Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 13-0321
Middle Tennessee Locker Room Valuables Trunk
This trunk was designed for Middle Tennessee State University as a portable lockable storage trunk to hold the staff and team's wallets, phones and jewelry during games.
The trunk features 80 individual compartments complete with a bag for each team member. The bags feature the custom MT team logo as well as a writable space for the players name and the contents of the bag. The divider network is built out of 1/2" Marine Grade plastic, each side of the case features a lockable Marine Grade plastic door to further limit access.
The case exterior is built out of 3/8" plywood laminated with black ABS plastic. The exterior features a custom Middle Tenessee silkscreen, pad-lockable hasp latch and 4" Colson casters.
Special thanks to the Middle Tennessee staff for a great project!
- REFERENCE: 13-0321
- CATEGORY: Sports
Related Products
NY Jets Custom Coffee & Sewing Workstation
This custom mobile workstation case was built for the New York Jets equipment management staff, combining a coffee station and sewing workstation in a portable trunk design.
The coffee section features a commercial-grade Keurig mounted on a slide-out shelf with a custom CNC-cut bracket and foam retention to keep the machine secure during transport. Power is supplied through a 30 ft retractable cable reel, eliminating the need for a separate power cable. Storage includes three drawers with inserts for up to 240 K-Cups and a small wire rack for additional coffee supplies.
The workstation also includes dedicated storage for a Singer 4411 sewing machine and a drawer with thread dowels for organizing spools. All drawers are built from ½” Baltic Birch, mounted on heavy-duty Accuride glides, and lined with carpet and marine-grade plastic dividers for durability and organization.
Above the drawers is a large storage compartment, and the removable front lid converts into a table with folding legs. The case exterior is constructed from ½” plywood laminated with forest green ABS, finished with recessed hardware and 4” casters for durability and mobility.
NY Jets Custom Equipment Room Workbox
This custom mobile equipment workstation was built for the New York Jets equipment management staff to organize and service tools, tape, and small accessories.
The trunk lid features an 8×3 grid of pegboard-mounted SmartJars that create 24 compartments for small parts, along with eight custom storage compartments made from marine-grade plastic with clear Lexan hinged doors and Southco slam latches. The lid also includes dedicated inserts for a cordless drill and rivet gun and is supported by gas shocks, including one locking shock for safety.
The main work surface is constructed from white marine-grade plastic for high visibility when working with small components. Beneath it are six storage drawers made from ½” Baltic Birch, mounted on heavy-duty Accuride glides and lined with carpet and marine-grade plastic dividers.
The case exterior is built from ABS-laminated plywood and features front doors with 270-degree hinges, recessed hardware, and 6” field casters for durability and mobility.
New York Jets Backup Jersey Trunk
This trunk was designed for New York Jets equipment department to be a storage trunk for their backup jerseys. The trunk features a divider network constructed of durable and easy to clean marine grade plastic. This grid creates 80 compartments and each compartment stores a plastic sleeve containing two rolled up jerseys. Each compartment is sized at 7 ¾” x 7 ¼” x 15.” The trunk exterior is built out of 1/2” plywood with black exterior ABS laminate. The trunk rides on 4” casters (front 4 locking) mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
Locker Room Supply Trunk
This locker room supply trunk is designed to be a convenient storage solution and workstation for a variety of applications. The truck can easily be used for equipment managers and athletic trainers alike.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
Vegas Knight Hawks Locker Room Supply Trunk
This trunk was built for the Vegas Knight Hawks. The design allows for storage in the lid for small parts in addition to large drawers in the main section for bulkier items.
Modular Olympic Sports Storage Equipment Room Trunk
The Modular Olympic Sports Storage Cases are designed to work individually and as a set. Primarily designed for off season storage, the units are perfect for olympic sports that don’t require enough equipment for dedicated trunks.
Portable Game Film Trunk With 60” TV
This case was built for West Memphis High School for portable game films. The case features a 60” monitor installed on a HD tour grade electric lift. The lift is controlled with a hardwired remote control that can either be used in the case or handheld. The monitor is wired to a custom IO box that features Neutrik® HDMI and Cat5 jacks. A recessed Hubbell power inlet is the main input source of power. A 25’ 12awg HD extra hard usage power cable is included.
Boise State University Communications Work Box
This case was built for Boise State University. The case is designed to hold CoachComm belt packs, headsets and accessories for the team.
Cleveland Browns Fluids Trunk
This trunk was built for the Cleveland Browns. The case is designed to be a mobile work station that holds a variety of accessories and various tools. The trunk lid features eight Tilt Lock bin units that provide sixteen individual storage compartments for small parts. The Tilt Lock bins feature translucent plastic that allow users to quickly see the contents of each bin at eye level. The lid is supported with gas springs that aid in the opening and closing of the lid. One of the two gas springs feature a locking mechanism to prevent the lid from accidentally closing during use. The main work surface is built out of clear 3/8" scratch resistant Lexan, which allows users to see the contents of the drawers mounted below. The main body of the case features four drawers. The drawers are built into a 1/2" plywood inner shell that is independent of the exterior case. The separate shell allows the drawers to be independent from the exterior case, which allows the appearance of a cleaner exterior due to the lack of exposed rivets used for mounting the drawers. It also prevents any flexing or loading that the case exterior endures from transferring to the drawer glides. Each drawer is custom built out of 1/2" Baltic Birch plywood and mounted on HD Accuride glides. The top two drawers feature two dividers allowing each drawer to be divided into three compartments. The bottom two drawers feature a single center divider allowing two compartments. Each compartment in the top two drawers is 11.25" wide x 21" deep x 7.5" tall. The bottom drawer compartments are 17.125" wide x 21" deep x 7.5" tall.
