Products
Custom Fender Stratocaster Case
This case is designed to your cradle your Fender Stratocaster in a custom CNC cut Ester foam insert that supports the guitar at its varying heights. The foam insert is designed to hold all models of Strat with all head stocks and body contours. The Ester foam insert is hand wrapped with black crushed velvet to ensure the most delicate touch to your instrument. The exterior case is built out out 1/4” plywood to ensure that the case is a light as possible. This case is designed to allow your guitar to be checked on commercial airlines and provide you piece of mind that your instrument will be safe; no matter how rough the handling.
Vox AC15 Amp Case
This case is designed for the Vox AC15 combo amp. The amp is held in a 1” Ester foam lined interior with a 2” PE foam bottom under the amp. The exterior case is built out of 3/8” plywood and features 4 latches, 2 deep recessed handles and 4” Colson casters with a full 3/4” Birch caster pad.
Christie WU12KM Projector Case
This case was designed for AdvanceConcepts to hold a Christie WU12KM projector and two lenses. The projector is held in a 2" foam lined compartment while the lenses are held in a custom removable lens case. The lens case is built out of 1/2" Baltic Birch plywood finished with black texture coating. The lens case can be stored or transported independently of the exterior case allowing maximum flexibility for rentals.
27” Apple iMac Travel Case
This case was designed for Starlight Visual to hold a 27" Apple iMac. The monitor is designed to be transported screen up with custom foam blocks contouring the back of the monitors. The stand fits into a recessed foam compartment allowing the monitor to ship as an assembled unit with out modification. The screen rides face up resting on a piece of Crosslink foam mounted in the lid. Crosslink foam is a Class A surface designed to touch delicate glass items like glossy monitor screens and projector lenses. The custom CNC cut foam insert also includes compartments for a full size Apple keyboard and two additional compartments for mice and cables.
ETC Source Four Ellipsoidal Case - 4 Capacity
This case was designed for Panavid to hold 4 ETC Source Four fixtures with clamps attached. The case features a hinged top and dual opening front lids allowing the fixtures to only be lifted a few inches to be loaded and unloaded from the case. Each fixture is held in a separate carpet lined compartment with a 2" PE foam bottom. A piece of 1/4" Marine Grade plastic is laminated to the PE foam of each compartment which prevents the fixtures from damaging the foam. The lids feature deep compartments for the storage of Powercon and DMX cables.
WWE Divas Wardrobe Workbox
This workbox was built for World Wrestling Entertainment as a wardrobe storage case for the Divas costumes. The case features 5 drawers built out of 1/2" Baltic Birch plywood mounted on HD Accuride glides. The drawers are mounted in a shell that is independent from the exterior case which prevents any damage to the drawers during rough handling. The case also features 4 shelves mounted in the lid for additional storage.
Custom Surgical Tray Transport Case
This case was designed to transport surgical instrument trays. The case features 4 compartments with removable, adjustable 3/4" Birch shelves to accommodate trays of varying sizes. Each removable shelf is carpet lined in the center and black painted at the edges to allow easy removal.
Hillsdale College Custom Athletic Trainers Sideline Kit
This trunk was designed for Hillsdale College as a custom athletic trainers workbox used on the sideline at games. The trunk holds medical items ranging from tape and bandages to a strecher board.
Discount Dance Supply Portable Merchandise Case
This case was built for Discount Dance Supply to hold and display merchandise at trade shows. The case is designed to be loaded up at the DDS shop and shipped to shows to double as a transport/display case. The case features a gray texture coated interior with a hanging bar for costumes. The front lids swing open and feature slat wall allowing standard retail hooks to be used for selling small items. The interior also features a flip up board that is covered with black carpet allowing signs to be attached with Velcro. The LM Cases Custom Integration department mounted LED lights to the roof of the case to ensure proper illumination during shows.
Smart Technologies Trade Show Workbox
This workbox was designed for Smart Technologies as a way to transport tools and peripheral equipment to build their trade show booth's. The case is intended to be a central tool box holding everything from extension cords and office supplies, to hand tools and back up system components.
Yamaha LS9-16 Case With Doghouse
This case was designed for VAE to house a Yamaha LS916 console. The case features a 1” Ester foam lined interior with custom blocking at the palm rest and by the integrated screen. A 8” deep doghouse built out of high quality 3/4” Baltic Birch finished with black texture coating hides the I/O section of the console for a sleek finished look perfect for corporate events. The exterior case is built out of 3/8” plywood laminated with your choice of ABS plastic and features 3 recessed handles and 3.5” casters with a full 3/4” Birch caster pad.
Portable Marching Band PA System Case
This case was designed for the Palen Music Center to provide an on field PA system control case that can be towed on the field with a Gator, ATV or pickup truck for a marching band's half time show. The case is designed around a Presonus Studiolive 24.4.2 mixer and has 3 shock mounted racks for equipment storage.
Portable Photo Booth System
This system was designed for Wenning Entertainment as a complete modular photo booth system. The system is compromised of 2 parts: a top case that holds the camera, lights and computer; and a bottom accessory case that holds the printer, paper, extension cords and replacement ink.
Custom Clark Wire Cable Reel Case
This case was designed for Amplio Systems to hold a Clark Wire CWR-528 cable reel. The case features a black painted interior with a 1/2" mounting board to attach the reel. The reel was installed by the LM Cases Custom Integration department.
Presonus 16.4.2 Roadcase
This case is designed for a Presonus 16.4.2 mixing console. The console is held in a 1" foam lined interior with a 4" accessory compartment behind the console for storage. The front foam is notched to allow easy access to the console's headphone jack. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and has 3 recessed handles.