Products
Ross TouchDrive TD2 Switcher Case
This custom tour case is designed to hold the Ross TD2 Touch Drive switcher. The switcher is held in a custom ¾” Baltic birch enclosure and features a doghouse, a 2U patch section and hinged top lid. A separate compartment in the lid is designed to hold the Ross monitor.
Small Format Van Pack Tech Trunk
This trunk was designed for smaller events where a more compact sized utility trunk is needed. This truck is perfect as a support unit for projectors or consoles. The case features a removable XL Series top tray with 3 movable dividers which is perfect for tools and adapters.
Meyer x40 Speaker Case - 2 Capacity
This case is designed for Mid South Audio to hold 2 Meyer x40 speakers. The speakers are held in a custom CNC cut PE foam insert that is 3” tall. The foam insert contours the shape of each speaker cabinet and features a ¼” marine grade plastic top cap to prevent damaging the foam when the speakers are loaded and unloaded. A 5” x 2” center accessory compartment is provided for additional storage.
Single Position Video Broadcast Workstation
This custom video flypack case was built for SoCal Rentals. The case is designed to be a prewired, quickly deployable video production rig.
Compact Guitar Tech Case For Fly Dates
This case is designed for the touring guitar tech who needs a smaller workbox for fly dates and smaller venues. The case features a ½” black marine grade plastic deck piece. The deck includes 2 fold outs designed to expand the work surface and hold the guitar in place by its body and neck. Each of the fold outs are mounted via position control hinges. These hinges perform in the same way as a laptop screen allowing the fold outs to be mounted at any angle along a 90-degree plane. The neck support features rubber bushings arranged in a “V” to allow the gripping of any neck shape. The body support features a piece of purple crushed velvet foam and a “V” shaped piece of ½” marine grade plastic to lock the guitar in place via the strap button.
20U Portable Server Transit Rack Case
This custom 20U portable transit case was designed for moving servers into data centers. The unique design features clear front and rear doors allowing each rack to pass through RFID portals for asset management.
Dr. Z Z80 Guitar Amp Head Road Case
This custom flight case is designed for Steve Miller for the Dr. Z Z80 amp head. The case interior is lined with 1” PE foam. A 14” wide x 7” deep x 1” tall accessory compartment is located under the amplifier for storage.
Amplified Nation OverDrive Reverb Guitar Amp Case
This custom case was built for Lake Baum for his Amplified Nation Overdrive Reverb amplifier and 1x12 cabinet. The custom case lid configuration allows it to operate as a “live in” or a “pull over”.
Dr. Z X-Ray Combo Amp Road Case
This custom case is designed for the Steve Miller for his Dr Z X-Ray Combo guitar amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
San Jose State Coat Storage Trunk
This trunk was designed for the San Jose State football team’s coat storage. The trunk features two hanging clothes sections, and each section features an HD aluminum bar for hangers. The bar can be adjusted in 3 positions front to back to accommodate a variety of hangers. Each clothing compartment is lined in water resistant white marine grade plastic. Four recessed vents are included to provide ventilation while in storage and transit. The hanging clothes sections also feature doors made of 3/8” clear Lexan. Each of these doors uses 2 Southco slam latches.
New York Jets Custom Sideline Workbox
The case is designed for the New York Jets equipment management staff to be a mobile sideline workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x8 grid of pegboard mounted SmartJars that provide 64 individual storage compartments for small parts. The lid also features 12 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
New York Jets Backup Jersey Trunk
This trunk was designed for New York Jets equipment department to be a storage trunk for their backup jerseys. The trunk features a divider network constructed of durable and easy to clean marine grade plastic. This grid creates 80 compartments and each compartment stores a plastic sleeve containing two rolled up jerseys. Each compartment is sized at 7 ¾” x 7 ¼” x 15.” The trunk exterior is built out of 1/2” plywood with black exterior ABS laminate. The trunk rides on 4” casters (front 4 locking) mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
LSU Tape Trunk
This trunk was designed for Louisiana State University’s equipment department to be a catch all utility storage solution for use in athletics and specifically for mulitple rolls of tape. The trunk features a large, bottom storage section built out of easy to clean black ABS. The interior also features 4 removable trays. All 4 are equal in size providing a dimension of 9 7/8” x 26 ¼” x 5 ¾”. Each tray features a hinged lid made from 3/8” clear Lexan. The trunk exterior is built out of 3/8” plywood with black exterior ABS laminate. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
New York Jets Sideline Workbox
This case was designed for the New York Jets equipment management staff to be a mobile workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 5x5 grid of pegboard mounted SmartJars that provide 25 individual storage compartments for small parts. The lid also features 8 compartments constructed from 3/8" clear Lexan. Each compartment features a hinged door with a Southco slam latch. The lid is supported by two ratcheting lid stays. These allow for the lid to be positioned at multiple angles to protect interior contents in the event of inclement weather or high winds.
Univ Of Utah Athletic Trainers Sideline Trunk
This custom sideline trunk was designed for the University Of Utah to be an all-in-one storage solution for sidelines.