Cleveland Browns Locker Room Supply Trunk
This trunk was built for the Cleveland Browns. The case is designed to be a mobile work station that holds a variety of accessories, such as tape and various tools. The trunk lid features four Tilt Lock bin units that provide eight individual storage compartments for small parts. The Tilt Lock bins feature translucent plastic that allow users to quickly see the contents of each bin at eye level. The lid also features 6 compartments constructed from 3/8" clear Lexan. Each compartment features a hinged door with a Southco slam latch. The lid is supported with gas springs that aid in the opening and closing of the lid. One of the two gas springs feature a locking mechanism to prevent the lid from accidentally closing during use. The main work surface is built out of clear 3/8" scratch resistant Lexan, which allows users to see the contents of the drawers mounted below. The main body of the case features three drawers. The drawers are built into a 1/2" plywood inner shell that is independent of the exterior case. The separate shell allows the drawers to be independent from the exterior case, which allows the appearance of a cleaner exterior due to the lack of exposed rivets used for mounting the drawers. It also prevents any flexing or loading that the case exterior endures from transferring to the drawer glides. Each drawer is custom built out of 1/2" Baltic Birch plywood and mounted on HD Accuride glides. The top two drawers feature three removable dividers allowing each drawer to be divided into four compartments. Each compartment in the top two drawers is 7.25" wide x 21" deep x 11" tall. The bottom drawer features two removable dividers for a total of three compartments. Each compartment is 9.75" wide x 21" deep x 6" tall.
100 Capacity Valuables Locker Room Trunk
This trunk is designed to hold player's valuables in individualized bags during games. Primirally designed for phones, wallets and watches, this trunk provides and excellent way to keep all valuable items controlled and locked when players and staff are on the field.
Craftsman 40” Top Chest ATA Toolbox Case
This case was designed to hold the Craftsman 40" 8 Drawer Griplatch tool box. The exterior case is built out of 3/8" plywood and features textured black fiberglass laminate. The case features a hinged top lid and removable front lid as well as 8 deep recessed handles. The case sits on a removable caster dolly that is built out of 1.5" thick baltic birch and coated with black texture coating. The case locks into the dollyboard using male and female feet and cups, the dolly board includes 4 Colson super HD 4" x 2" locking casters.
Craftsman 40” 14 Drawer Griplatch ATA Case
This case was designed for the 40" Craftsman 14 drawer Griplatch tool box. The case is built out of 3/8" plywood and is laminated with black textured fiberglass. The exterior case features deep recessed handles and 4" x 2" Colson locking casters. The case is designed to stack with the 8 Drawer Toolbox to make a full workbox set.
5 Drawer Production Workbox
The LM Cases 5 drawer workbox is the perfect addition to any mobile production. Designed to fit around 90" & 96" truck packs, the exterior dimensions are 22.5" wide by 30" deep. The workbox features 5 drawers that are built out of 1/2" Baltic birch and joined via interlocking dove tails. The drawers are finished with black texture coating. All drawers feature recessed handles and are mounted on HD Accuride drawer glides.
UCLA Locker Room Storage Trunk
This trunk was designed for UCLA as a storage solution for their locker room that can also be brought on the road. The trunk is split into 2 separate sides allowing for a variety of storage options.
Philadelphia Eagles Omegawave Heart Rate Monitor Charging Trunk - 180 Capacity
This case was built for the Philadelphia Eagles to store and charge 180 Omegawave heart rate monitors. The design is based on individual shelves that hold 20 charging bases each, players can remove the monitors and snap them onto the charging unit quickly and easily.
University Of Oklahoma Locker Room Storage Trunk w/Charging
This case was designed for Oklahoma University for use as a portable storage unit with charging capability. The case features 6 outlets mounted on the top of the left side of the case allowing devices to be charged while the case is closed. The top left drawer features an additional 6 outlets and 10 USB ports; the case has 12 power outlets in total. The USB ports are split into groups of 6: 6 ports handle 12w devices such as tablets while the remaining 6 handle low power 5w devices such as phones.
University Of Nebraska Tool Workstation
This case was designed for the University of Nebraska for use as a portable work bench. The case is designed to be used as a work station in the locker room when the team is home, and a portable solution for away games. When the team is ready to travel, the lids can simply be closed and the case is ready to go.
Locker Room Workbox
The Locker Room Workbox is designed with ergonomics and fast deployment in mind. The trunk only has one removable lid, which magnetically stores on the back of the trunk for one less thing to trip on in a locker room. The top hinged lid features a storage compartment for a cordless drill, 6 – 3 compartment tilting bins and the drill's battery charger. The work surface is laminated with black Formica and features a recessed 6 outlet power strip that is wired to a retractable 30ft extension cord. Below the work surface are 6 black texture coated drawers mounted on HD Accuride glides for storage.