Plastic Case
Summit Audio Half Rack Processor Case – 2BA-221/TLA50/FeQ-50/TD-100
This case is designed to fit all Summit Audio half rack audio processors including the: 2BA-221 preamp, FeQ-50 EQ, TLA-50 compressor and the TD-100 DI. The case holds each unit in a custom CNC cut foam insert that contours the front and rear allowing the knobs and switches to remain untouched. There is storage below the unit for the power cord. The foam is mounted in a Pelican 1470 case this both lightweight and completely waterproof.
Athletic Trainers Zoll AED Transport Case
The response kit its based around a Pelican 1600 case. The kit includes a custom foam insert to hold a Zoll AED Plus, bag valve mask, scissors and a blood pressure cuff. The case also comes equipped with a two layer storage unit in the lid for small items like an epi-pen and first aid items.
The case interior is lined with Crosslink foam, which is a closed cell; class A surface. This means that the case interior will not absorb liquids and can be easily cleaned. The top of the foam insert is covered in 1/4″ black plastic for maximum durability.
The response kit is designed to be portable and water proof so athletic trainers can use it for all sports and in all conditions. Its yellow color makes it easily visible for quick access in emergency situations.
Portable Athletic Trainers Tape Kit
This case is designed to be a light weight waterproof solution for the mobile athletic trainer. The case features a removable plastic bin with a removable tape caddy that hold 120 rolls of 2″ tape. Below the bin are 6 compartments with removable plastic dividers that can hold anything from cold packs and bandages to stethoscopes and portable AED’s. The case comes complete with a handy erasable white board mounted in the case lid.
The exterior case is a Pelican 1630 which is completely waterproof and features an unconditional lifetime guarantee.
Avalon U5 Pelican 1450 Case
Custom Pelican 1450 case with a precision-cut foam insert designed to securely hold and protect the Avalon U5. The insert provides clearance for rear controls, supports the front panel without stressing switches, accommodates the unit’s rubber feet, and includes storage for the power cable—delivering a clean, durable, and tour-ready transport solution.
Pelican Xbox 360 Kinect Case
This case was designed for PSAV. The case is designed to hold an entire Xbox 360 system and games in a Pelican 1650 case. The system components are held in a custom CNC cut insert that allows each item(s) to have an individual foam lined compartment.
Shure ULX/P Wireless Mic Case
This case was designed for Visual Aids Electronics. The design is based around a Pelican 1550 case, the case features a custom CNC cut foam insert to hold the wireless system. Each component of the system is held in a custom foam lined compartment. This allows both VAE and their customers to realize if a piece of the system is missing before sending or returning the case to and from a rental.
Pelican 1150 Hard Drive Case
This case is designed to hold 7 firewire hard drives. The case features a custom CNC cut insert with a removable foam plug to accommodate either 4 or 7 drives.
Nikon D60 Case - Pelican 1400
This case was designed to hold a Nikon D60 camera and accessories. The case features 4 separate storage compartments for the camera body, lens, charger, and accessories. The case also features a storage pocket in the lid for any manuals or paper work.
Eiki LC-X80 Lens Case - Pelican 1510
This case was designed for Wagner Media. The case is designed to hold a Eiki LC-X80 projector lens. The case features a CNC cut insert installed into a Pelican 1510 case. The insert is cut out of ester foam and capped with crosslink foam which allows the lens to be placed in the insert with out lens caps and not scratch the glass.
Custom Pelican-Hardigg ACS AL4024-1305 Caster Case
This case was designed for a custom caster company to hold their sample casters. The case features a custom multi-layered insert in a Pelican-Hardigg AL4024-1305 case. LM Cases fabricated custom caster mounts and added 3.5" Colson Poly Hi-Tech casters to the case. The insert was cut out of 4lb PE foam in our CNC foam shop.
28 Capacity Waterproof iPad Case
This case was designed to transport 28 Apple iPad's to and from trade shows. The design is based around a Pelican 1660 case and features a custom CNC cut insert to hold each iPad in a foamed compartment. The case design also allows storage for the iPad's power supplies.
Alesis DM5 & Control Pad Electronic Percussion Case
This case was designed to hold an Alesis DM5, Alesis Control Pad and all the necessary support cables to power each device. The Alesis DM5 is mounted into a custom built rack shell that features the mounting post for a Roland APC-33 clamp, both the Control Pad & the DM5 rack feature the Roland APC-33 mounting post.
Xbox 360 Pelican Case
When you are on the road for months at a time, the smallest creature comforts of home can keep you stress free! In this scenario, the band wanted to take their Xbox 360 on the road. The concept is based around a Pelican 1550 case with a custom CNC cut foam insert. The insert is designed to carry the Xbox 360, its large power supply, 6 controllers and 6 games.
Pelican 1400 Smaart RTA Kit
This case was designed for the Audio Visual Professional Group. The unit is designed around a orange Pelican 1400 case and features a custom insert that holds the LM provided Audix TM1 and M-Audio Fast Track Pro.
Pelican 1740 Drum Hardware Case
Finally a perfect case to transport stands! When you need something a little stronger than a canvas bag, check out the Pelican 1740 case. This amazing box can swallowed up 6 cymbal stands, a snare stand, and a hi-hat stand with room to spare! Not to mention that it can do all of this and weight only 24lbs empty! This little box also is completely waterproof and features a lifetime guarantee!