Audio/Visual
Panasonic RZ970 Projector Case w/Lens Storage
This custom case is designed hold a Panasonic RZ970 projector with a separate lens compartment. The projector is held in a custom CNC cut, PE foam insert. A 14” x 14” x 1.75” accessory compartment is located under the projector for small parts and cables. A separate lens compartment with dimensions of 7” x 7” x 7.75” is also provided for storage. An additional carpet lined accessory compartment is provided for larger items.
Sony PVM-X2400 24” Monitor Case
This custom case is designed to fit the Sony PVM-X2400 4K Trimaster high-grade picture monitor. The case holds the monitor in a custom CNC cut foam insert. The monitor is held in a “face up” position. The case exterior is built from ¼” plywood, laminated with charcoal ABS plastic. The case features 3 recessed handles and a custom silkscreen of the Panavid logo.
Barco TLD .4:1 90 Degree Lens Flight Case
This case is designed for the Barco TLD .4:1 90-degree projector lens. The lens is held in custom CNC cut crosslink foam cradles. The lens is supported at all stress points. The nonabrasive foam prevents scratching and allows the lens to be transported without its lens caps attached.
24ch IEM Rack w/Mic Split Panel
This custom, fully integrated in ear monitor rack was built for Spirit Of The Bear. The system is based around a Behringer X Air XR18 mixer. It includes a Shure PSM300 IEM transmitter, a Luxul router, Unifi access point, a modified Tripp Lite RS1215 and a custom built 24ch mic splitter panel with a custom laser etching of the band’s logo.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
4 Space Fly Rack For Deep Equipment
This 4RU portable flypack is designed with deeper rack equipment in mind. The removable rack shell is built from ½” Baltic Birch plywood. The rack is finished with black textured coating and features 2 deep recessed black handles and large rubber feet. Pre-tapped, 10/32” rack rail is provided at the front & rear positions. 2 rail recess options are provided at ½” and 1”. These recess options allow you to have rail-to-rail depths of 18”, 17.5” and 16”. A custom CNC cut PE foam insert protects the rack with 2” foam at all points. 2” are left open at the front and rear of the rack for any cables or protruding equipment. An accessory compartment is provided under the rack shell for storage.
Audio Technica 4047/SV Stereo Pair Microphone Case
This heavy-duty carrying case is designed for two Audio Technica 4047/SV large diaphragm condenser microphones. The case features a custom cut, PE foam insert that contours the shapes of the microphones and shock mount baskets. The foam insert is designed to hold 2 AT 4047/SV mics, 2 AT 8449a/SV shock mounts and a generic compartment for a K&M stereo bar.
6 Drawer Video Workbox
This video tech workbox was built for Kelson Productions in NYC. The custom built workbox features 6 heavy duty drawers, 3 of which have configurable dividers.
5 Drawer Workbox w/270 Degree Fold Flat Front Hinged Lid
This custom 5 drawer workbox was built for IKO Productions. The case features an OD of 24” x 30” with a 270 degree fold flat front door.
Yamaha CL3 Mixing Console Case
This custom road case is designed for the Yamaha CL3 console. The console is protected by 2” foam blocks at all key stress points. Custom Crosslink foam pieces are located in the nose lid that contour the shape of the console’s palm rest. A custom doghouse covers the I/O section of the console. The doghouse is built from ¾” Baltic Birch plywood and is finished with black texture coating. The lid features double hinges allowing it to swing fully back for full access to all connections.
Chamsys MagicQ MQ 70 Compact Console Case
This custom case is designed to fit the Chamsys MagicQ 70 lighting console. The case features a custom CNC cut PE foam lined interior that contours the shape of the console. A cut out is provided in the bottom of the insert for the console’s movable kick stand.
Panasonic ET-D75LE10 Projector Lens Case
This custom SKB iSeries case is designed to hold the Panasonic ET-D75LE10 projector lens. The case features a custom CNC cut foam insert built from crosslink foam. Crosslink foam is nonabrasive, allowing the lens to be transported without its caps attached.
Panasonic ET-DLE170 Projector Lens Case
This custom SKB iSeries case is designed to hold the Panasonic ET-DLE170 projector lens. The case features a custom CNC cut foam insert built from crosslink foam. Crosslink foam is nonabrasive, allowing the lens to be transported without its caps attached.
Allen & Heath CTi1500 Mixing Console Road Case w/Doghouse
This custom case is designed for the Allen & Heath CTi1500 console. The console is held in place during transport via custom CNC cut foam blocks. A custom doghouse keeps IO connections neat. The doghouse is built from ¾” Baltic Birch that is finished with black textured coating. The lid uses double hinges allowing it to fold back allowing for full access to all connections. A ½” black texture coated board traps the console by its feet ensuring that the console remains firmly mated to the doghouse.
Electric TV Lift Case For Backstage/Dressing Room/Stage Wings
The portable media center with rack section is designed to be a customizable entertainment center with green rooms, stage wings and portable offices in mind. The base case comes with a Sony 55” monitor mounted on an electric lift. A studio grade sound system including 2 full range monitors with 8” woofers and 2 – 10” subwoofers are provided. A central 16U rack section is provided allowing users to add control processors and or drawers as needed.