for Harrison's backpack as well as a drawer for file storage. The split lid design allows the access to daily items like his back pack and files with out interfering with the deeper side next to the console.
University Of Nebraska Athletic Trainers Mobile Work Station
This trunk was designed for the University Of Nebraska. The trunk features 8 storage drawers mounted on HD Accuride drawer glides, the drawers are mounted into a cabinet which is then mounted into the case; completely isolating the drawers from the exterior case. This isolation design yields a much stronger case: any stress encountered on the exterior case is not transferred to the drawers. All drawers are built out of 1/2" Baltic Birch plywood and black texture coated. The drawers are all generic open designs allowing miscellaneous items to be stored, the top left drawer is lockable and features individual slots for injectable bottles.
Scenic Panel Frame Case
This case was designed to hold scenic display panel frames for use at trade shows. Each case holds 10 panel frames in custom angled wood slots wrapped in black Ozite. The slots keep the frames separated to ensure safe transport as well as allowing the user to select a single frame with out the need to remove the entire stack.
Custom Triax Reel Case
This custom cable reel case was built for King Cole Audio Visual to provide a portable and organized solution for transporting cables in camera rental applications. The case features a Hannay C1520-17-18 cable reel installed by LM Cases’ Custom Integration department, along with a slotted divider to neatly manage the cable. The reel was upgraded with a heavy-duty foldable handle to improve durability while reducing the overall case size. The exterior is constructed from 3/8" plywood laminated with dark blue ABS plastic, fitted with 4" Colson casters, and finished with a silkscreened KCAV logo for a clean branded appearance.
Third Pack Fly Loom Case
This case was designed to hold custom fly loom cables for line array speaker hangs. The cables can be pulled from the case with the lids closed for easier unloading. The case is built out of 3/4" Baltic Birch and features all black powder coated hardware, 4" x 2" Colson casters, rounded cable cut outs and is finished in black texture coating. The exterior dimensions are 30" x 30" allowing you to fit 3 across in a 90" truck.
Barco Folsom Image Pro4 Case
This case was designed for a Folsom Image Pro in a single rack space removable shell. The rack shell is built from 1/2" Baltic Birch finished with black texture coating.
Custom Direct Box Case
This case was designed for Savion Glover Productions to hold 40 Radial J48 DI's and 10 Countryman Type 85 DI's. The DI's are stored in 2 layers and color coded for easy identification for faster setup's and load out's. The Radial J48 DI's are held in a CNC cut PE foam insert with a white marine grade plastic top layer to protect the foam over time. The 10 Countryman DI's are stored in a removable tray with the same style marine grade plastic/PE foam insert. Also included is a separate tray for patch cables and other accessories.
Swisswing BMR 2100 Shipping Case
This case was designed for the New England Patriots to transport their Swisswing BMR 2100 therapy machine when they are on the road. The case is built out of 3/8" plywood laminated with dark blue ABS. The exterior case features 4" Colson casters, deep recessed handles and stacking caster wells allowing many cases to be stacked.
Southern Connecticut Trainers Sideline Trunk
This trunk was designed for Southern Connecticut University to use as a trainers supply station on the sideline. The right half trunk features 6 deep plastic bins, a 24 bin small parts unit and 3 wooden drawers mounted on HD glides. The left half of the trunk is open and black carpet lined for general storage of items like tape boxes and or a stretcher.
Christie Vista URS Router Case
This case was designed to hold 2 Christie Vista URS Video Routers in an 8 space shock mount rack. Below the rack on the rear of the case is a 4 space rack section used for custom i/o rack panels. The case features 3 drawers, 2 in the front; and one in the back under the rack mount patch section.
Rane Sixty-Two Mixer Case
This case was designed for DJ Rich Marlowe, the case holds the Rane Sixty-Two mixer in a custom CNC cut foam insert. The foam insert accommodates for all knobs and protrusions of the mixer allowing the case to be turned upside down with out any knobs hitting the foam.