Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 25-0189
Tam Tam Transport Case
This custom case built by LM Cases is designed to hold an orchestral tam tam. The design includes a welded aluminum 4” x 2” tube frame to hold the instrument.
The case features a split lid which LM refers to as a G style. The lids can be operated independently allowing the case to be used by one person. The lids can also remain latched together and used like a traditional pull over style. Each lid features custom foam blocking to support the tam tam frame and prevent the tam tam from swinging while in transport. The case tray is black carpet lined.
The tam tam is suspended from a custom welded aluminum frame. The frame is built from 4” x 2” aluminum tubing that is mitered and welded at each side. The frame is mounted to the case tray and features aluminum angle support pieces for additional support. The tam tam is intended to remain attached to the frame and played while in the case. The case tray doubles as a cart to move the instrument around a facility.
The exterior case is built from 3/8” plywood laminated with black ABS plywood. The hardware set includes 6 deep recessed handles and 8 latches. The case rides on 4” Colson locking casters mounted via a ¾” plywood caster board. A “US Army Field Band” stencil is provided on the front & back of the case.
Special thanks to the US Army Field Band!
Case Specifications:
Max OD Including Corners & Casters: 48” Wide x 22.5” Deep x 55.625” Tall
Weight: 196lbs
- REFERENCE: 25-0189
- CATEGORY: Other Industries
Related Products
Transport Case For 10 Humes & Berg Everglow 330 Jazz Ensemble Music Stands
This custom case designed by LM Cases is intended to hold 10 Humes & Berg Everglow 330 jazz ensemble music stands. The case features removable ½” marine grade plastic dividers that separate each stand within the case. Each compartment features usable dimensions of 44.75” wide x 23.75” tall x 2.375” deep. 2 removable carpet lined accessory trays are provided for miscellaneous items. Each tray features usable interior dimensions of 26.25” wide x 22.125” deep x 6” tall.
All In One Percussion Large Format Transport Case
This custom case designed by LM Cases is intended to hold a percussion setup. The case holds all the items needed for a complete percussion rig in one large format case.
Dr. Z Z80 2x12 Cabinet Road Case
This custom case built by LM Cases for the Steve Miller Band and designed for the Dr. Z Z80 2x12 speaker cabinet. The case features a pull over lid with the cabinet living in the case’s tray. The interior is lined with 1” PE foam with 2” PE foam under the cabinet. The 2” bottom foam block features cut outs in the corners allowing the rubber feet to “float”.
Piggyback Alto & Tenor Sax Cases For Mark Rivera
These cases were built to hold an alto saxophone and tenor saxophone for Mark Rivera. Each outer road case is designed to hold a molded case for each sax.
Compact Guitar Tech Case For Fly Dates
This case is designed for the touring guitar tech who needs a smaller workbox for fly dates and smaller venues. The case features a ½” black marine grade plastic deck piece. The deck includes 2 fold outs designed to expand the work surface and hold the guitar in place by its body and neck. Each of the fold outs are mounted via position control hinges. These hinges perform in the same way as a laptop screen allowing the fold outs to be mounted at any angle along a 90-degree plane. The neck support features rubber bushings arranged in a “V” to allow the gripping of any neck shape. The body support features a piece of purple crushed velvet foam and a “V” shaped piece of ½” marine grade plastic to lock the guitar in place via the strap button.
Dr. Z Z80 Guitar Amp Head Road Case
This custom flight case is designed for Steve Miller for the Dr. Z Z80 amp head. The case interior is lined with 1” PE foam. A 14” wide x 7” deep x 1” tall accessory compartment is located under the amplifier for storage.
Amplified Nation OverDrive Reverb Guitar Amp Case
This custom case was built for Lake Baum for his Amplified Nation Overdrive Reverb amplifier and 1x12 cabinet. The custom case lid configuration allows it to operate as a “live in” or a “pull over”.
Dr. Z X-Ray Combo Amp Road Case
This custom case is designed for the Steve Miller for his Dr Z X-Ray Combo guitar amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Orange OBC410 Bass Cabinet Case
The custom case is designed for the Orange OBC410 bass cabinet. The cabinet is held in a 1” PE foam lined interior. 2” PE foam is used underneath the cabinet for additional support. The lid pulls over the speaker cabinet allowing it to live in the case tray during a performance.
