Audio/Visual
Universal Audio Satellite & Apollo Waterproof Transport Case
This case is designed to hold a Universal Audio Satellite desktop DSP accelerator, Apollo audio interface, their power supplies, and Thunderbolt cables. Each item is held in a custom CNC cut PE foam compartment. An accessory area is located under the Satellite for its IEC cable and PSU. An accessory compartment is located under the Apollo for its “wall wart” style PSU. A 5.5” wide x 2.5” deep x 4.5” tall accessory compartment is provided for 2 Thunderbolt cables. The custom foam insert is mounted into a black Pelican 1450 case.
Shure® ULX-D 8 Capacity Hand Held Rack Drawer
This drawer is designed to fit 8 Shure ULX-D Hand held mics. Each compartment is sized to fit all Shure capsules. An accessory compartment is included for general storage. The CNC cut foam insert is glued into a 2RU 18” deep HD rack drawer. The rack drawer features a key lock for security.
ClearCom® HelixNet® 16 Capacity Belt Pack Drawer 3RU
This drawer is designed to hold 16 ClearCom® HelixNet® belt packs. Each belt pack is held in a custom CNC cut compartment. The foam insert is constructed out of PE foam. The insert is installed into a HD 3RU, 18” deep rack drawer.
Clearcom FreeSpeak II 5 Capacity 3RU Rack Drawer
This drawer is designed to hold 5 ClearCom FreeSpeak® belt packs, a ClearCom AC60 charger and batteries. An accessory compartment is included for misc. items. The PE foam insert is custom cut for each item. The foam insert is glued into the drawer.
D1 Power Distribution Box
The LM Tour Systems D1 power distribution box is designed to be a central power hub for mobile racks and integrated systems. Power is introduced to the box via the front Powercon connector. A blue status LED shows when power is present. The 20amp hydraulic master breaker provides control over all outlets and can serve as an on/off switch for systems. A front mounted Powercon loop outlet is provided for linking systems together. This outlet is configured post breaker. A front mounted courtesy duplex is provided with a dedicated 5-amp breaker. The rear of the unit features 3 duplex outlets for a total of 6 outlets in a close proximity configuration. A spaced Edison outlet is provided for larger “wall wart” style plugs that render plugs in a duplex configuration un-usable. An additional rear Powercon® outlet with a blue status light is provided for linking additional items. The D1 can be rack mounted from the front or rear via the removable ears. The unit features rounded front and rear face pieces for a streamlined look when using the unit without its ears attached in a stage box configuration.
2020 Amenities Case - Executive Elite
This case is designed to be a fully integrated craft services unit. The case features a bold wood grain laminate that emulates bourbon barrels. The case will stand out in any green room, office, or lobby. The case features a 4.5 cu. ft refrigerator, microwave, commercial grade Keurig®, grill, and Sonos® sound system. The case comes fully integrated with all items shown.
Compact Mobile Hospitality & Beverage Road Case with Fridge, Keurig & USB Power
This case is designed to be a fully integrated craft services unit. The case features a bold wood grain laminate that emulates bourbon barrels. The case will stand out in any green room, office, or lobby. The case features a 115 can refrigerator. The refrigerator features a digital temperature display, LED lighting, wire racks, and a glass display door. A commercial grade Keurig® is mounted on a slide out shelf. The Keurig® is held in place with a custom CNC cut piece of marine grade plastic to prevent movement during transport. A 20 capacity display rack is located next to the Keurig® to provide quick access to K-Cups. A LM Tour Systems power distribution unit is located above the Keurig®. This power distribution unit provides 8 Edison outlets, 8 high powered USB outlets and two Powercon outlets for expansion. 3 HD drawers are provided for storage. Each drawer is built out of ½” Baltic birch plywood and is laminated on the interior & exterior.
MA Lighting GrandMA 3 Compact Lighting Console Case
This case was built for Crossfade Design for their MA Lighting GrandMA 3 console. The console is held in a custom 2” PE lined compartment. Custom CNC cut Crosslink foam blocks hold the console at its palm rest and back. Holes are routed into the bottom foam to hold the console by its feet ensuring that it is always properly located in the case tray.
Portable Game Film Trunk With 60” TV
This case was built for West Memphis High School for portable game films. The case features a 60” monitor installed on a HD tour grade electric lift. The lift is controlled with a hardwired remote control that can either be used in the case or handheld. The monitor is wired to a custom IO box that features Neutrik® HDMI and Cat5 jacks. A recessed Hubbell power inlet is the main input source of power. A 25’ 12awg HD extra hard usage power cable is included.
2RU USB/Edison/Powercon® Power Distribution Unit
This power box is designed to provide 8 courtesy Edison and USB outlets to a work surface or rack. The power box also includes 2 Powercon® output jacks for expansion. Common uses for this box include tech work stations where a variety of power outlets are required. The box is constructed out of 1/8” brushed aluminum that is anodized black. Power is supplied via a 3’ HD SOOW cable terminated with a Hubbell Edison plug.
10 Drawer Large Format Production Workbox Case
This workbox was designed for the BackStreet Boys wardrobe department. The workbox features 10 drawers. Each drawer is built out of ½” Baltic Birch plywood, mounted on HD Accuride glides, and finished with black texture coating. A storage compartment is located above the top drawer in each section. The compartment is sealed with a removable ½” Marine Grade plastic lid. The drawers are built into a ½” plywood shell that is independent from the external case.
Chauvet Rogue R1 Wash Case - 6 Capacity
This case is designed to hold 6 Chauvet Rogue R1 fixtures in a custom CNC cut foam insert. Each fixture is stored lens facing down. The foam securely contours the shape of each fixture allowing safe travel even if the case is flipped. A 5.5” deep x 43.5” wide x 12.5” tall carpet lined accessory compartment is included to hold clamps, power, and safety cables. The case features 4” Colson casters (2 locking), 4 deep recessed handles, stacking caster wells, and recessed lid stays. The case is designed around a 90” truck pack with OD dimensions of 45” x 30”.
Art Gallery Mounting/Installation Work Station
This case was built for the Garth Greenan Gallery as a mobile work station used in art mounting and gallery installations. The case lid features a tilting frame that has 3 rods for mounting paper rolls. The frame is designed to hold 3 rolls of paper that are 6” diameter. For easier access, the frame tilts forward. It is secured with a cable latch with a central pull handle that secures the frame at the left and right side. The case lid is held in position with gas springs.
5 Drawer Production Workbox w/Hinged Lid & Flip Up Shelf
This case was built for Applied Audio as a generic catch all work box. The outer case is built out of ½” plywood laminated with your choice of ABS plastic colors. Each drawer is built out of ½” Baltic Birch and is mounted on HD Accuride drawer glides. The drawers feature a ½” plywood face with a recessed handle as a pull. All drawer edges are routed. The drawers are coated with clear lacquer inside and out.
Nikon D810 Camera System Pelican 1510 Case
This case was built for Elevate Life Church to hold a Nikon D810 camera body and lens kit.