LM Case
RED Rack: Noise Reducing Production Rack
The LM Cases RED Rack is designed to be the pinnacle portable noise reduction chamber for your studio equipment. With over 2 years of testing and development we are proud to share our RED Rack with you!
Custom Rifle Case
This rifle case features a custom CNC foam cut insert designed to contour the gun. The insert also features 2 accessory compartments and a Pick N' Pluck foam section for the user to add components at a later time. The exterior case is built out of 1/4" plywood laminated with olive drab green ABS plastic and features surface mounted hardware.
Sony PDW 700 Camera & HDVF-EL Viewfinder Cases
These cases were designed for the University Of Florida's WUFT TV. The cases feature custom cut CNC foam inserts to store the individual components that make up each equipment set. Each of the cases are built from 3/8" plywood laminated with blue ABS plastic and silk screened with the orange Gators logo.
University Of Oregon Chooses LM Cases For Portable iPad & Notebook Charging Case
This case was designed for the University Of Oregon to be a portable charging workstation for the team when they are on the road. The electronoics were spec'd and installed by our in house custom integration department.
8 Capacity Elation Design Brick 70 ATA Case
This case was built for the Audio Visual Professional Group to hold 8 Elation Design Brick 70 light fixtures. The case holds each fixture in a 1" PE foam lined compartment with 2" of PE foam under each unit. The case interior also features a large accessory compartment for cables.
Panavid Chooses LM Cases For Custom Projector & Lens Case
The case was designed for Panavid Inc to accommodate a variety of projectors and lenses for rental applications. A unique challenge with any rental house is how to transport a projector with the correct lens for each unique job. Because Panavid rents the lenses separately from the projector, simply storing the lens in the projector case was not an option; separate lens cases needed to be created.
University Of Georgia Sports Nutrition Case
This case was designed for the University Of Georgia. The case is designed to be a in facility vending cart to despense fresh food and beverages to athletes.
Presonus 16.0.2. Mixer Roadcase
This case was designed for the Presonus 16.0.2. mixer. The case is built out of 1/4″ plywood and features a telescoping aluminum handle and inboard dolly casters. There is a storage compartment under the board for storage that is large enough to fit an iPad.
Presonus 16.0.2. Case – LM XL Series
This case is designed for the Presonus 16.0.2. mixing console. The case is part of our XL Series line of cases, these cases feature a custom aluminum extrusion wrapped around a 1/4″ piece of plywood. The aluminum extrusion utilizes an interlocking tongue and groove to allow for strong lid and base alignment. The aluminum and plywood panel combination results in a strong, lightweight and inexpensive case.
The mixer is surrounded by 1″ foam and has a 2″ deep accessory compartment below the mixer. The exterior case is equipped with 2 surface mounted twist latches and 3 surface mounted spring loaded handles. Any of our standard colors are available at no additional charge.
Fresno State Custom Sideline Tub Trunk
This case was designed for the Fresno State Athletic Department. The case is based around our deluxe tub trunk, you can CLICK HERE for more info on the deluxe tub trunk.
We removed the top two bins and replaced them with 6 Tilt Lock bins for small parts storage, because the bins are so shallow; we added a trap door to the back of the case to create an accessory compartment behind the bins to maximize the storage capacity of the case. The case features 6 removable plastic tubs and 2 wood drawers for storage. The drawers are mounted on heavy duty Accuride drawer glides and feature 12 storage compartments in each drawer.
The case exterior is constructed out of 3/8″ plywood and features a 2 color silkscreen of the school’s logo and 8″ field casters.
Special thanks to Fresno State!!
Craftsman Tool Chest ATA Case Workbox
This case was designed for Hitachi Medical Systems for use in setting up their trade show booth. The case holds a 40″ Craftsman tool chest in a custom ATA case so Hitachi can take their tools on the road.
The case features a removable front lid and a hinged top lid allowing full access to all features of the tool chest. The case interior is lined with hard 1″ PE foam providing maximum support and durability for a life on the road, the case exterior is built from 3/8″ plywood panels and features 4″ Colson casters.
Special thanks to Hitachi Medical!
Presonus StudioLive 16.4.2 w/Integrated iPad Doghouse
This case is designed to hold the Presonus StudioLive 16.4.2. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam piece to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
5 Drawer Locker Room Workbox
This trunk was designed for UCLA to provide a storage solution that can act as a cabinet when the team is home and can also be brought on the road. The trunk features 5 drawers and a removable lid that can double as a table.
Presonus Studiolive 24 With iPad Integrated Doghouse
This case is designed to hold the Presonus StudioLive 24. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam pieces (see picture below) to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
World Wrestling Entertainment Portable Media Rack Center
This project was handled by our Custom Integration department. The process started with WWE and LM working together on gear selection and how the media rack would function in the brutal WWE touring environment. The rack needed to handle a wide variety of input signals to fulfill its duty as a multi format portable preview unit. The LM Custom Integration department handled everything from the sale and installation of the equipment to the custom metal work needed for rack panels and doors.