Audio/Visual
University Of Nebraska Video Workstation
This case was designed for the University Of Nebraska. The project was handled by LM Cases' in house integration department that worked with the University Of Nebraska from the initial concept through the final production process. All the equipment was provided by LM Cases for a complete turn key solution.
D&B Q10 Speaker Case
This case was built for Overland Pro Audio. The case is designed to be a combination lift off/hinged lid which we refer to as our "M-Style" case closure. The case tray features a CNC cut insert to nest the trapezoidal cabinets next to each other. The hinged top portion of the lid hold all the rigging accessories and cables needed to fly the two cabinets.
LM Cases “Pimp” FOH Chairs
When a standard chair wont do....its time for the ultimate fly maneuver: LM Cases Pimp Chairs. These chairs are built out of 3/8" plywood laminated with black leather and outfitted with white shag that is enough to bring a tear to Shaft's eye...and that aint no jive!
Heavy Duty Feeder Cable Trunk “Sammy Size”
This trunk is designed to be the backbone of your show, pack your heaviest cables inside and stack gear on top; this trunk is designed to take any abuse you can throw at it. The trunk is built out of 3/4” Baltic Birch that is glued, stapled and screwed together. The case sides feature interior wood cleats for additional strength and the case lid features 3/4” Birch alignment strips to keep the case square even under extreme load. The case features a removable 3/4” Baltic Birch divider that splits the interior in two equal compartments. To add rigidity, the case employs a 1.5” thick bottom and 4” x 2” Colson Encore casters. All hardware is double recessed into the exterior to provide as flat of an exterior surface as possible. The case exterior is finished in black texture coating and features black powder coated hardware to help the case blend in backstage environments.
Nikon D60 Case - Pelican 1400
This case was designed to hold a Nikon D60 camera and accessories. The case features 4 separate storage compartments for the camera body, lens, charger, and accessories. The case also features a storage pocket in the lid for any manuals or paper work.
38 Capacity Mic Stand Case
This case was designed for Forty Two Inc. The case is designed to hold 20 tall mic stands, 18 low profile stands and accessories. The case features a 3/8" marine grade plastic divider network to accommodate either straight or boom stands, the case also features a 3/8" plywood accessory box designed to round stand bases.
Eiki LC-X80 Lens Case - Pelican 1510
This case was designed for Wagner Media. The case is designed to hold a Eiki LC-X80 projector lens. The case features a CNC cut insert installed into a Pelican 1510 case. The insert is cut out of ester foam and capped with crosslink foam which allows the lens to be placed in the insert with out lens caps and not scratch the glass.
Avid Digidesign Venue Profile ATA Case
This case was designed for the Audio Visual Professional Group. The case is a 3 piece console case with a removable top and front lid. The removable top lid features 2 foam lined compartments for up to 19" widescreen monitors, there are also 2 slide out keyboard trays under the console.
Mohegan Sun Third Pack Cable Trunk w/Custom Foam Logo
This trunk was designed for Mohegan Sun Casino. The case has exterior dimensions of 30" x 30" x 24" to allow it to be packed 3 wide in any configuration in a 90" truck. The interior of the case features custom inlaid foam that had the Mohegan Sun logo as well as "Video" for the video department at the casino.
Nexo 45 n-12 Monitor Case
This case was designed for Nomad Sound. The case is designed to hold 2 Nexo 45 n12 monitors on their sides to achieve an exterior truck pack dimension of 30" x 24". The wedges are held in a custom CNC cut insert to hold the unique angle of the cabinets. The angled pieces of foam were cut on our fast wire CNC saw and the outlines of the cabinets were cut on our reciprocating knife CNC saw.
Nintendo Mac Pro Workstation
This case was built for Nintendo Of America. The case is designed to hold a Mac Pro tower and peripherals. There is a pull out shelf mounted on HD Accuride glides for a keyboard/laptop as well as two divided compartments for additional storage.
Avid SC48 Flight Case
This case was built for Maryland Sound International. The case is designed to hold the SC48 in on a foam shock mounted structure that is built to make the doghouse and keyboard tray a single unit. The case also features an accessory compartment as well as a built in mouse pad to the right of the console.
Midas XL3 EXT 16 Channel Extender Case
This case was built for Concert Productions. The case is built out of 1/2" plywood laminated with purple ABS, and features a 2 piece removable lid, 3/4" birch hi-gloss doghouse, and 4" casters.
Custom LM Cases Mic Trunk
This case was built using our Econo #2 design. The case features a removable tray with a custom CNC cut foam insert to hold 8 Shure SM57/58's, 3 Shure Beta98's, 4 Shure Beta91's, 1 Shure Beta 52, 2 Sennheiser MD421's, and 4 Radial JDI's.
28 Capacity Waterproof iPad Case
This case was designed to transport 28 Apple iPad's to and from trade shows. The design is based around a Pelican 1660 case and features a custom CNC cut insert to hold each iPad in a foamed compartment. The case design also allows storage for the iPad's power supplies.