Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 20-0012
QSC K12.2 Speaker Case - 2 Capacity
This case is designed to fit 2 QSC K12.2 speakers. Each speaker is held in a custom CNC cut foam insert that contours the shape of the cabinet. A ¼” marine grade plastic top cap is laminated to the foam insert to prevent damage as the speakers are loaded and unloaded over time. The case exterior is built from 3/8” plywood laminated with your choice of ABS colors. The hardware set includes 2 deep recessed handles, 4” casters and stacking caster wells in the lid.
To purchase this case from our online store, CLICK HERE.
Related Products
Transport Case For Neumann KH120 II Studio Monitors
This custom speaker transport case is designed to safely store and transport two Neumann KH120 II studio monitor speakers.
The interior features 1” PE foam lining with 2” foam padding beneath each speaker for shock protection. A ¼” marine-grade plastic top cap is integrated into the tray to prevent the speakers from damaging the foam during loading and transport.
The exterior is constructed from ABS-laminated plywood and includes recessed handles, stacking caster wells, and 4” Colson casters mounted on a reinforced caster board, providing durability and easy mobility.
Meyer x40 Speaker Case - 2 Capacity
This custom speaker transport case was built for Mid South Audio to store and transport two Meyer X40 speakers.
The interior features a 3” CNC-cut PE foam insert contoured to the shape of each speaker for secure protection. A ¼” marine-grade plastic top cap helps prevent foam damage during loading and unloading, and a center accessory compartment provides space for small items.
The exterior is constructed from ABS-laminated plywood and includes recessed handles, stacking caster wells, and 4” Colson casters for durability and easy transport. The case is finished with MSA branding and “X40” identification stencils.
Meyer x20 Speaker Road Case - 2 Capacity
This custom case is designed for the Meyer x22 speaker with stand mount adapter attached. Each speaker is held in an individual foam compartment. The foam insert is designed to accommodate the stand mount adapter. A carpet lined accessory compartment is provided for additional storage.
DB Technologies DVX DM12 4 Capacity Monitor Case
This custom road case is designed to hold 4 DB Technologies DVX DM12 speakers. The case features a custom CNC cut foam insert that holds each speaker in a compartment that contours the speaker’s shape.
Meyer MJF208 Speaker Case 2 Capacity
This case is designed to hold 2 Meyer MJF 208 monitors. The speakers are held in a custom CNC cut 3” bottom foam insert that contours their shape. The top of the bottom foam insert features a ¼” black marine grade plastic top cap to prevent the foam from tearing as speakers are loaded and unloaded.
Fulcrum Acoustics FA12 Speaker Case
This is a heavy duty road case for a pair of Fulcum Acoustic FA12 coaxial loud speakers. The case holds the speakers in a custom CNC cut foam insert that contours the shape of the cabinets. A ¼” marine grade plastic top cap is provided for long term durability. This plastic top cap provides maximum durability for the foam insert when users drag the speakers along the top of the case when finding each cavity. A ¼” lip of foam is exposed ensuring that the speaker cabinets are in contact with foam, not the plastic during transport. The case exterior is built out of 3/8” plywood finished with your choice of ABS plastic colors. The case features 4 deep recessed handles, stacking caster wells and 4” Colson casters.
RCF TT052A 4 Capacity Speaker Case
This case was designed for Applied Audio to hold 4 RCF TT052A powered speakers. The speakers are held in 4 individual compartments. Each compartment is separated by a custom CNC cut ½” marine grade plastic divider with a routed in notch to make the speakers easier to handle. A removable 3/8” plywood tray is included for storage. The usable dimensions of the tray are 26.5” wide x 19” deep x 6” tall. The case exterior is built out of 3/8” plywood laminated with ABS plastic. The exterior features 4 deep recessed handles, 2 recessed lid stays, 4” Colson casters (2 locking), stacking caster wells and a route out for a McLoone dry erase road case label
Portable Locker Room Sound System Trunk
This trunk was built for Calhoun County ISD as a portable sound system for their locker room allowing the team to make announcements and play music. The trunk and internal sound system was designed and built by the LM Cases Custom Integration department.
