Audio/Visual
Line 6 XD-V70 Wireless Mic Case
This case was designed for the Audio Visual Professional Group. The case holds a Line 6 XD-V70 wireless mic system in a custom CNC cut foam insert. The insert holds the microphone in its factory case as well as the receiver, antennas, power supply & cables.
Shure ULX/P Wireless Mic Case
This case was designed for Visual Aids Electronics. The design is based around a Pelican 1550 case, the case features a custom CNC cut foam insert to hold the wireless system. Each component of the system is held in a custom foam lined compartment. This allows both VAE and their customers to realize if a piece of the system is missing before sending or returning the case to and from a rental.
Samsung UN55D8000YF Monitor Case
This case was designed and built for Boeing. We spec'd our "E-Style" monitor case for their particular transportation application due to the extremely high level of protection the case offers. The E-Style design utilizes an interior and exterior case to hold the monitor. The interior case is a 3/8" lift off lid style case that allows the user to place the monitor face down in the thin tray of the inner case, while the larger top portion is then latched on. This allows for easy loading and unloading of the monitor, the top lid section has a large open section in the center to accommodate for the monitor's wall mount.
Soundcraft Vi1 Case
This case was designed for KM Productions NY. The case features a removable front and top lid, allowing easy access to the front of the console during a show. The bottom tray features a 2 rack space section for a drawer and or keyboard shelf. The interior case also features a custom 3/4" Birch doghouse that contours the rear profile of the console. The doghouse features a double hinged top which allows the top cover to fold completely back for easy access. This doghouse also has a hinged back panel allowing the entire back and top of the doghouse to fold open.
Custom Novation/Akai DJ Controller Case
This case was designed for Nate Edwards, DJ extraordinaire at Sweetwater. The case is based around an Apple iPad 2, which serves as the sound module of the rig. Control is provided by 2 Akai LPD8's and a Novation Nocturn. These items are held in a custom foam insert which allows all the items to remain in a user friendly position and wired together. In order for all of the equipment to remain flush with the top of the insert, we cut custom angled foam blocks to match any contour in the gear; a picture of the angled foam blocks under the Novation Nocturn is shown below. The case lid features custom angled foam blocks to contour each piece of gear so they will stay secure in the foam insert no matter how the case is transported. The foam insert sits on an angled rack which has 1RU in the front and 2RU in the rear and features a removable bottom for easy wiring. The 1/2" Baltic Birch rack is finished with a black textured coating, and can be used at a stand alone unit or used in the case tray.
Presonus Studio Live 24.4.2 Case
This case is designed for the Presonus StudioLive 24.4.2. The case interior is lined with 1" foam and is designed to allow easy access to the i/o section of the board as well as the front headphone jack. The exterior case is built out of 3/8" plywood and features a pull off latched lid and 3 handles.
Yamaha IF2205 Speaker Case
This case was designed for Yamaha Commercial Audio. The case is designed to hold 6 Yamaha IF2205 speakers in a custom CNC cut foam insert. There is also a large accessory area for flyware or any cables.
LM Cases Custom Cadillac Trunk
This case was built for Pete's Big Tvs, the case is our standard Cadillac size of 43.75" x 21.125" x 29.375". The case us built out of 1/2" plywood and features airline cable lid stay, 6 - 4" casters & 10 handles.
Canon WUX 4000 Projector Case
This case was designed for Canon USA. The case holds a Canon WUX 4000 projector in a 2" foam lined compartment. The interior also features a 2" recessed cable area for misc storage.
Custom Mac Pro Workstation Case
This case was designed for Situation Interactive. The case is designed to hold 6RU of rack mounted gear, as well as a Mac Pro tower, accessories and a rack mounted slide out shelf on the bottom of the case. The Mac Pro tower is held in a 2" foam lined compartment with a piece of white HDPE plastic on the bottom for easy loading and unloading of the tower. To the right of the computer compartment are 2 carpet lined storage compartments for prepherials; below the storage compartments is a removable 3/8" plywood storage caddy. There is a total of 8 RU of storage in the case, 6 RU on top of the case for equipment and 2 RU below for a slide out rack mountable shelf.
Bose L1 Speaker System ATA Case
This case was built for Visual Aids Electronics. The case is designed to hold a complete Bose L1 Speaker system. The system subwoofer is kept in a hinged storage compartment in the front of the case. The foam is notched on the compartment lid to allow the lid to sit just beyond 90 degrees so the lid will not fall when loading and unloading the sub. The speaker columns are stored above the subwoofer compartment. The speaker column pedestal is stored on its side in a foam lined rear compartment
Christie 1.5-2.0SX 1.4-1.8HD Lens Case
This case was built for Tekamaki. The case is designed to hold the Christie 1.5-2.0SX 1.4-1.8HD lens for separate shipment with their Christie HD 10KM projector. The case features a custom CNC cut foam interior to perfectly contour the lens.
Video Flypack Rack w/Monitor
This case was designed for RCI Sound Systems. The case features 12RU equipment section with a 32" deep rack shell. The HP L2105 monitor is mounted on a Premier AM50-B mount. The mount allows the monitor to articulate as well as spin from landscape to portrait viewing positions.
Pelican 1150 Hard Drive Case
This case is designed to hold 7 firewire hard drives. The case features a custom CNC cut insert with a removable foam plug to accommodate either 4 or 7 drives.
Yamaha PM5D Road Case
This case was designed for Maryland Sound International. The case is built out of 1/2" plywood laminated with Armor-Tuf fiberglass. The case features a 10" Birch doghouse, 2 slide out keyboard shelves mounted on Accuride glides, 14 Handles, 4" x 2" HD casters, a recessed PAL label dish, recessed asset bar code dishes and a custom silkscreen of the MSI logo.