Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 20-0628
Chamsys MagicQ MQ 70 Compact Console Case
This custom case is designed to fit the Chamsys MagicQ 70 lighting console. The case features a custom CNC cut PE foam lined interior that contours the shape of the console. A cut out is provided in the bottom of the insert for the console’s movable kick stand.
The exterior case is built from LM Cases’ XL Series aluminum. This custom extruded aluminum features integrated tongue and groove for a firm mate and lock between the lid and the tray. The XL extrusion is wrapped around a ¼” piece of plywood laminated with your choice of ABS plastic colors. The exterior features 2 surface mounted twist latches and a surface mounted spring-loaded handle.
To purchase this case from our online store, CLICK HERE.
- REFERENCE: 20-0628
- CATEGORY: Audio/Visual
Related Products
Custom Workstation For Follow Me Tracking Mouse & Fader Set
This case is designed to be a portable fully wired workstation for Follow Me tracking equipment.
Custom Workstation Road Case For A ETC Apex 5 Lighting Console
This custom workstation was built for Walt Disney World to hold a ETC APEX 5 lighting console. The workstation will be used in an outdoor venue and brought out for shows. The workstation features a slide out shelf for the console with power, a pole mounted monitor attached to an articulating mount, a rack section and storage drawers.
Clay Packy Arolla Profile MP 2 Capacity Light Fixture Case
This custom case was built for Mohegan Sun Casino for the Clay Packy Arolla light fixture. The case holds 2 fixtures in custom CNC cut PE foam compartments. Each foam block contours the shape of the fixture. The fixtures ride with their lenses facing down allowing them to be truss mounted in the case. A carpet lined accessory compartment is provided for general storage.
Arri S120C Skypanel Case
This case is designed to hold 2 Arri S120C Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Arri S30C Skypanel Roadcase
This case is designed to hold 2 Arri S30 Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Chauvet Color Strike Road Case - 6 Capacity
This custom road case is designed to hold 6 Chauvet Color Strike lights. Each fixture is held in a custom CNC cut foam compartment. A large 46.5” x 6.75” x 16.125” carpet lined accessory compartment is provided for misc items.
Arri S60 Skypanel Case - 2 Capacity
This case is designed to hold 2 Arri S60 Skypanels. Each fixture is held in a custom cut PE foam insert that contours its shape. The foam insert is designed to accommodate the fixture’s barn doors. A removable tray is included to hold the power supply and any cables or accessories.
Varilite VL2600 Profile Light Road Case
This custom flight case is designed to hold 2 Varilite VL2600 Profile light fixtures. Each fixture is held in a custom CNC cut, PE foam insert that contours the shape of the light fixture. The usable interior height of the case from the bottom of the insert to the lid foam is 34”.
MA3 Command Wing Workstation Road Case
This custom road case is designed for the MA Command Wing. The MA Command Wing is held in place via custom marine grade plastic brackets within a ½” Baltic Birch structure. The structure includes a ¾” Baltic Birch doghouse behind the controller to keep cables hidden. Within the doghouse, a 4-Plex courtesy outlet bank is provided for accessory items like a small computer. A right angle, locking IEC is provided for powering the control surface. A 1RU keyboard/mouse unit is provided for control.
Elation FuzePar z120 Light Fixture Case - 6 Capacity
This case is designed to hold 6 Elation FuzePar z120 light fixtures. The case interior is carpet lined with 1” PE foam under each light fixture. The lights are separated via a ½” black marine grade plastic divider network. 2 removable carpet lined trays are provided for accessory storage.
Elation Level Par Q7 Light Case - 6 Capacity
This case is designed to hold 6 Elation Level Par Q7 light fixtures. The case interior holds each fixture in a custom PE foam lined compartment. The case exterior is built from 3/8” plywood laminated with your choice of ABS plastic colors. The exterior features 4 deep recessed handles, 4” Colson casters, stacking caster wells and recessed lid stays.