Meyer UPJ Speaker Case
This case was designed for the Audio Visual Professional Group. The case is designed to hold 2 Meyer UPJ cabinets and yoke assemblies. The cabinets are held in 1" PE foam lined compartments with 2" PE foam under each unit. The yoke assemblies are held in black carpet lined compartments, power cables and clamps are stored inside the yoke compartments.
Yamaha IF2205 Speaker Case
This case was designed for Yamaha Commercial Audio. The case is designed to hold 6 Yamaha IF2205 speakers in a custom CNC cut foam insert. There is also a large accessory area for flyware or any cables.
Bose L1 Speaker System ATA Case
This case was built for Visual Aids Electronics. The case is designed to hold a complete Bose L1 Speaker system. The system subwoofer is kept in a hinged storage compartment in the front of the case. The foam is notched on the compartment lid to allow the lid to sit just beyond 90 degrees so the lid will not fall when loading and unloading the sub. The speaker columns are stored above the subwoofer compartment. The speaker column pedestal is stored on its side in a foam lined rear compartment
D&B Q10 Speaker Case
This case was built for Overland Pro Audio. The case is designed to be a combination lift off/hinged lid which we refer to as our "M-Style" case closure. The case tray features a CNC cut insert to nest the trapezoidal cabinets next to each other. The hinged top portion of the lid hold all the rigging accessories and cables needed to fly the two cabinets.
Nexo 45 n-12 Monitor Case
This case was designed for Nomad Sound. The case is designed to hold 2 Nexo 45 n12 monitors on their sides to achieve an exterior truck pack dimension of 30" x 24". The wedges are held in a custom CNC cut insert to hold the unique angle of the cabinets. The angled pieces of foam were cut on our fast wire CNC saw and the outlines of the cabinets were cut on our reciprocating knife CNC saw.
LM Cases Outline Mini Comp.a.s.s. Array Flight Cases
This case was designed and built for Maryland Sound International. The case is designed to hold 4 Outline Mini Compass line array elements. Two elements are rigged together and placed in a custom CNC cut foam insert, there are also custom foam cut outs for 8 splay bars between the two sections. The portion of the insert that holds the elements features an angled piece of PE foam that matched the angle of the cabinet so that the rigged elements will sit flat in the case.
JBL VRX918S/P Sub ATA Case
This case is designed to hold a single JBL VRX 918S/P. Because the exterior dimensions of the subs are the same both the 918S and 918P will fit in this case. The case is built out of 3/8" plywood and features a 1" PE foam lined interior, 3.5" casters and 4 recessed handles.
QSC K8 Speaker Case
This case is designed to hold 2 QSC K8 loudspeakers. The case is built out of 3/8" plywood and features individual foam lined compartments for each speaker. The exterior of the case features stacking caster wells in the lid and 3.5" casters w/pad.
JBL VRX 932LAP Speaker Case
This case is designed to hold 2 JBL VRX 932LAP speaker cabinets. The cabinets ride on their sides in a 1" PE foam lined case that features a divider to keep the speakers separated. The exterior case is built out of 3/8" plywood and features 3.5" Colson casters.
D&B Audiotechnik Q1 Loudspeaker Flight Case
This case was designed for VA based sound company Overland Pro Audio. The case is designed to be modular allowing Overland to use the case for all types of events.
Mackie SRM350 Speaker Case - Pelican 1690
This is a Pelican 1690 waterproof case with a custom foam insert for 2 Mackie SRM 350 speakers. The foam insert is designed to provide individual compartments for each speaker, while matching the draft and corner contours of the Pelican 1690. The case is designed with rental applications and working bands in mind. The case allows the speakers to be transported in wet environments such as pick up trucks and trailers. It also provides a water proof shelter at outdoor events should the speakers need to be put away quickly due to inclement weather.
Nexo Geo S1230 Flight Case
This case was built for Austin TX based sound company Nomad Sound. The case is designed to hold 2 Nexo Geo S1230 speaker cabinets in the bottom section, and rigging accessories in the top compartment. The case features a custom CNC cut insert that contours the speaker cabinets to absorb shock and prevent movement. The CNC cut insert also allowed the case to be much smaller because a wood divider was not needed to separate the cabinets.