Orange AD200B Bass Amplifier Case
This case is designed for the Orange AD200B bass amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp head. The lid is removable with the amp living in the case tray. The lid features 3 deep recessed handles and 4 large, recessed latches. The case is built from 3/8” plywood laminated with your choice of ABS plastic colors.
Custom Vox AC30S1 Road Case
This custom case is designed for the Vox AC30S1. The amplifier is held in place by custom CNC cut PE foam. The amp is surrounded by 1” foam on the top and sides with 2” PE foam underneath. The bottom foam insert allows the rubber feet on the amp to float with the bottom cabinet being fully supported. A 14” wide x 8” deep x 2” tall accessory compartment is provided under the amp for additional storage.
Sequential Prophet 10 Analog Synth Road Case
This custom road case is designed for the Sequential Prophet 10 analog poly synth. The keyboard is held in a custom 1” PE foam lined compartment. A 3.5” Ester foam block is mounted in the lid to softly touch the keys and hold the synth in place during transport. A carpet lined accessory compartment is provided for additional storage.
Custom Road Case For Gibson SG Guitar
This custom flight case is designed to fit a Gibson SG electric guitar. The case is constructed from our XL Series aluminum. This aluminum features tongue and groove built into the extruded shape for a very tight, and secure seal between the lid and the tray. The case interior is custom cut from Ester foam and contours the shape of the guitar body. Crucial stress points of the guitar are supported with additional foam blocks. All interior foam is wrapped with purple crushed velvet. A custom accessory compartment with a hinged door is provided for additional storage.
Benson Monarch Reverb 1x12 Amp Road Case
This custom case is designed for the Benson Monarch Reverb guitar amplifier. The case interior is lined with 1” PE foam, with 3” PE foam under the amp. A 2.5” accessory compartment is located underneath the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Roland DJ707M USB Controller Road Case
This case is designed for the Roland DJ-707M Serato DJ Controller. The case features a pull over lid allowing the controller to remain the case tray during a performance. An accessory compartment is provided under the controller for the power cable and other misc items. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case hardware includes 2 recessed latches, a slim line recessed handle, and medium ball corners.
Korg Minilogue Synth Road Case
This transport case is designed to hold the Korg Minilogue synthesizer. The case features a custom CNC cut, PE foam interior. The synth is supported from the bottom by custom angled foam blocks that grab the unit by the sides. Angled foam blocks are also included in the lid to hold the synth down during transport. A compartment is provided under the synth for its power supply.
Novation Bass Station II Synth Road Case
This case is designed to hold the Novation Bass Station II analog synthesizer. The case interior is lined with 1” PE foam. A 8” wide x 6” deep x 1” tall accessory compartment is located under the synth for storage. 1 surface mounted handle is provided allowing the case to be easily handled by the top and the sides. The case is built from ¼” plywood laminated with your choice of ABS colors. The plywood panels are wrapped with our XL Series extrusion with integrated tongue and groove for a light weight, and durable exterior.
Moog Subsequent 25 Analog Synthesizer Road Case
This case is designed to hold the Moog Subsequent 25 analog synthesizer. The case interior is lined with 1” PE foam. A 8” wide x 6” deep x 1” tall accessory compartment is located under the synth for storage. 3 recessed handles are provided allowing the case to be easily handled by the top and the sides. The case is built from ¼” plywood laminated with your choice of ABS colors.
16” x 16” Floor Tom Drum Road Case
This case is designed to hold a 16” floor tom drum. The case interior is lined with ½” PE Foam. A 1/4" marine grade plastic divider is provided to create a separate compartment for the floor tom legs. The case exterior is built from ¼” plywood laminated with light blue ABS plastic. The case features 3 recessed handles and flat triangle corners.
14” x 14” Floor Tom Drum Road Case
This case is designed to hold a 14” floor tom drum. The case interior is lined with ½” PE Foam. A 1/4" marine grade plastic divider is provided to create a separate compartment for the floor tom legs. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case features 3 recessed handles and flat triangle corners.