Direct Boxes/Small Processors
Radial HDI Direct Box Waterproof Pelican Case
This case is designed to hold the Radial HDI and its power cable in a custom CNC cut foam insert. The insert is designed to contour the HDI and hold it while allowing the knobs and switches to float freely without contacting the sides of the foam. The foam insert is free standing and integrates into a waterproof Pelican case.
Radial HDI Active Direct Box Carrying Case
This road case is designed to hold the Radial HDI Active Instrument Direct Box. The case holds the HDI in a custom CNC cut insert that is designed to hold the unit without putting pressure on the knobs or switches. The custom foam insert also holds the unit’s power cable. Check out the LM Tour Systems family of locking IEC power cables if you would like to upgrade your power cable. Our XL Series cases feature a lightweight aluminum lid and body with integrated tongue and groove wrapped around a ¼” piece of ABS laminated plywood with your choice of colors.
Universal Audio Satellite & Apollo Waterproof Transport Case
This case is designed to hold a Universal Audio Satellite desktop DSP accelerator, Apollo audio interface, their power supplies, and Thunderbolt cables. Each item is held in a custom CNC cut PE foam compartment. An accessory area is located under the Satellite for its IEC cable and PSU. An accessory compartment is located under the Apollo for its “wall wart” style PSU. A 5.5” wide x 2.5” deep x 4.5” tall accessory compartment is provided for 2 Thunderbolt cables. The custom foam insert is mounted into a black Pelican 1450 case.
Universal Audio Apollo Twin/Duo Case
This case is designed to hold the Universal Audio Apollo Twin desktop recording interface. The interface us is held in a custom CNC cut PE foam insert. A storage compartment is included to hold the power supply and Thunderbolt cable. The exterior case features a spring loaded surface mounted handle and 2 twist latches.
Radial Workhorse Cube 500 Series Chassis Case
This case is designed to hold a Radial Engineering Workhorse Cube 500 Series chassis. The case holds the chassis in a custom CNC cut foam insert that allows the knobs on each card to "float" without coming into contact with the side walls of the foam insert. The foam insert holds the chassis and the power supply. The exterior case is built out of 1/4" plywood laminated with your choice of ABS plastic colors, the exterior case features 3 recessed handles.
Radial SixPack 500 Series Chassis Case
This case is designed to hold a Radial Engineering SixPack 500 Series Chassis. The case holds the unit in a custom CNC cut foam insert that allows the knobs on each unit to float and not come into contact will the walls of the foam insert. In addition to holding the SixPack by its sides a slot is incorporated into the lid to accommodate the handle for rock solid placement, there is also a slot for the units power supply. The foam insert is mounted in a waterproof Pelican 1560 case.
Radial Firefly Tube DI w/JR2 Footswitch Case
This is a custom waterproof case for the Radial Firefly Tube DI, JR2 Footwitch and power cable. The case holds each component of the system in a individual compartment custom cut to form fit each item. The foam insert is made out of high quality PE foam that is cut on a CNC machine and mounted in a Pelican 1450 case.
Custom Direct Box Case
This case was designed for Savion Glover Productions to hold 40 Radial J48 DI's and 10 Countryman Type 85 DI's. The DI's are stored in 2 layers and color coded for easy identification for faster setup's and load out's. The Radial J48 DI's are held in a CNC cut PE foam insert with a white marine grade plastic top layer to protect the foam over time. The 10 Countryman DI's are stored in a removable tray with the same style marine grade plastic/PE foam insert. Also included is a separate tray for patch cables and other accessories.
A Designs REDDI Waterproof Hard Case
This case was designed for the A Designs Red DI. The case features a custom CNC cut foam insert mounted in a waterproof Storm iM2306 case. The foam insert is designed to custom contour the DI allowing all knobs and switched to clear the foam, this prevents damage during shipping.
Summit Audio Half Rack Processor Case – 2BA-221/TLA50/FeQ-50/TD-100
This case is designed to fit all Summit Audio half rack audio processors including the: 2BA-221 preamp, FeQ-50 EQ, TLA-50 compressor and the TD-100 DI. The case holds each unit in a custom CNC cut foam insert that contours the front and rear allowing the knobs and switches to remain untouched. There is storage below the unit for the power cord. The foam is mounted in a Pelican 1470 case this both lightweight and completely waterproof.
Avalon U5 Pelican 1450 Case
This case was built for dmr-rents.com. The case is designed around a Pelican 1450 waterproof case. The U5 is cradled in a custom cut foam insert that accommodates the ground lift switch in the back of the unit as well as front controls. The front of the unit is supported with a pice of foam that lies between the "speaker to input" and "active to thru" buttons on the front of the unit. The insert also accommodates the units rubber feet and provides storage for the power cable.