Audio/Visual
Presonus 16.0.2. Case – LM XL Series
This case is designed for the Presonus 16.0.2. mixing console. The case is part of our XL Series line of cases, these cases feature a custom aluminum extrusion wrapped around a 1/4″ piece of plywood. The aluminum extrusion utilizes an interlocking tongue and groove to allow for strong lid and base alignment. The aluminum and plywood panel combination results in a strong, lightweight and inexpensive case.
The mixer is surrounded by 1″ foam and has a 2″ deep accessory compartment below the mixer. The exterior case is equipped with 2 surface mounted twist latches and 3 surface mounted spring loaded handles. Any of our standard colors are available at no additional charge.
Craftsman Tool Chest ATA Case Workbox
This case was designed for Hitachi Medical Systems for use in setting up their trade show booth. The case holds a 40″ Craftsman tool chest in a custom ATA case so Hitachi can take their tools on the road.
The case features a removable front lid and a hinged top lid allowing full access to all features of the tool chest. The case interior is lined with hard 1″ PE foam providing maximum support and durability for a life on the road, the case exterior is built from 3/8″ plywood panels and features 4″ Colson casters.
Special thanks to Hitachi Medical!
Presonus StudioLive 16.4.2 w/Integrated iPad Doghouse
This case is designed to hold the Presonus StudioLive 16.4.2. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam piece to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
A Designs REDDI Waterproof Hard Case
This custom case by LM Cases is precision-designed to protect the A-Designs REDDI tube direct box with a CNC-cut PE foam insert that supports the unit and preserves access to its controls. Housed in a waterproof Storm case, it also includes a dedicated compartment for the power cable—rugged, secure protection for a premium piece of gear.
Summit Audio Half Rack Processor Case – 2BA-221/TLA50/FeQ-50/TD-100
This case is designed to fit all Summit Audio half rack audio processors including the: 2BA-221 preamp, FeQ-50 EQ, TLA-50 compressor and the TD-100 DI. The case holds each unit in a custom CNC cut foam insert that contours the front and rear allowing the knobs and switches to remain untouched. There is storage below the unit for the power cord. The foam is mounted in a Pelican 1470 case this both lightweight and completely waterproof.
Presonus Studiolive 24 With iPad Integrated Doghouse
This case is designed to hold the Presonus StudioLive 24. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam pieces (see picture below) to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
World Wrestling Entertainment Portable Media Rack Center
This project was handled by our Custom Integration department. The process started with WWE and LM working together on gear selection and how the media rack would function in the brutal WWE touring environment. The rack needed to handle a wide variety of input signals to fulfill its duty as a multi format portable preview unit. The LM Custom Integration department handled everything from the sale and installation of the equipment to the custom metal work needed for rack panels and doors.
Indoor Sports Storage Cart
This cart was designed for indoor sports and as an organizational cart for gyms. The cart is built to be exceptionally durable and easy to push. To accomplish this, we employed 5″ casters with a central locking brake system. To engage the brakes, simply push down on the red pedal; this simultaneously engages both brakes. The case also features a large 18″ stainless steel push handle for exceptional maneuverability.
The cart top is lined with 1/2″ UHMW plastic to provide a non stainable durable surface for water coolers and liquids. The cart interior features 2 built in drawers mounted on HD Accuride glides and 4 removable plastic tubs. The interior compartment is covered by a removable lid that is stored magnetically to the back of the cart when it is in use.
The cart exterior features 4 recessed handles and 2 spring loaded D-Ring shackles. The D-Ring shackles are great for mounting anything from ball bags to additional carry cases, adding another level of functionality. 2 coated cables with carabiners are included with the case for use with the D-Ring shackles.
Custom Holm AH17DX216A Monitor Lift Case
This case was designed for Visual Aids Electronics. The case holds a Holm AH17DX216A monitor. The monitor is suspended in a foam lined compartment to allow it to be used in the case and transported to events.
The case is built out of 3/8″ plywood and features 3.5″ casters and a trap door to access all the monitor inputs.
Installed Rack/Mixer Station
This case was built for Custom Media Services. The case is designed to be installed into a gym that teaches spinning classes. Our design was based around a user teaching a class on a spinning bike and operating all of the equipment within the rack.
The horizontal mixer section of the rack is covered with a clear Lexan door to ensure that if the teacher leans over the mixer mid workout they will not sweat on the console. The media is controlled via a Crestron controller which is recessed into the top of the rack behind the mixer section. The media is held on a 22″ Apple iMac computer mounted just behind the Crestron controller.
The rack is built out of 3/4″ Birch and finished with our proprietary black textured coating.
Special thanks to CMS!
Samsung UN40EH6000F 40″ Monitor Case
This case was designed for PSAV. The case holds a Samsung UN40EH6000F 40″ LCD monitor and accessories. The monitor is stored against a large center divider and surrounded by 2″ foam to provide maximum protection. The exterior case is built out of 3/8″ plywood and features stacking caster wells in the lid, 3.5″ casters, a 2 color custom silkscreen of the PSAV logo and 6 recessed handles.
Special thanks to PSAV!
Sigma Flame Effect Case
This case was designed for Pyrotechnico to hold 2 Sigma Services Flame effects. The effects are laid down and cradled in custom foam cavities. The controller and cables are stored in separate foam lined compartments for organization and protection on the road.
The exterior case is built out of 3/8″ plywood and rides on 3.5″ casters.
Special thanks to Pyrotechnico!
Cisco CTS500-32 Monitor Case
This case was designed for Cisco Systems. The case holds one Cisco CTS500-32 monitor with the base attached. The monitor is cradled in a custom foam lined compartment, the case interior also features a 4" black carpet lined accessory compartment.
Yamaha Subkick Case
This case is designed for the Yamaha SKRM-100 Sub Kick. The Sub Kick and stand are held in a custom CNC cut foam compartment. The stand compartment is designed to hold the collapsed base and mount as one unit.
50 Capacity Acer Iconia Case
This case was designed for Imperial Trading and was handled by our in house Custom Integration department. The case is designed to hold 50 Acer Iconia tablets in the upright position. The tablets are held in custom crosslink foam inserts which accommodates the tablets as well as each tablets power cord. Crosslink foam is considered a Class A scratch free surface to ensure the tablets will not scratch inside the case.