LM Case
Heavy Duty Feeder Cable Trunk “Sammy Size”
This trunk is designed to be the backbone of your show, pack your heaviest cables inside and stack gear on top; this trunk is designed to take any abuse you can throw at it. The trunk is built out of 3/4” Baltic Birch that is glued, stapled and screwed together. The case sides feature interior wood cleats for additional strength and the case lid features 3/4” Birch alignment strips to keep the case square even under extreme load. The case features a removable 3/4” Baltic Birch divider that splits the interior in two equal compartments. To add rigidity, the case employs a 1.5” thick bottom and 4” x 2” Colson Encore casters. All hardware is double recessed into the exterior to provide as flat of an exterior surface as possible. The case exterior is finished in black texture coating and features black powder coated hardware to help the case blend in backstage environments.
38 Capacity Mic Stand Case
This case was designed for Forty Two Inc. The case is designed to hold 20 tall mic stands, 18 low profile stands and accessories. The case features a 3/8" marine grade plastic divider network to accommodate either straight or boom stands, the case also features a 3/8" plywood accessory box designed to round stand bases.
University of Arkansas Sideline Workbench
This case was built for the University of Arkansas. The case is designed to hold all the parts needed to repair any of the players equipment that may break during a game. The interior features 6 - 1/2" Baltic birch drawers mounted on HD Accuride drawer glides, 24 plastic bins to hold small items, a cordless drill and battery charger, and a black formica work surface.
Bowling Green Helmet/Shoulder Pad Sideline Trunk
This case was designed for Bowling Green University. The case is designed 7 pairs of back up shoulder pads and 10 back up helmets in case any of the players gear breaks during the game. The interior also features 2 drawers with dividers for misc. parts storage, and a Lexan door over the helmet compartment.
Avid Digidesign Venue Profile ATA Case
This case was designed for the Audio Visual Professional Group. The case is a 3 piece console case with a removable top and front lid. The removable top lid features 2 foam lined compartments for up to 19" widescreen monitors, there are also 2 slide out keyboard trays under the console.
Gretsch Catalina Jazz Drum Cases
These cases were designed to individually fit the Gretsch Catalina Jazz kit. Each drum case is built out of 1/4" plywood and lined with 1/2" foam to keep the cases as light and small as possible. The cases also feature flat triangle corners so they can stack when loaded and nest inside each other when they are empty.
East Carolina Laundry Trunk v2
This case was designed for East Carolina University. The case is based on our standard deluxe laundry configuration with the addition of 4 plastic lined compartments in the left section of the case, and one additional compartment on the right side. The allows for better segregation of clean and dirty clothes when the team is on the road. All compartments are lined with HDPE plastic so they are easily cleaned. Each side of the case also features a 1/4" Lexan door, and trap doors to load the laundry compartments with dirty clothes while the case is closed.
University Of Arkansas Laundry Trunk
This case was designed for the University Of Arkansas. The case is built out of our proprietary 3/8" composite panels laminated with black fiberglass laminate. The interior of the case is lined with HDPE plastic to allow it to be easily wiped clean. Because the case is built out of our composite panels and not traditional plywood, the case can get wet and not get moldy or rot.
Mohegan Sun Third Pack Cable Trunk w/Custom Foam Logo
This trunk was designed for Mohegan Sun Casino. The case has exterior dimensions of 30" x 30" x 24" to allow it to be packed 3 wide in any configuration in a 90" truck. The interior of the case features custom inlaid foam that had the Mohegan Sun logo as well as "Video" for the video department at the casino.
Custom ASI Graphics Panel Sales Sample Case
This case was built for Architectural Systems Incorporated. The case is designed to hold sample boards of ASI's products. The exterior of the case is built out of lightweight 1/4" plywood and features a telescoping aluminum handle and inboard dolly casters. The exterior also features a custom full color graphics panel of the customers logo printed on ABS plastic. The interior of the case is lined with crosslink foam, which is a class A surface to prevent any abrasion marks that standard foam may leave.
Missouri Southern State University Athletic Trainer Medical Workbox
This case was designed for Missouri Southern State University. The case holds all the necessary medical items used for treating injured players. This case is designed to fit in a standard sized bus bay, to make the loading & unloading process easier the case is outfitted with white UHMW plastic runners and handles mounted in the caster pad allowing the case to be handled easily in any direction and keep the wear on the case to a minimum.
Steelcase Walkstation Trade Show Case
This case was designed for Steelcase Inc. The case is designed to hold the companies Walkstation unit for their trade show exhibit. The interior features a large storage compartment with a 1/2" Comatex plastic bottom to allow easy loading and unloading of the treadmill. The table legs are mounted on the left side of the case, one set of legs hangs on plywood with HDPE plastic runners to allow the piece to slide easily. The small components are held in custom inserts that were built out of laminated PE foam and cut on our CNC fast wire saw. The case lid features a custom instruction board to show which components go in each compartment. The case has 2 separate sides, the front side holds the individual parts, the rear side allows access to the treadmill to aid in its removal and shelfs for the storage of miscellaneous items.
Nexo 45 n-12 Monitor Case
This case was designed for Nomad Sound. The case is designed to hold 2 Nexo 45 n12 monitors on their sides to achieve an exterior truck pack dimension of 30" x 24". The wedges are held in a custom CNC cut insert to hold the unique angle of the cabinets. The angled pieces of foam were cut on our fast wire CNC saw and the outlines of the cabinets were cut on our reciprocating knife CNC saw.
Nintendo Mac Pro Workstation
This case was built for Nintendo Of America. The case is designed to hold a Mac Pro tower and peripherals. There is a pull out shelf mounted on HD Accuride glides for a keyboard/laptop as well as two divided compartments for additional storage.
Avid SC48 Flight Case
This case was built for Maryland Sound International. The case is designed to hold the SC48 in on a foam shock mounted structure that is built to make the doghouse and keyboard tray a single unit. The case also features an accessory compartment as well as a built in mouse pad to the right of the console.