Audio/Visual
Meyer UPJ Speaker Case
This case was designed for the Audio Visual Professional Group. The case is designed to hold 2 Meyer UPJ cabinets and yoke assemblies. The cabinets are held in 1" PE foam lined compartments with 2" PE foam under each unit. The yoke assemblies are held in black carpet lined compartments, power cables and clamps are stored inside the yoke compartments.
Yamaha CL5 Case
The case features a strategic foam lined interior, all surfaces not covered in foam are treated with our black textured coating. Foam touches the console only at specific points allowing for substantial cost and weight savings. The consoles wood arm rest is cradled in a custom CNC cut Crosslink foam insert holding it in place and also protecting it from scraching. Operation manuals, Littlelites and cables are held on either side of the "Yamaha" foam block under the console. The rear of the console is covered by an 8" Baltic Birch doghouse that black texture coated.
12 Space Portable Video Server Rack
This case was designed for the University Of Nebraska's football video department. The case is designed to hold the departments video servers for road games.
Nintendo Wii U Burn Case
This case is part of a set designed for Nintendo to take to shows to work on software development; all electronics were installed and sold by the LM Cases Custom Integration (CI) department. The case is designed to be a mobile workstation that houses two computers and two specialized Wii U card writers. The computers share a monitor that is mounted in the case lid on a fully extendable rotating articulation mount allowing the monitor to be placed in any position needed for working. The case lid is supported by gas shocks to aid in the opening and closing process.
Mini Core Trunks
The LM Cases Mini Core Trunks were designed to be an excellent lightweight companion to our standard Core Trunk. (CLICK HERE for more info on the Core Trunk) The Mini Core Trunks have exterior dimensions of 22" wide by 22" deep and 18.5" tall and weigh 32lbs. The trunks are built out of a lightweight 3/8" honeycomb plasic and feature recessed lid stay's, 4 deep recessed handles, a black carpet lined interior, and stacking cups and feet. The trunks are designed to stack on each other and the regular Core Trunk (when equipped with the stacking option).
Apple Mac Pro ATA Workstation Case
This case was designed and built for Swank Audio Visual. The case features a custom compartment for a MacPro tower, pull out keyboard shelf, drawer and custom patch panel built by our Custom Integration department. Swank wanted to have the ability to leave the case closed and locked at show sites, to accomplish this our Custom Integration department designed a custom patch panel that made all of the inputs and outputs of the MacPro tower accessible while the case lids were on. The panel includes, 2 cat5's, 3 Displayport's, 3.5mm audio ports, 2 Firewire 800 ports, 3 USB's and a Powercon connector. The CI department also mounted fans on the back lid to take care of ventilation.
12RU Pocket Door Amp Rack
This case was designed for Oxygen Lightworks for D&B D12 amplifiers. The case features pocket style doors that are designed to open and fold back into the sides of the case on heavy duty glides. Pocket Door racks save time during set up and provide an excellent solution to the age old problem of what to do with your case lids. The inner rack shell is fully shock mounted and is 24" deep rail to rail to accommodate the amplifiers as well as power distro units. The exterior dimensions are 24" x 30" to fit into standard truck pack configurations. The case is built out of 1/2" plywood and features 4" Colson casters, deep recessed handles and stacking caster wells.
RED Rack: Noise Reducing Production Rack
The LM Cases RED Rack is designed to be the pinnacle portable noise reduction chamber for your studio equipment. With over 2 years of testing and development we are proud to share our RED Rack with you!
Waterproof Half Width Rack Case
This case is designed to hold half width rack mounted components like wireless microphones, recording interfaces and processors. The rack portion of the case is built out of 1/2" baltic birch plywood and features front & rear rack rail. The rack is finished with our black textured coating. The exterior case is a Pelican 1560 with a custom CNC cut foam interior. The case is completly waterproof and features a retractable handle and wheels.
Sony PDW 700 Camera & HDVF-EL Viewfinder Cases
These cases were designed for the University Of Florida's WUFT TV. The cases feature custom cut CNC foam inserts to store the individual components that make up each equipment set. Each of the cases are built from 3/8" plywood laminated with blue ABS plastic and silk screened with the orange Gators logo.
University Of Oregon Chooses LM Cases For Portable iPad & Notebook Charging Case
This case was designed for the University Of Oregon to be a portable charging workstation for the team when they are on the road. The electronoics were spec'd and installed by our in house custom integration department.
8 Capacity Elation Design Brick 70 ATA Case
This case was built for the Audio Visual Professional Group to hold 8 Elation Design Brick 70 light fixtures. The case holds each fixture in a 1" PE foam lined compartment with 2" of PE foam under each unit. The case interior also features a large accessory compartment for cables.
Panavid Chooses LM Cases For Custom Projector & Lens Case
The case was designed for Panavid Inc to accommodate a variety of projectors and lenses for rental applications. A unique challenge with any rental house is how to transport a projector with the correct lens for each unique job. Because Panavid rents the lenses separately from the projector, simply storing the lens in the projector case was not an option; separate lens cases needed to be created.
Waterproof Case For Presonus 16.0.2. Mixer
This case was designed for the Presonus 16.0.2. mixer. The design is based around the Storm iM2720 waterproof case and features a custom CNC cut foam insert. The mixer slides into the insert by placing the arm rest in first. The foam insert holds the mixer from the top as well as the sides to provide maximum protection for your mixer. Under the mixer is a combination storage compartment that contours your iPad, below the iPad compartment is additional storage for cables. The iPad compartment is designed around an iPad in an Otterbox to accommodate most all aftermarket iPad cases.
The storm case features dolly casters and an extendable handle for easy transport.
Presonus 16.0.2. Mixer Roadcase
This case was designed for the Presonus 16.0.2. mixer. The case is built out of 1/4″ plywood and features a telescoping aluminum handle and inboard dolly casters. There is a storage compartment under the board for storage that is large enough to fit an iPad.