Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 15-0168
Avalon U5 Pelican 1450 Case
This case was built for dmr-rents.com. The case is designed around a Pelican 1450 waterproof case. The U5 is cradled in a custom cut foam insert that accommodates the ground lift switch in the back of the unit as well as front controls. The front of the unit is supported with a pice of foam that lies between the "speaker to input" and "active to thru" buttons on the front of the unit. The insert also accommodates the units rubber feet and provides storage for the power cable.
Special thanks to dmr-rents.com!
To purchase this case from our online store, CLICK HERE.
- REFERENCE: 15-0168
- CATEGORY: Audio/Visual
Related Products
Studio Control Room Storage Rack/Workbox - 6U Solid Walnut
The studio control room storage rack is designed to hold rack mount equipment and peripherals in a decorative unit for installed applications. The rack is perfect for home studios, conference rooms and houses of worship where a high quality, aesthetically pleasing storage solution is required.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
Custom Portable Vodka Bar Shipping Case
This case was built for Studio 46 media as a gift for their client. The case features a custom CNC cut foam insert that holds bottles of Grey Goose and Titos vodka with 6 custom etched glasses.
30 Capacity Hand Held Mic Caddy For A-Series Workbox Drawers
This removable foam insert is designed around LM’s standard A-Series drawer. A list of compatible cases is listed below. The insert features 30 – 1.5” diameter circular cut outs to accommodate most handheld dynamic mics. The insert is designed to be removable to help expedite set up and tear down.
18RU Double Wide Studio Furniture Grade Rack
This case was designed for Crossroads Church for use in their production studio. The rack is 18U tall and features a 26” deep shell.
Klang Fabrik Portable In Ear Monitor Work Station
This workstation is designed to hold the Klang Fabrik processor with all associated Shure Axient in ear components and a Dell touch screen monitor.
Road Case Style Wall Frame For LP Vinyl Record Album
A perfect way to display your favorite albums! Each frame is hand built one at a time in our shop in Youngstown, Ohio. The album frame is built out of flight case grade aluminum and features mini ball corners. The frame features an inner lip that allows you to use standard wall hangars. This is a must-have for the serious record collector and music enthusiast!
Radial HDI Direct Box Waterproof Pelican Case
This case is designed to hold the Radial HDI and its power cable in a custom CNC cut foam insert. The insert is designed to contour the HDI and hold it while allowing the knobs and switches to float freely without contacting the sides of the foam. The foam insert is free standing and integrates into a waterproof Pelican case.
Radial HDI Active Direct Box Carrying Case
This road case is designed to hold the Radial HDI Active Instrument Direct Box. The case holds the HDI in a custom CNC cut insert that is designed to hold the unit without putting pressure on the knobs or switches. The custom foam insert also holds the unit’s power cable. Check out the LM Tour Systems family of locking IEC power cables if you would like to upgrade your power cable. Our XL Series cases feature a lightweight aluminum lid and body with integrated tongue and groove wrapped around a ¼” piece of ABS laminated plywood with your choice of colors.
40 Capacity Music Stand Transport Case
This case was designed for the Salvation Army band to hold 40 music stands. The case features a custom divider network that holds each stand in an individual compartment.The case interior is lined with ½” PE foam, and features a divider network built from ½” marine grade plastic. Each compartment has usable dimensions of 3” x 3” x 17”.The exterior case is built from 3/8” plywood laminated with silver ABS plastic. The case features a pad locking hasp latch, and 4” Colson casters.
Video Streaming Fly Pack w/Articulating Monitor Arm & 16RU Rack
This case is designed with mobile audio and video productions in mind. The 3 axis monitor mounting system allows the display to be angled in a sitting or standing position, extended, and moved to the left or right of center. A position control board handles the monitors angle. Friction hinges are used allowing the screen to be raised to a vertical position or laid flat. These friction hinges allow the monitor to behave in the same manner as a laptop screen: the screen can be positioned in any position along a 90 degree plane without the need for ratcheting mechanisms or support rods. A Chief K2W120B mount is installed to allows the display to be positioned left or right of center, in addition to 15” of extension towards the user.
