Products
Pelican 0500 Soak Trunk
This case is designed for athletic equipment managers to pre-soak dirty laundry after games. The case is waterproof and fully gasketed allowing it to be filled with laundry and cleaning solution in the guest locker room, then loaded onto a truck with the laundry soaking. Cleaning solution can be easily drained by un-screwing the recessed drain plug on the side of the case. The case is equipped with 8" casters allowing it to be rolled onto the field.
Nintendo Wii U Burn Case
This case is part of a set designed for Nintendo to take to shows to work on software development; all electronics were installed and sold by the LM Cases Custom Integration (CI) department. The case is designed to be a mobile workstation that houses two computers and two specialized Wii U card writers. The computers share a monitor that is mounted in the case lid on a fully extendable rotating articulation mount allowing the monitor to be placed in any position needed for working. The case lid is supported by gas shocks to aid in the opening and closing process.
Deluxe Coaches Trunk
The 2013 Deluxe Coaches Trunk is designed for teams that have to dress 30 coaches. Each Deluxe Coaches Trunk features 15 cubbies (2 trunks for 30 coaches) and a hanging clothes section. The interior of the case is treated with our proprietary black texture coating for easy cleaning. The cubbie compartments are built out of 1/2" black plastic for an extremely strong and easy to clean individualized storage section.
Athletic Trainers Medical Kit
This case was designed for athletic trainers to be used in the sitting position. The top of the case features a small removable plastic bin with a removable 24 capacity tape caddy as well as 6 divided compartments for small items like medical supplies. The bottom of the case is accessed by a removable front lid that is magnetically stored on the back of the case and holds 4 removable plastic bins.
2013 Signature Amenities Case
The 2013 Signature Amenities Case is designed to be the ultimate mobile mini kitchen unit. We took the design of the 2012 model and updated a few key features, the hot dog maker was replaced with a small George Foreman grill allowing greater options for mobile food prep. We also added more texture coated surfaces and removed foam for easier clean up.
Sideline Drawer Trunk
This trunk is designed to be portable work station that sits on the sideline during games. The trunk features a black Formica work surface which is great for repairing equipment like helmets and shoulder pads. Above the work surface are 6 Tilt Lock bins mounted in the case lid that hold small parts like screws, chin straps and washers. Mounted below the work surface are 3 heavy duty drawers mounted on Accuride drawer glides. All drawers feature our black texture coating, the top two drawers are empty; the bottom drawer features a removable plastic bin that can be outfitted with a 120 capacity tape caddy.
Mini Core Trunks
The LM Cases Mini Core Trunks were designed to be an excellent lightweight companion to our standard Core Trunk. (CLICK HERE for more info on the Core Trunk) The Mini Core Trunks have exterior dimensions of 22" wide by 22" deep and 18.5" tall and weigh 32lbs. The trunks are built out of a lightweight 3/8" honeycomb plasic and feature recessed lid stay's, 4 deep recessed handles, a black carpet lined interior, and stacking cups and feet. The trunks are designed to stack on each other and the regular Core Trunk (when equipped with the stacking option).
University Of Colorado Chooses LM Cases For The Deluxe Amenities Trunk
This Deluxe Amenities Trunk was designed for the University Of Colorado. The case features custom compartments that come complete with a refrigerator, microwave, Keurig beverage maker and Bose Sound Dock. The appliances and installation were handled by our in house Custom Integration department.
48 Capacity Shoe Trunk
This trunk is designed to hold 48 pairs of shoes for mobile sports teams. The trunk is built with easy cleaning in mind, to accomplish this we removed all organic and soft materials that can hold moisture and odor. The exterior is built from our 3/8" proprietary composite panels; these panels are water resistant and can get wet with out rotting. The composite panels are also 30% lighter that traditional plywood. The trunks caster pad is built out of 1/4" aluminum, the divider network is made out of 1/2" black plastic. To clean the trunk, simply lay it on its back and hose it out, water flows out of the 8 recessed vent dishes located on the back of the trunk.
Apple Mac Pro ATA Workstation Case
This case was designed and built for Swank Audio Visual. The case features a custom compartment for a MacPro tower, pull out keyboard shelf, drawer and custom patch panel built by our Custom Integration department. Swank wanted to have the ability to leave the case closed and locked at show sites, to accomplish this our Custom Integration department designed a custom patch panel that made all of the inputs and outputs of the MacPro tower accessible while the case lids were on. The panel includes, 2 cat5's, 3 Displayport's, 3.5mm audio ports, 2 Firewire 800 ports, 3 USB's and a Powercon connector. The CI department also mounted fans on the back lid to take care of ventilation.
12RU Pocket Door Amp Rack
This case was designed for Oxygen Lightworks for D&B D12 amplifiers. The case features pocket style doors that are designed to open and fold back into the sides of the case on heavy duty glides. Pocket Door racks save time during set up and provide an excellent solution to the age old problem of what to do with your case lids. The inner rack shell is fully shock mounted and is 24" deep rail to rail to accommodate the amplifiers as well as power distro units. The exterior dimensions are 24" x 30" to fit into standard truck pack configurations. The case is built out of 1/2" plywood and features 4" Colson casters, deep recessed handles and stacking caster wells.
RED Rack: Noise Reducing Production Rack
The LM Cases RED Rack is designed to be the pinnacle portable noise reduction chamber for your studio equipment. With over 2 years of testing and development we are proud to share our RED Rack with you!
Waterproof Half Width Rack Case
This case is designed to hold half width rack mounted components like wireless microphones, recording interfaces and processors. The rack portion of the case is built out of 1/2" baltic birch plywood and features front & rear rack rail. The rack is finished with our black textured coating. The exterior case is a Pelican 1560 with a custom CNC cut foam interior. The case is completly waterproof and features a retractable handle and wheels.
Custom Rifle Case
This rifle case features a custom CNC foam cut insert designed to contour the gun. The insert also features 2 accessory compartments and a Pick N' Pluck foam section for the user to add components at a later time. The exterior case is built out of 1/4" plywood laminated with olive drab green ABS plastic and features surface mounted hardware.
Sony PDW 700 Camera & HDVF-EL Viewfinder Cases
These cases were designed for the University Of Florida's WUFT TV. The cases feature custom cut CNC foam inserts to store the individual components that make up each equipment set. Each of the cases are built from 3/8" plywood laminated with blue ABS plastic and silk screened with the orange Gators logo.