Rack Mount Panel
Custom Speakon/RF Output Panel
This panel was designed for Briarcrest Christian School to provide a central location for their amplifier and RF antennae outputs. The panel features 2 NL4 outputs allowing the left and right speakers to be run down a single cable run. Each connector is labeled using simple terms allowing students to use the panel without confusion. The Speakon connectors are also labeled with the pin out to help with troubleshooting. Dual XLR’s are provided for a record feed. BNC’s are provided to send signal to the separate antennae needed for microphones and IEM’s. Two Cat5 jacks are spec’d for network input/output.
Sony RCP1500 Sliding Rack Mount Fly Pack Shelf
This sliding shelf is designed to hold 3 Sony RCP1500 camera controllers in a rack mount format. The shelf features a multi-position locking latch system that allows the shelf to be extended and locked into 14 positions of extension by pulling the front T handle. The shelf also features a padded palm rest at the front below the controllers. The shelf requires mounting to the front and rear rack rails of a rack case. The minimum rail to rail depth is 20”.
2RU Mobile Entertainment Center Control Rack Panel
This 2RU rack mount panel was designed to be the control center of a mobile entertainment system. The panel is built from .125” thick black anodized aluminum with all labels being laser etched. Featured are a Siemens 30mm push button and indicator light. The push button initiates the power sequencer to power up/down all the components of the case. The indicator light is the last element in the power chain; once the sequence has completed the light illuminates. Also featured is a waterproof HD up/down switch that controls an electric lift that a monitor is mounted on. Centered in the panel is a Leviton courtesy outlet that features Edison outlets and 2 USB outlets. 5 USB outlets are provided for device charging. Male XLR jacks are provides for a main output of the system to an additional set of speakers. Input signals are handled through Datapro brand panel mount HDMI, 3.5mm audio jack and a USB 3.0 jack. All Datapro input jacks feature recessed milling on the rear of the panel.
Power Input / Ethernet 2RU Rack Panel
This panel was built for the University Of Nebraska as a power and signal input for a portable server rack. The panel features a Neutrik Powercon input wired directly to a Hubbell duplex outlet enclosed in a back box. The panel also features a Neutrik NE8FDP-B ethernet jack to provide a WAN input. The panel is built out of .125" thick brushed aluminum that black anodized and features white laser etched labels and the Nebraska "N" logo.