Products
Custom Pelican 1600 “Rack In A Box”
Sometimes you just don't need a big heavy shock rack! For the situations when you only have 1 RU or 2 RU of gear and a few peripheral items LM Cases developed the "Rack In A Box". We start with a Pelican 1600 case and custom foam insert to hold a 1 RUrack shell. The rack shells are built from 1/2" Baltic Birch that is black painted and outfitted with front and rear rack rails. The rack shells are designed to rest on foam blocks in the Pelican case allowing for an open storage space under the rack shell. You also have the option to custom cut the interior to fit your specific application.
Univ. Of Louisville Helmet / Shoulder Pad Sideline Trunk
This case was built for the University Of Louisville. The case features aluminum rods used to hold 7 shoulder pads. The right side of the case has 9 black carpet lined compartments for general storage. The case features 3 drawers mounted on heavy duty Accuride drawer glides. The bottom 2 drawers are lined with black carpet, the top drawer features dividers and a clear Lexan lid.
Large Format Portable Server Rack
This case was built for John Hagee Ministries IT Department. The case is built out of 1/2" plywood and features a 1/2" shock mounted inner rack. The rack features a 40" deep shell as well as front and rear captive nut box rail to accommodate the deep server units.
HP Laserjet Printer Case
This custom printer case was built for the John Hagee Ministries IT department to safely transport four HP LaserJet printers. Each printer is housed in a 2” foam-lined compartment with a white HDPE floor for easy loading and removal. Constructed from ½” plywood with heavy-duty casters, recessed handles, and a pad-lockable hasp, the case is designed for secure, reliable use in mobile IT environments.
Nexo Geo S1230 Flight Case
This case was built for Austin TX based sound company Nomad Sound. The case is designed to hold 2 Nexo Geo S1230 speaker cabinets in the bottom section, and rigging accessories in the top compartment. The case features a custom CNC cut insert that contours the speaker cabinets to absorb shock and prevent movement. The CNC cut insert also allowed the case to be much smaller because a wood divider was not needed to separate the cabinets.
High End Systems Studio Spot 575 Case
This case was designed to carry 2 High End Systems Studio Spot 575 fixtures with the clamps attached. The case is built out of 3/8" plywood and features stacking caster wells in the lid, and 4" Colson casters.[/caption]
Foreigner’s Mick Jones Travels With LM Cases
This case was built for Mick Jones, guitarist for the band Foreigner. The case features a hanging section for clothes on hangers as well as 2 drawers and a lockable storage compartment for a wallet or other small valuables. Your not seeing double vision, the case also features a mirror in the lid! Thanks Mick!
Nintendo Of America Chooses LM Cases For “Burn Unit”
Recently LM Cases was commissioned by Nintendo of America to build a custom case to allow Nintendo designers to create custom game configurations on the road. The case features slots for 8 Wii game burners (there are only 8 desktop Wii game burners in existence!), a printer, laptop docking stations, and a 19" LCD monitor.
Shure UA870WB Wireless Paddle Antenna Case
This design accommodates 2 Shure UA870WB short wave antennas in a custom CNC cut foam insert. The case also features a 1RU rack to hold an antenna combiner. A hard mounted hinged flap is included to hold the antennas in their compartment and prevent them from contacting the rack bottom during transport. The foam insert and rack are mounted in a Pelican 1600 case.
D&B Audiotechnik T10 Loudspeaker Case
This case is designed with the audio visual rental market in mind. Without any modification, the case can accommodate the T10 speakers in a point source or flown array configuration. The speaker compartments are designed to accommodate the speakers with the Z5371 flying bracket attached should the user desire. The front accessory compartment is designed to accommodate the Z5370 flying frame. The accessory compartment features a hinged divider that splits the compartment top & bottom. In a point source configuration, the accessory compartment can hold spigots, stand adapters and cabling in 2 separate compartments. This split feature is handy in arrayed systems: one case can hold 2 speakers and the flying frame with the balance of the cases holding additional speakers and their cabling.
Saginaw Spirit Medical Equipment Trunk
This case was built for the Saginaw Spirit hockey team. The case is built from 3/8" plywood and features a removable latched front lid and a hinged top section. The top section of the lid features 24 plastic storage compartments for small items. The storage bins are held in place by a piece of black Comatex plastic latched into the lid section.
Mohegan Sun ATA Cymbal Vault
This case was built for the back line division of Mohegan Sun Casino. The case is built out of 3/8" plywood and is outfitted with Neon Green laminate. The case features a quick-lock mechanism to hold the cymbals down, this allows you to push a button and release the holder. This is much quicker than threading a typical nut over a threaded rod. The design of this case is special because it was made to protect all aspects of the cymbal. The threaded rod has a nylon sleeve over the bottom half so the threads will not dig into the cymbal hole resulting in "key-holing". We also cut circular pieces of black ozite carpet with thread holes in the center to prevent the cymbals from banging into each other during transport.
Roland JC120 ATA Case
This case was made for the back line division of Mohegan Sun casino. The case is a 3/8″ ATA series with a 2″ foam lined interior, 4″ casters, a silkscreen of the companies logo as well as a stencil to identify the contents of the case. The design also incorporates stacking caster wells in the lid of the case which not only help in the storage of multiple amp cases, it also allows the amp to be placed on the lid during a performance allowing it to be better heard by the guitarist.
Wireless First Mobile Production Work Station
This case was designed by Wireless First to be a mobile production workstation. The case is built out of 1/2" plywood, and features dual lids; the top lid is hinged and the front lid is removable.
Roland KC550 Flight Case For Mohegan Sun Casino
This case was made for the back line division of Mohegan Sun casino. The case is a 3/8″ ATA series with a 1″ Ester foam lined interior, 4″ casters, a silkscreen of the companies logo as well as a stencil to identify the contents of the case. The design also incorporates stacking caster wells in the lid of the case which not only help in the storage of multiple amp cases, it also allows the amp to be placed on the lid during a performance allowing it to be better heard by the guitarist.