Products
1930 National Lap Steel Case
This case was designed for a 1930 National Lap Steel guitar. The case features a custom CNC cut foam interior that contours the shape of the lap steel covered with black crushed velvet. The exterior case is built from our XL series light weight aluminum.
Evertz Microsystems Custom Rack
This case was designed for Evertz Microsystems. The case is designed to hold a custom 40 space unit that weighs 800lbs! The unit needs to travel to different venues and be set up. To accommodate this, heavy duty Colson 4" x 2" casters were used on the rear lid to allow the case to be shipped, and fit through a standard door. The case and unit are extremely heavy; the case is designed to be mechanically lifted by the inner rack shell. In case a forklift or crane are not available, 28 deep recessed handles were used to allow the case to be manually lifted.
Test Identifier Case
This case was designed to hold a Biological Identifier Kit. The case features custom CNC cut foam inserts for each of the delicate components. The interior case features a 3/8" removable tray with a generic storage area mounted below. The exterior case is built out of 3/8" plywood and featured deep recessed handles & 3 field replacable inboard dolly casters.
HEPA Filter Case
This case was designed for a HEPA filter & hook up accessories. The components are held in a custom CNC cut foam insert that is custom cut to form fit each item. The exterior case is built out of 3/8" plywood and featured deep recessed handles.
Discount Dance Supply Wardrobe Case
This case was built for Discount Dance Supply to be used at trade shows as well as performances. The case is part of a system of cases that connect to each other providing hanging bars between cases. The interior features gray texture coating and hanging clothes bars for storage. Each section has LED lights for use when backstage, the separate sections also feature black carpet covered hinged flaps that secure to the top of the case as a spot to Velco banners and signs to. Each section also features a large drawer mounted on HD Accuride glides and finished with black and gray texture coating.
PennCare Portable Emergency Medical Station
This case was designed and built for PennCare as a "point of medical care" for EMS responders first on scene. The case is designed to hold medical supplies in a heavy duty portable format allowing the case to be used in the field for disaster response or in hospitals during increased surges in patients. The case features 3 drawers made out of 1/2" Baltic Birch plywood that are finished with wipeable black texture coating. The case features a white Formica work surface with 6 Tilt Lock bins mounted in the case lid. The removable font lid features table legs that allow the lid to be quickly converted into a table for an additional work surface.
Roland V-Piano ATA Case
This case is designed for the Roland V-Piano. The case is built out of 3/8" plywood and features a 2" foam lined interior. The case features 3 handles and field replaceable 3" inboard dolly casters.
Epson Document Camera & Projector Case - Pelican 1620
This case was designed to hold a Epson document camera and projector. The design is based around a Pelican 1620 case and features a custom CNC cut foam insert to hold the document camera, projector and accessories.
Canon XF305 Camera Case - Pelican 1620
This case was built for Graybow Communications. The design is based around a Pelican 1620 case that features a custom cut foam insert for the camera and 2 compartments for support components.
Eaton Electrical Switch Pelican 1690 Case
This case was built for the Eaton Electric Corp as a salesman sample case. The design is based around a Pelican 1690 case and features a CNC cut foam insert for the switch. The insert holds the switch with the lever facing down to make it easier to remove from the case. The insert accomodates the power handle in the up or down position.
Lycian Super Arc 400 Follow Spot Case
This case was made for Forty Two Inc for a Lycian Super Arc 400 follow spot. The fixture is held in a custom foam lined interior that accomodates all protrusions and levers. The exterior case is built out of 3/8" plywood and features stacking casters cups and 3.5" casters.
1959 Fender Bassman Road Case
This case was designed for the backline department of Mohegan Sun casino. All of the combo amp cases for the casino are designed to be the same size allowing them to easily stack in the limited storage space of their arena.
Topcon Medical Slit Lamp Case
This case was designed for Topcon Medical to transport their delicate Slit Lamps to trade shows. The case features multiple compartments for various sizes of the companies models. Each compartment is foam lined to match a particular unit and its accessories. The two halves of the case are divided by a foam lined hinged door keeping the contents in each compartment during transportation
Custom Sports Nutrition Trunk
This trunk was designed for the University Of Georgia. The trunk features several removable plastic and wire bins for fresh fruit storage, the wire bins are designed to hang off of the side of the trunk. The top of the trunk hinges open to reveal a black dry erase board and cork board for messages. The front of the trunk is removable and features table legs for a additional serving surface.
Boeing F18 Flight Simulator Case
This case was designed to hold the forward portion of a Boeing F18 flight simulator for use during trade shows. The case features a 2" PE foam lined interior wrapped in black carpet to allow for shock absorption and durability.