Audio/Visual
Portable Video Fly-Pack Case
This case was designed to be a portable pre-wired video fly pack. The case features dual 24" Dell Ultrasharp monitors, dual 4 space shock mounted racks, a stationary work surface, a retractable switcher work surface, and dual 9 space shock mounted racks below the switcher.
FOH Chair Case
This case was built for Volt Lites. The case is designed to store the rolling chair and support items used during shows. The chair compartment is lined with 1" PE foam covered with white HDPE plastic to allow the chair to slide in and out without damaging the foam. Below the chair compartment is a large drawer mounted on HD Accuride glides. There is also a storage compartment in the lid to hold a table.
Behringer X32 ATA Workstation
This case was designed for Digerati Audio Visual Systems. The case is designed to be used for fixed installation applications where the workstation needs to be removed from a closet and plugged into a house PA system.
90 Capacity iPad Charging Case
This case was designed for the Philadelphia Eagles by the LM Cases Custom Integration department. The case features 90 individual compartments with custom cables to charge the teams iPads when they are on the road. The case is designed to be locked while the iPads are charging inside.
Midas Venice F16R Case
This case is designed for the rackmounted version (F16R) of the Midas Venice F16 mixing console. The case features angled foam blocks that contour the rack ears of the console and trap it in the case without touching the knobs or faders. The case tray features plastic strips the prevent the feet from sinking into the foam. The exterior case is built out of 1/4" plywood (thicker plywood is available on request) to keep it as lightweight as possible. The console can be used in the case tray.
Waterproof Coles 4038 Microphone Case
This case was designed for Washington & Lee University for a Coles 4038 mic. The mic is cradled in a custom CNC cut foam insert that contours the mic and attached stand mount at different elevations to ensure maximum protection. The foam insert also accommodates the 4069 3 pin to XLR adapter. The foam insert is housed in a Pelican 1300 waterproof case.
GrandMA2 FOH Workstation Case
This case was designed for Volt Lites by the LM Cases Custom Integration Department to be a fully integrated front of house workstation for large scale tours. The LM Cases CI department handled the sale and installation of many of the case components such as the video monitors, audio monitors, mounts, custom cables, and rack mounted components.
The case design is centered around the GrandMA 2 Fullsize lighting console which is mounted on a retractable shelf. Because each show is programmed and run from the console, the case needed to have 2 distinct "Live" and "Program" modes. In Live Mode, the console is retracted over the case and the 2 monitors are moved over the audio monitors so the operator can see the stage. In Program Mode, the console can be extended from the case allowing the programmer to sit with their legs under the console like a traditional desk. The console sits on 4 pedastals that hold it by its feet to keep it firmly in place during use and provide additional shock protection during transport. The console is also held by 2 lid mounted dividers that separate the console from the speaker enclosures. The pedastals are made out of PE foam and marine grade plastic. The monitors can also be move over the rear of the console for maximum visibility. The LM Cases CI department created a Powercon inlet and custom cable to allow the console to be powered via the locking Powercon connectors.
The Dell 23" LCD monitors are mounted on articulating arms allowing them to swing over the console and monitors and be spun between portrait and landscape modes. The video switching between computers, the console and media servers is handled by a 4 in 4 out video switcher.
The audio playback system is based around a 2.1 KRK speaker system compromised of 8" monitors and a 10" subwoofer. Custom black texture coated foam lined enclosures were created to hold the 8" monitors allowing all components to be firmly mounted during transport.
All rack mounted equipment is housed in a 11RU shock mounted double wide rack under the console. The rack section is built out of 1/2" plywood laminated with silver abs plastic allowing a more reflective surface in case equipment needs to be serviced during a show. Cooling is provided by 9 fans pulling air from the outside and cooling both rack sections as well as the computer section to the right of the rack.
The exterior case is built out of 1/2" plywood and features 4" x 2" Colson casters, deep recessed hardware and a 2 color silkscreen of the Volt Lites logo. The top lid has 4 recessed D-Ring shackles mounted in it to allow a table to be strapped to the top of the case during transport. Because the case will be forklifted on to a FOH platform, LM Cases custom 1/4" aluminum forklift guard was employed. The forklift guard is contours the aluminum corner stock of the case and wraps under to provide extra protection when the case is lifted.
Special thanks to Matt and the Volt Lites team!
United Sound 8 Drawer Audio Workbox
This case was designed for United Sound & Electronics. The case is built out of 1/2" plywood and features 8 drawers built out of 1/2" Baltic Birch, the drawers are built into a 1/2" inner shell isolating them from the outer case. The inner shell prevents the drawer glides from being damaged from pulling on the handles or any impacts. Each drawer is treated with our black texture coating to provide a durable surface for abuse on the road. One drawer features a 30 capacity microphone insert that was CNC cut from Ester foam.
iMac Production Workstation
This case was built for Starlight Visual. The case is designed to be a self contained mobile lighting production solution that is plug and play. The LM Cases Custom Integration (CI) department installed and provided many of the electronic components including the 2RU i/o panel, keyboard, mouse, rack drawer, rack shelf, powerstrips and electrical connections prior to shipment to Starlight Visual for the final assembly.
Roland V-800HD Switcher Case
This case was designed for a Roland V-800HD switcher as a mobile workstation that can be quickly set up. The case holds the switcher in a custom rack mount compartment and features a pre drilled VESA pattern in the lid for mounting a monitor. The switcher compartment not only securly holds the unit, it also has a trap door to allow cables to be hidden for a sleek finished look. The exterior case is built out of 3/8" plywood.
National Symphony Wardrobe Case
This case was built for the National Symphony Orchestra. The case features 4 hanging clothes compartments and 8 - 3/4" Baltic Birch laquered drawers. The case is built out of 1/2" plywood and features 4" Colson casters.
Evertz Microsystems Custom Rack
This case was designed for Evertz Microsystems. The case is designed to hold a custom 40 space unit that weighs 800lbs! The unit needs to travel to different venues and be set up. To accommodate this, heavy duty Colson 4" x 2" casters were used on the rear lid to allow the case to be shipped, and fit through a standard door. The case and unit are extremely heavy; the case is designed to be mechanically lifted by the inner rack shell. In case a forklift or crane are not available, 28 deep recessed handles were used to allow the case to be manually lifted.
Epson Document Camera & Projector Case - Pelican 1620
This case was designed to hold a Epson document camera and projector. The design is based around a Pelican 1620 case and features a custom CNC cut foam insert to hold the document camera, projector and accessories.
Canon XF305 Camera Case - Pelican 1620
This case was built for Graybow Communications. The design is based around a Pelican 1620 case that features a custom cut foam insert for the camera and 2 compartments for support components.
Lycian Super Arc 400 Follow Spot Case
This case was made for Forty Two Inc for a Lycian Super Arc 400 follow spot. The fixture is held in a custom foam lined interior that accomodates all protrusions and levers. The exterior case is built out of 3/8" plywood and features stacking casters cups and 3.5" casters.