Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 19820
Summit Audio Half Rack Processor Case – 2BA-221/TLA50/FeQ-50/TD-100
This case is designed to fit all Summit Audio half rack audio processors including the: 2BA-221 preamp, FeQ-50 EQ, TLA-50 compressor and the TD-100 DI. The case holds each unit in a custom CNC cut foam insert that contours the front and rear allowing the knobs and switches to remain untouched. There is storage below the unit for the power cord. The foam is mounted in a Pelican 1470 case this both lightweight and completely waterproof.
- REFERENCE: 19820
- CATEGORY: Audio/Visual
Related Products
Studio Control Room Storage Rack/Workbox - 6U Solid Walnut
The studio control room storage rack is designed to hold rack mount equipment and peripherals in a decorative unit for installed applications. The rack is perfect for home studios, conference rooms and houses of worship where a high quality, aesthetically pleasing storage solution is required.
18RU Double Wide Studio Furniture Grade Rack
This case was designed for Crossroads Church for use in their production studio. The rack is 18U tall and features a 26” deep shell.
Radial HDI Direct Box Waterproof Pelican Case
This case is designed to hold the Radial HDI and its power cable in a custom CNC cut foam insert. The insert is designed to contour the HDI and hold it while allowing the knobs and switches to float freely without contacting the sides of the foam. The foam insert is free standing and integrates into a waterproof Pelican case.
Radial HDI Active Direct Box Carrying Case
This road case is designed to hold the Radial HDI Active Instrument Direct Box. The case holds the HDI in a custom CNC cut insert that is designed to hold the unit without putting pressure on the knobs or switches. The custom foam insert also holds the unit’s power cable. Check out the LM Tour Systems family of locking IEC power cables if you would like to upgrade your power cable. Our XL Series cases feature a lightweight aluminum lid and body with integrated tongue and groove wrapped around a ¼” piece of ABS laminated plywood with your choice of colors.
Video Streaming Fly Pack w/Articulating Monitor Arm & 16RU Rack
This case is designed with mobile audio and video productions in mind. The 3 axis monitor mounting system allows the display to be angled in a sitting or standing position, extended, and moved to the left or right of center. A position control board handles the monitors angle. Friction hinges are used allowing the screen to be raised to a vertical position or laid flat. These friction hinges allow the monitor to behave in the same manner as a laptop screen: the screen can be positioned in any position along a 90 degree plane without the need for ratcheting mechanisms or support rods. A Chief K2W120B mount is installed to allows the display to be positioned left or right of center, in addition to 15” of extension towards the user.
Universal Audio Satellite & Apollo Waterproof Transport Case
This case is designed to hold a Universal Audio Satellite desktop DSP accelerator, Apollo audio interface, their power supplies, and Thunderbolt cables. Each item is held in a custom CNC cut PE foam compartment. An accessory area is located under the Satellite for its IEC cable and PSU. An accessory compartment is located under the Apollo for its “wall wart” style PSU. A 5.5” wide x 2.5” deep x 4.5” tall accessory compartment is provided for 2 Thunderbolt cables. The custom foam insert is mounted into a black Pelican 1450 case.
Compact Flypack Production Workstation
This case is designed to be a portable video fly pack workstation. The case includes a Chief FTR1U tilting monitor mount allowing a monitor to be mounted in the case lid. Also included are two slide out shelves to hold a laptop, audio mixer or a video switcher. Below the dual slide out shelf’s is a 9RU rack section. The rack rails are mounted to the case via rubber vibration isolation mounts. The rack section features rear rack rail and a trap door. The case exterior is built out of 3/8” plywood laminated with your choice of ABS colors. The case features deep recessed hardware and rides on 4” Colson casters mounted on a ¾” caster board that spans the entire bottom of the case.
Universal Audio Apollo Twin/Duo Case
This case is designed to hold the Universal Audio Apollo Twin desktop recording interface. The interface us is held in a custom CNC cut PE foam insert. A storage compartment is included to hold the power supply and Thunderbolt cable. The exterior case features a spring loaded surface mounted handle and 2 twist latches.
Radial Workhorse Cube 500 Series Chassis Case
This case is designed to hold a Radial Engineering Workhorse Cube 500 Series chassis. The case holds the chassis in a custom CNC cut foam insert that allows the knobs on each card to "float" without coming into contact with the side walls of the foam insert. The foam insert holds the chassis and the power supply. The exterior case is built out of 1/4" plywood laminated with your choice of ABS plastic colors, the exterior case features 3 recessed handles.