Universal Audio Satellite & Apollo Waterproof Transport Case
This case is designed to hold a Universal Audio Satellite desktop DSP accelerator, Apollo audio interface, their power supplies, and Thunderbolt cables. Each item is held in a custom CNC cut PE foam compartment. An accessory area is located under the Satellite for its IEC cable and PSU. An accessory compartment is located under the Apollo for its “wall wart” style PSU. A 5.5” wide x 2.5” deep x 4.5” tall accessory compartment is provided for 2 Thunderbolt cables. The custom foam insert is mounted into a black Pelican 1450 case.
Compact Flypack Production Workstation
This case is designed to be a portable video fly pack workstation. The case includes a Chief FTR1U tilting monitor mount allowing a monitor to be mounted in the case lid. Also included are two slide out shelves to hold a laptop, audio mixer or a video switcher. Below the dual slide out shelf’s is a 9RU rack section. The rack rails are mounted to the case via rubber vibration isolation mounts. The rack section features rear rack rail and a trap door. The case exterior is built out of 3/8” plywood laminated with your choice of ABS colors. The case features deep recessed hardware and rides on 4” Colson casters mounted on a ¾” caster board that spans the entire bottom of the case.
Universal Audio Apollo Twin/Duo Case
This case is designed to hold the Universal Audio Apollo Twin desktop recording interface. The interface us is held in a custom CNC cut PE foam insert. A storage compartment is included to hold the power supply and Thunderbolt cable. The exterior case features a spring loaded surface mounted handle and 2 twist latches.
Pelican 1510 Carry On Tech Workbox
This case is designed with the traveling tech in mind, the user configurable dividers can be positioned to hold common items like tape, headphones, tools and adapters. The mesh lid organizer is perfect for small items like pill bottles, batteries, pens and snack bars. The case is large enough to hold every tech’s basic tools and is small enough to fit in the over head storage bins in most commercial airliners. The case is waterproof and features a retractable handle and luggage style wheels.
Radial Workhorse Cube 500 Series Chassis Case
This case is designed to hold a Radial Engineering Workhorse Cube 500 Series chassis. The case holds the chassis in a custom CNC cut foam insert that allows the knobs on each card to "float" without coming into contact with the side walls of the foam insert. The foam insert holds the chassis and the power supply. The exterior case is built out of 1/4" plywood laminated with your choice of ABS plastic colors, the exterior case features 3 recessed handles.
Radial SixPack 500 Series Chassis Case
This case is designed to hold a Radial Engineering SixPack 500 Series Chassis. The case holds the unit in a custom CNC cut foam insert that allows the knobs on each unit to float and not come into contact will the walls of the foam insert. In addition to holding the SixPack by its sides a slot is incorporated into the lid to accommodate the handle for rock solid placement, there is also a slot for the units power supply. The foam insert is mounted in a waterproof Pelican 1560 case.
Radial Firefly Tube DI w/JR2 Footswitch Case
This is a custom waterproof case for the Radial Firefly Tube DI, JR2 Footwitch and power cable. The case holds each component of the system in a individual compartment custom cut to form fit each item. The foam insert is made out of high quality PE foam that is cut on a CNC machine and mounted in a Pelican 1450 case.
Sonnet RackMac Pro Flypack Case
This flypack system was designed for the Farm League. The system is based around a Sonnet MacRack Pro mounted in a 6RU rack housed in a Pelican 1630 case.
Custom Clark Wire Cable Reel Case
This case was designed for Amplio Systems to hold a Clark Wire CWR-528 cable reel. The case features a black painted interior with a 1/2" mounting board to attach the reel. The reel was installed by the LM Cases Custom Integration department.