Chauvet ColoRado Solo Batten Road Case - 3 Capacity
This case is designed to hold 3 Chauvet ColorRado Solo Batten fixtures. Each fixture is held in a custom PE foam lined compartment. A carpet lined accessory compartment is provided for misc storage. The case exterior is built from ½” plywood laminated with your choice of ABS colors. The hardware set features 4 deep recessed handles and stacking caster wells in the lid. Recessed lid stays are provided. The case rides on Colson 4” x 2” HD casters mounted through a full sized ¾” caster board.
Aputure Nova P300C 2 Capacity Road Case
This is case is designed to hold 2 Aputure Nova P300C light fixtures. The custom cut PE foam insert holds both fixtures in separate compartments with their fly yokes attached. There is enough space within the case to allow mounting clamps to remain attached to the yokes. A separate compartment is provided for the unit’s soft box diffusers to be stored in their factory bags. A removable tray is provided for accessory storage. This tray also features a custom foam insert for the extendable control box.
Chauvet Rogue R1 Beam Wash Road Case
This case is designed for the Chauvet Rogue R1 Beam Wash fixture. 6 lights are held in a custom CNC cut, PE foam insert. The insert allows spacing for clamps to remain attached to each light. The case is built from 3/8” plywood laminated with Hexagrip exterior finish. The exterior features 4 deep recessed handles, stacking caster wells in the lid, and recessed lid stays. The case rides on 4” casters mounted to a full sized ¾” plywood caster board.
Chauvet Maverick Storm 1 Wash Case
This case is designed to hold 2 Chauvet Maverick Storm 1 Wash light fixtures in custom cut PE foam inserts. The case design allows clamps to remain attached to the fixtures for easy deployment. The case exterior is built from 3/8” plywood laminated with your choice of ABS plastic colors. The case rides on 4” casters with a full sized ¾” caster board. The exterior features recessed lid stays to ensure the lid remains open during loading and unloading. 2 deep recessed handles are provided.
GrandMA3 Light Console Road Case
This case is designed for the MA Lighting GrandMA 3 Light console. The console is held in a custom CNC cut; PE foam lined interior. Custom arch shapes are cut into the foam to protect the console’s screen hinges. A custom ½” marine grade plastic keyboard drawer is provided under the console for additional storage.
MA onPC Command Wing / Fader Wing Flight Case FOH Workstation
This case was designed to be an all in one, pre-wired workstation for MA Lighting, onPC Command Wing, and Fader Wing controller. The case holds each of the control surfaces in place via custom brackets that contour each of the unit’s shape. Touch screen monitors are mounted on HD Ergotron arms, allowing multiple placement options. Custom rack mount panels provide access to all necessary connections.
MA Lighting Grand MA 3 Full Size Console Road Case
This case is designed for the MA Lighting GrandMA 3 Full Size console. The console is held in a custom CNC cut; PE foam lined interior. Custom arch shapes are cut into the foam to protect the console’s screen hinges. A custom ½” marine grade plastic keyboard drawer is provided under the console for additional storage.
Elation CW Profile HP Ellipsoidal Light Fixture Road Case - 6 Capacity
This case was built for Nvidia. The case is designed to hold 6 Elation CW Profile light fixtures with their clamps attached. Each light compartment features usable dimensions of 10.875” wide x 10.875” deep x 31.75” tall. The lights are held in individual compartments created by a ½” marine grade plastic divider network. 2” Ester foam laminated with .125” thick white HDPE is positioned under each light to provide shock protection for each light. The foam/HDPE combo is soft enough to not damage the gel frame holders. A carpet lined accessory compartment is provided for additional storage.
Chamsys QuickQ 30 Lighting Console Road Case
This heavy duty case is designed to hold the Chamsys Quick Q30 lighting console. The console is designed to be permanently held in the case tray, with the top larger lid being removed for use. A custom CNC cut foam piece is located in the case tray to accommodate the console’s unique feet. An accessory compartment is included under the console to hold an iPad and other accessories. An additional storage compartment to the right of the console is provided and includes a cup holder. The case exterior is built out of 3/8” plywood laminated with your choice of ABS colors.