Radial SixPack 500 Series Chassis Case
This case is designed to hold a Radial Engineering SixPack 500 Series Chassis. The case holds the unit in a custom CNC cut foam insert that allows the knobs on each unit to float and not come into contact will the walls of the foam insert. In addition to holding the SixPack by its sides a slot is incorporated into the lid to accommodate the handle for rock solid placement, there is also a slot for the units power supply. The foam insert is mounted in a waterproof Pelican 1560 case.
Radial Firefly Tube DI w/JR2 Footswitch Case
This is a custom waterproof case for the Radial Firefly Tube DI, JR2 Footwitch and power cable. The case holds each component of the system in a individual compartment custom cut to form fit each item. The foam insert is made out of high quality PE foam that is cut on a CNC machine and mounted in a Pelican 1450 case.
Sonnet RackMac Pro Flypack Case
This flypack system was designed for the Farm League. The system is based around a Sonnet MacRack Pro mounted in a 6RU rack housed in a Pelican 1630 case.
Presonus 24.4.2. Audio Flypack Workstation
This case was built for Creative Live as the audio portion of a portable audio & video mobile rig, CLICK HERE to see the matching video case. The case features a rack mount section for the Presonus StudioLive 24.4.2 with a video monitor mounted in the lid above the console. The lid features 3 large barn doors to keep the glare down as well as prevent light pollution from the monitor on dark sets. Below the mixer section is a 16 space rack section and 4 drawers.
Carlson Audio Mobile Pro Tools Recording Flypack
This case was designed for Carlson Audio Systems as a portable recording fly pack. The case features a 27" Apple Cinema Display monitor mounted on an articulating mount on a position control board. The case also features storage for 2 Yamaha HS10 monitors, Apple MacPro tower and a 10 space shock mounted rack section.
Custom Direct Box Case
This case was designed for Savion Glover Productions to hold 40 Radial J48 DI's and 10 Countryman Type 85 DI's. The DI's are stored in 2 layers and color coded for easy identification for faster setup's and load out's. The Radial J48 DI's are held in a CNC cut PE foam insert with a white marine grade plastic top layer to protect the foam over time. The 10 Countryman DI's are stored in a removable tray with the same style marine grade plastic/PE foam insert. Also included is a separate tray for patch cables and other accessories.
Portable Video Fly-Pack Case
This case was designed to be a portable pre-wired video fly pack. The case features dual 24" Dell Ultrasharp monitors, dual 4 space shock mounted racks, a stationary work surface, a retractable switcher work surface, and dual 9 space shock mounted racks below the switcher.
RED Rack: Noise Reducing Production Rack
The LM Cases RED Rack is designed to be the pinnacle portable noise reduction chamber for your studio equipment. With over 2 years of testing and development we are proud to share our RED Rack with you!
A Designs REDDI Waterproof Hard Case
This custom case by LM Cases is precision-designed to protect the A-Designs REDDI tube direct box with a CNC-cut PE foam insert that supports the unit and preserves access to its controls. Housed in a waterproof Storm case, it also includes a dedicated compartment for the power cable—rugged, secure protection for a premium piece of gear.
Avalon U5 Pelican 1450 Case
This case was built for dmr-rents.com. The case is designed around a Pelican 1450 waterproof case. The U5 is cradled in a custom cut foam insert that accommodates the ground lift switch in the back of the unit as well as front controls. The front of the unit is supported with a pice of foam that lies between the "speaker to input" and "active to thru" buttons on the front of the unit. The insert also accommodates the units rubber feet and provides storage for the power cable.
10 RU Recording Outboard Rack
This case is designed to hold rack mounted outboard gear as well as a computer keyboard and mouse, the case will be used in a mobile production environment as well as in a studio. The rack is complementary to our sound isolation rack, where the computer and hard drives are stored in the isolation rack; the mouse, keyboard and monitor are located on the outboard rack. This is beneficial in studios that use mixing consoles, the case can be placed perpendicular to the mixer and allow the user a place to hold their computer monitor, mouse and keyboard; while the isolation rack that holds the computer can be kept at a distance.