Audio/Visual
Christie 1.5-2.00 Zoom Lens Case
This case was designed for SmartSource Rentals to hold a Christie 1.5-2.00 zoom lens. The lens is held in a custom CNC cut foam compartment. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and features 1 recessed handles.
Boeing 6 Capacity Monitor Trade Show Shipping Case
This case was designed for Boeing to transport 6 monitors for use on a custom display cart. The case holds 3 Samsung 60" & 75" monitors in an upright configuration. Due to the size of the monitors, the design allows them to slide into compartments so minimal lifting is required to load and unload the case.
Oxygen Event Works 4RU Pull Over Rack
This case was built for Oxygen Event Works for video processing equipment. The case features a removable 4RU inner rack shell and an independent foam lined exterior case.
Oxygen Event Works Audio Adapter Trunk
This case was built for Oxygen Event Works as a way to carry miscellaneous parts and adapters for audio systems. The trunk features 2 removable trays for adapters and removable dividers in the main compartment for segregating cable and other items. The case and trays are made from high quality Baltic Birch and finished in gray texture coating.
Installed Brahler Microphone Workbox
This case was designed to be an installed workstation for Conference Systems. The case holds 40 Brahler TMD/01 gooseneck microphones, D-Doc and D-Mic bases in 9 custom drawers. The case lives in a venue and never sees road use, all drawers are held closed by 2 hinged panels secured with large valance spanning latches.
L3 Noise Reducing Server Isolation Rack
This case was designed for L3 Power Paragon as a portable solution to reduce the noise of their ruggedized servers that were being used in an office environment. The case provides a 16RU shock mounted rack section for the servers, in addition to a 1RU LCD Console section and a 4RU patch section. The case is designed to target specific fan noise frequencies and reduce them by 15 - 20 decibels. The case works by enclosing the servers and moving large amounts of air around them to keep them cool. Several fans pull cold air in through the bottom and additional fans exhaust the hot air through the top of the case. Each ultra quiet fan is rated at 18 decibels.
Evonik Portable Server Rack
This case was built for Evonik Industries as a way to transport servers to and from events. The case features a 12RU server section with a dedicated 1RU KVM section and a 4RU patch section. In addition to the rack sections, the case also features a storage drawer for power cables and other accessories. The case features a custom rack panel, PDU and fans installed by the LM Cases Custom Integration department.
2017 Signature Amenities Trunk
This self-contained mobile concession case functions as a portable cafeteria, integrating a refrigerator, microwave, electric grill, Keurig beverage maker, and Bose Sound Dock III into a single tour-ready unit. Designed for green rooms, locker rooms, and event spaces, it features heat-resistant compartments, slide-out shelves, custom-contoured mounting, three heavy-duty drawers, and centralized power with a retractable 30ft extension cord. Built from 3/8" plywood with black ABS laminate, recessed hardware, and 4" casters, it delivers durable mobility and turnkey convenience.
48 Capacity Charging Flight Case
This case is designed to be a mobile charging and storage solution to hold 48 devices in individual compartments. There are 3 - 16 port USB charging hubs that also function as sync units that allow data to be pushed to 16 devices simultaneously.
32 Capacity iPad Charging Pelican Case
This case is designed to be a portable charging solution allowing USB devices like tablets and phones to be charged on the road. The charging components also allow the devices to be sync'd and updated in groups of 16 at a time for fast updates and data pushes. Each unit is stored in its own individual compartment. The case features a vented clear Lexan lid that allows the units to be locked while they are charging. The vented Lexan lid allows the devices to remain cool as well as visible when they are securly charging.
Radial Workhorse Cube 500 Series Chassis Case
This case is designed to hold a Radial Engineering Workhorse Cube 500 Series chassis. The case holds the chassis in a custom CNC cut foam insert that allows the knobs on each card to "float" without coming into contact with the side walls of the foam insert. The foam insert holds the chassis and the power supply. The exterior case is built out of 1/4" plywood laminated with your choice of ABS plastic colors, the exterior case features 3 recessed handles.
Radial SixPack 500 Series Chassis Case
This case is designed to hold a Radial Engineering SixPack 500 Series Chassis. The case holds the unit in a custom CNC cut foam insert that allows the knobs on each unit to float and not come into contact will the walls of the foam insert. In addition to holding the SixPack by its sides a slot is incorporated into the lid to accommodate the handle for rock solid placement, there is also a slot for the units power supply. The foam insert is mounted in a waterproof Pelican 1560 case.
Radial Firefly Tube DI w/JR2 Footswitch Case
This is a custom waterproof case for the Radial Firefly Tube DI, JR2 Footwitch and power cable. The case holds each component of the system in a individual compartment custom cut to form fit each item. The foam insert is made out of high quality PE foam that is cut on a CNC machine and mounted in a Pelican 1450 case.
Chauvet Rogue R1 6 Capacity Case
This case was designed to hold 6 Rogue R1 light fixtures in a 96" x 90" truck pack configuration. The case is 48" wide x 30" deep allowing it to be half packed in a 96" truck and third packed in a 90" truck.
MA Lighting MA on PC / Faderwing Workstation
This case was designed for New World Symphony to be an all in one workstation for their MA Lighting MAonPC and FaderWing. The case holds the two controllers in custom CNC cut plastic brackets that contours the shape of each unit and keep them securely mounted. The case is designed to hold 2 monitors mounted on a position control board allowing them to be tilted in any position within a 180 degree range. All wiring is enclosed in a custom doghouse that includes a 2RU patch section for an IO panel. The case also includes a slide out tray for a keyboard.