Audio/Visual
10RU Pocket Door Amp Rack Road Case
Pocket doors racks are designed for touring applications requiring a truck pack sized case with tethered lids. The lids open with a single latch and can be retracted into the sides of the case preventing lost lids and saving storage space. The rack section is shock mounted and features 24” rail to rail usable space. The front rail features adjustable recess points mounted via custom removable bolt plates. The mid and rear rails are adjustable via sliding tracks, all rails can be moved using a simple 1/4" wrench. The exterior case features stacking caster wells allowing multiple racks to be stacked. Also featured are 4 deep recessed handles and Colson 4” x 2” casters.
16RU Studio Outboard Rack w/Casters & Dove Tailed Corners
This rack is designed to be the perfect complement to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch and features beautifully dove-tailed end joints; all edges are rounded, and the rack is finished with a light coating of clear lacquer. The rack features an 18” deep shell. The front rail is recessed 1”, with the rear rail recessed ½”. This allows a rail-to-rail depth of 16.5”. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish. The rack rides on 3.5” casters, with the front 2 locking.
Elation CW Profile HP Ellipsoidal Light Fixture Road Case - 6 Capacity
This case was built for Nvidia. The case is designed to hold 6 Elation CW Profile light fixtures with their clamps attached. Each light compartment features usable dimensions of 10.875” wide x 10.875” deep x 31.75” tall. The lights are held in individual compartments created by a ½” marine grade plastic divider network. 2” Ester foam laminated with .125” thick white HDPE is positioned under each light to provide shock protection for each light. The foam/HDPE combo is soft enough to not damage the gel frame holders. A carpet lined accessory compartment is provided for additional storage.
18RU Double Wide Studio Furniture Grade Rack
This case was designed for Crossroads Church for use in their production studio. The rack is 18U tall and features a 26” deep shell.
Generic Monitor Case w/Heavy Duty Electric Lift
This case is designed for customers who already own a monitor who would like to handle the integration themselves. The case comes with a heavy duty electric lift installed with a mount, ready to receive your monitor.
Sacramento State 8 Drawer Sideline Drawer Trunk Workbox
This custom sideline trunk was designed for Sacramento State. The trunk features 8 drawers for storage.
Antari M7 Stage Jet Fog Machine Case - 4 Capacity
This case is designed to fit four Antari M7 fog machines. Each machine is held in a custom CNC cut foam insert that contours its shape including the wireless receiver, safety shackle, and handles. A 3.5” deep carpet lined accessory compartment is included for misc. items like True1 Cables, safety tethers, and clamps.
6 Space Preview Monitor Shallow Rack
This rack is designed to hold shallow equipment such as rack-mounted broadcast preview monitors and battery chargers. The rack features front rail that is recessed ½” from the lid split. Pre-tapped 10/32” rack rail is provided for easy installation. 1 lid mounted recessed handle is provided for transport.
14” x 14” Floor Tom Drum Road Case
This case is designed to hold a 14” floor tom drum. The case interior is lined with ½” PE Foam. A 1/4" marine grade plastic divider is provided to create a separate compartment for the floor tom legs. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.
Tonelux JC37 Stereo Pair Microphone Flight Case
This case is designed to hold 2 Tonelux JC37 microphones, the power supply, and the IEC cable. The foam insert is built from PE foam that is custom cut to contour each item. The microphones are located at the sides of the foam insert. Their tethered cables are pathed through the sides of the insert and stored below the power supply. A separate compartment is allocated for the IEC cable. Check out LM Tour System’s upgraded locking IEC cables for mission critical applications. The exterior case is built from LM’s XL Series aluminum. This series is based around custom mitered aluminum wrapped around ¼” plywood panels. The aluminum has integrated tongue and groove for a very strong seal. Surface mounted twist latched and a spring loaded handle are provided.
Shure Microflex Wireless System 10 Capacity
This case is designed to hold 10 mics and bases from the Shure Microflex wireless system. A removable tray holds 10 Shure MXC4200DF microphones in a custom CNC cut foam insert. Each of the MXCW640 bases are held in individual compartments below the tray.
Klang Fabrik Portable In Ear Monitor Work Station
This workstation is designed to hold the Klang Fabrik processor with all associated Shure Axient in ear components and a Dell touch screen monitor.
Road Case Style Wall Frame For LP Vinyl Record Album
A perfect way to display your favorite albums! Each frame is hand built one at a time in our shop in Youngstown, Ohio. The album frame is built out of flight case grade aluminum and features mini ball corners. The frame features an inner lip that allows you to use standard wall hangars. This is a must-have for the serious record collector and music enthusiast!
Portable Dual Outdoor Rated 55” Monitor Sideline Case
This case was built for Little Rock Parkview High School and is designed to hold 2 – 55” outdoor grade monitors mounted on a heavy duty electric lift. The system components were specified and installed by the LM Cases Custom Integration Department.
Custom Tour Truck Pack Trunk For The Backstreet Boys
This case was built for the Backstreet Boys for their 2019 tour. The case is designed to integrate in a 96” truck pack with exterior width and depth dimensions of 48” x 24”. These dimensions allow the trunk to pack in configurations of two, or four across depending on how the case is orientated. The trunk is built out of ½” plywood laminated with black ABS plastic. The interior is finished with black texture coating for durability and easy cleaning. The trunk features a full width ¾” plywood caster board with HD Colson 4” x 2” casters. The trunk features 4 Penn deep recessed handles, stacking caster wells in the lid, and recessed rear mounted lid stays.