Audio/Visual
Boise State University Communications Work Box
This case was built for Boise State University. The case is designed to hold CoachComm belt packs, headsets and accessories for the team.
27” iMac Video Production Fly Pack
This case is designed to hold a 27” iMac mounted on a position control board. The board is mounted to position control hinged that allow the computer to tilt and be held in position similar to a laptop screen. The computer is interfaced to the mount board via an articulating Chief mount that allows the computer to telescope away from the mount board and be moved to the right or left of the case. The computer is mounted to the Chief mount via an included Apple VESA mount adapter. Below the computer is a shock mounted 12 space rack that includes front & rear pre-tapped 10/32” rack rail. The rack includes a 1RU slide out shelf for the computer’s keyboard. The case includes table legs mounted in one of the lids. The case exterior includes 8 deep recessed handles and rides on 4” Colson casters mounted to a full ¾” plywood caster board.
Clear-Com FreeSpeak II Intercom System Case
This case was designed to hold a Clear-Comm FreeSpeak II system. The case holds the contents of the system in a CNC cut foam insert, mounted in a Pelican 1640 case. The foam insert holds 2 FSII-SPL splitters, 1 antenna compartment, 5 belt pack compartments, and 1 open accessory compartment. The case also features a removable tray that includes a removable rack shell that holds the FSII-Base-II and an open compartment for the head sets.
RCF TT052A 4 Capacity Speaker Case
This case was designed for Applied Audio to hold 4 RCF TT052A powered speakers. The speakers are held in 4 individual compartments. Each compartment is separated by a custom CNC cut ½” marine grade plastic divider with a routed in notch to make the speakers easier to handle. A removable 3/8” plywood tray is included for storage. The usable dimensions of the tray are 26.5” wide x 19” deep x 6” tall. The case exterior is built out of 3/8” plywood laminated with ABS plastic. The exterior features 4 deep recessed handles, 2 recessed lid stays, 4” Colson casters (2 locking), stacking caster wells and a route out for a McLoone dry erase road case label
Yamaha PM10 Rivage Mixing System Case Set
The console case is designed to hold the Yamaha CS-R-10 control surface, which is part of the PM10 Rivage system. The case holds the control surface on a ½” Baltic birch internal structure that traps the surface by its feet. The internal structure supports a slide out keyboard shelf at the front and a doghouse at the back. The control surface is supported by 2” PE foam at all points. CNC cut foam blocks that match the contour of the console are provided to ensure that all parts are supported during transport. The back of the control surface is covered and supported by a custom doghouse. The doghouse is built out of ¾’ Baltic birch and features a top lid that hinges flat against the back of the doghouse. The back of the doghouse also features 2 removable vented panels that secure with HD Southco slam latches.
Compact Flypack Production Workstation
This case is designed to be a portable video fly pack workstation. The case includes a Chief FTR1U tilting monitor mount allowing a monitor to be mounted in the case lid. Also included are two slide out shelves to hold a laptop, audio mixer or a video switcher. Below the dual slide out shelf’s is a 9RU rack section. The rack rails are mounted to the case via rubber vibration isolation mounts. The rack section features rear rack rail and a trap door. The case exterior is built out of 3/8” plywood laminated with your choice of ABS colors. The case features deep recessed hardware and rides on 4” Colson casters mounted on a ¾” caster board that spans the entire bottom of the case.
Akai APC40 MKII Pelican Case
This case is designed to hole a Akai MPC40 MKII Controller. The controller is held in a custom CNC cut foam insert built out of PE foam capped with a ¼” marine grade plastic top piece. The foam insert features 2 hand slots to help remove the controller and an accessory compartment underneath. The insert is built as an assembly, this assembly is mounted into a Pelican 1495 case.
Yamaha TF1 Mixer Case With Doghouse
This case was built for Audible Difference Inc. to hold a Yamaha TF1 mixing console. The console is held in a custom designed 2” foam interior. Holding the console in place in the case tray is a custom CNC cut 2” PE foam insert. The foam insert follows the tapered shape of the console allowing it to be supported along all points, not just the widest point. Cable connections to the console are hidden behind a custom doghouse. The doghouse is built out of ¾” Baltic Birch plywood and finished with black texture coating.
12RU 24” x 30” Truck Pack Shock Mount Rack
This case is designed for touring applications where truck pack dimensions of 24” x 30” are crucial. The case features a 3/8” plywood inner rack shell with front and rear rail with 10/32” pre-tapped holes. The inner shell features a rail to rail depth of 20.5” with .5” recess on the front and rear rails. The case features 3.5” deep front and rear lids which allow for a clearance of 4” extending beyond the front and rear rack rails. The inner shell is shock mounted with 2” foam above and below, with 1” foam protecting the sides.
Custom Portable Entertainment Center Road Case
This case was designed for the Bubble Group as a portable entertainment center. The case comes fully integrated with a 55” Sony smart monitor, Xbox One, PlayStation 4, Apple TV, courtesy charging USB power outlets and a digitally controlled full range audio system.
2RU Airline Carry On Fly Rack
The LM Cases 2 Space Pelican™ 1510 Mini Fly Rack is a compact airline carry-on rack case designed for touring engineers and production professionals transporting critical rack-mounted equipment. Built into a genuine Pelican 1510 case with a CNC machined Baltic Birch rack interior, the case provides durable protection for fly dates, playback rigs, RF systems, recording gear, and AV equipment.
Universal Audio Apollo Twin/Duo Case
This case is designed to hold the Universal Audio Apollo Twin desktop recording interface. The interface us is held in a custom CNC cut PE foam insert. A storage compartment is included to hold the power supply and Thunderbolt cable. The exterior case features a spring loaded surface mounted handle and 2 twist latches.
Nvidia Compact IT Workbox
This case was designed for Nvidia to be a portable workbox for their trade show IT department. The case is designed to help support smaller shows where space is a concern.
32 RU Portable Server Noise Isolation Rack
This case was designed for Nvidia to be a portable server rack for use at trade shows. The case holds 32RU of gear in a shock isolated inner shell to prevent damage to the delicate servers. To dampen the noise of the server fans, the inner shell features 10 ultra low noise cooling fans and 3/8” thick clear Lexan doors at the front and back of the shell.
Miami Dolphins Projector/Document Camera Workstation
This case was designed for the Miami Dolphins to display video and photos for team presentations. The case features a projector, and a document camera attached to a top work surface. The system is designed with quick setup and tear down in mind. All components are permanently wired allowing the user to simply remove the case lids and plug the system into a power source.