Products
Shure UA870WB Wireless Paddle Antenna Case
This design accommodates 2 Shure UA870WB short wave antennas in a custom CNC cut foam insert. The case also features a 1RU rack to hold an antenna combiner. A hard mounted hinged flap is included to hold the antennas in their compartment and prevent them from contacting the rack bottom during transport. The foam insert and rack are mounted in a Pelican 1600 case.
D&B Audiotechnik T10 Loudspeaker Case
This case is designed with the audio visual rental market in mind. Without any modification, the case can accommodate the T10 speakers in a point source or flown array configuration. The speaker compartments are designed to accommodate the speakers with the Z5371 flying bracket attached should the user desire. The front accessory compartment is designed to accommodate the Z5370 flying frame. The accessory compartment features a hinged divider that splits the compartment top & bottom. In a point source configuration, the accessory compartment can hold spigots, stand adapters and cabling in 2 separate compartments. This split feature is handy in arrayed systems: one case can hold 2 speakers and the flying frame with the balance of the cases holding additional speakers and their cabling.
Saginaw Spirit Medical Equipment Trunk
This case was built for the Saginaw Spirit hockey team. The case is built from 3/8" plywood and features a removable latched front lid and a hinged top section. The top section of the lid features 24 plastic storage compartments for small items. The storage bins are held in place by a piece of black Comatex plastic latched into the lid section.
Mohegan Sun ATA Cymbal Vault
This case was built for the back line division of Mohegan Sun Casino. The case is built out of 3/8" plywood and is outfitted with Neon Green laminate. The case features a quick-lock mechanism to hold the cymbals down, this allows you to push a button and release the holder. This is much quicker than threading a typical nut over a threaded rod. The design of this case is special because it was made to protect all aspects of the cymbal. The threaded rod has a nylon sleeve over the bottom half so the threads will not dig into the cymbal hole resulting in "key-holing". We also cut circular pieces of black ozite carpet with thread holes in the center to prevent the cymbals from banging into each other during transport.
Roland JC120 ATA Case
This case was made for the back line division of Mohegan Sun casino. The case is a 3/8″ ATA series with a 2″ foam lined interior, 4″ casters, a silkscreen of the companies logo as well as a stencil to identify the contents of the case. The design also incorporates stacking caster wells in the lid of the case which not only help in the storage of multiple amp cases, it also allows the amp to be placed on the lid during a performance allowing it to be better heard by the guitarist.
Wireless First Mobile Production Work Station
This case was designed by Wireless First to be a mobile production workstation. The case is built out of 1/2" plywood, and features dual lids; the top lid is hinged and the front lid is removable.
Roland KC550 Flight Case For Mohegan Sun Casino
This case was made for the back line division of Mohegan Sun casino. The case is a 3/8″ ATA series with a 1″ Ester foam lined interior, 4″ casters, a silkscreen of the companies logo as well as a stencil to identify the contents of the case. The design also incorporates stacking caster wells in the lid of the case which not only help in the storage of multiple amp cases, it also allows the amp to be placed on the lid during a performance allowing it to be better heard by the guitarist.
Presonus 16.4.2. Road Case With Doghouse
This case combines the best pro features of larger console cases and integrates them into a smaller package. The case features a 1" foam lined interior with foam blocking around all critical components. The board is held in place by the custom doghouse that contours the back of the board along with a foam block that pins the board down at the arm rest. Pinning the console by holding the front and rear allows a space between the knobs and faders and the top foam of the case.
12RU Flat Panel Amplifier Rack w/Lid Storage
This amp rack was manufactured for PSAV. The rack features flat panel lids that are designed to store above the rack shell. The lids fit into custom tracks allowing them to slide in and out easily with out touching. The case features 12 spaces (RU) of rackable space that is shockmounted with 2" foam.
Custom Production Manager Road Box
This workbox is built out of 1/2" plywood laminated with Armortuf panels for Maryland Sound International. Armortuf is a ultra high impact composite panel made with woven fiberglass reinforcement and a specially formulated polyester resin. This laminate is most commonly found lining the walls of semi trailers! The combination of Armortuf laminate and 1/2" plywood creates a super strong case that is ready for the most demanding touring scenarios.
Vox AC30 Flight Case
This case was made for the back line division of Mohegan Sun casino. The case is a 3/8" ATA series with a 2" foam lined interior, 4" casters, a silkscreen of the companies logo as well as a stencil to identify the contents of the case. The design also incorporates stacking caster wells in the lid of the case which not only help in the storage of multiple amp cases, it also allows the amp to be placed on the lid during a performance allowing it to be better heard by the guitarist.
Gallien Krueguer MB150 Bass Amp Case
This case was made for the back line division of Mohegan Sun casino. The case is a 3/8" ATA series with a 1" foam lined interior that also features a silkscreen of the companies logo, as well as a stencil to identify its contents. They chose neon green as a laminate to help deter theft, it is much easier to spot a neon green case walking away during a chaotic load out over a case with traditional black laminate.
PRG Custom Surround With 12RU Insert
This rack was designed so the user has the option to remove the inner rack shell. This is very useful for rental companies, or other applications where gear is constantly changing. The removable shell design allows the user to interchange multiple inner shell configurations in one outer case, instead of changing the gear mounted in the rack.
Federal Signal Shock Mount Rack
When you are sick of your gear "blending" in into the abyss of plain black cases, give our neon green laminate a try! We guarantee that your cases will be noticed by the astronauts on the MIR Space Station!
Mario & Luigi Travel In Style!
Its easy to love your job when you get to deal with great people and fun products. Recently, Nintendo of America came to LM Cases with a unique problem: "how do we transport our Mario & Luigi costumes to trade shows with out damaging them".