In-house Engineering

Custom Integration Expertise

Exceptional Service

Products

custom-road-case-for-barco-tld-90-degree-lens-4-1.jpg

Barco TLD .4:1 90 Degree Lens Flight Case

This case is designed for the Barco TLD .4:1 90-degree projector lens. The lens is held in custom CNC cut crosslink foam cradles. The lens is supported at all stress points. The nonabrasive foam prevents scratching and allows the lens to be transported without its lens caps attached. 

REF# 22-0460
custom-locker-room-supply-trunk.jpg

Locker Room Supply Trunk

This locker room supply trunk is designed to be a convenient storage solution and workstation for a variety of applications. The truck can easily be used for equipment managers and athletic trainers alike. 

REF# 22-0674
24-channel-mic-splitter-rack-lm-cases.jpg

24ch IEM Rack w/Mic Split Panel

Custom 24-channel in-ear monitor rack with integrated microphone split, Behringer XR18 digital mixer, Shure PSM300 wireless IEM system, dedicated networking, and locking power distribution. Built in an LM Cases 8RU rack, the system features 24 channels of XLR input/output splitting, permanently wired mixer tails, front-accessible network connections, custom cabling, labeling, and complete LM system integration for fast, repeatable live deployment.

REF# 22-0888
touring-covid-testing-package-flight-case.jpg

50 Capacity Covid Testing Kit Package For Touring Crews

This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required. 

REF# 22-0021
fly-rack-for-deep-equipment-pelican-1630-case.jpg

4 Space Fly Rack For Deep Equipment

This 4RU portable flypack is designed with deeper rack equipment in mind. The removable rack shell is built from ½” Baltic Birch plywood. The rack is finished with black textured coating and features 2 deep recessed black handles and large rubber feet. Pre-tapped, 10/32” rack rail is provided at the front & rear positions. 2 rail recess options are provided at ½” and 1”. These recess options allow you to have rail-to-rail depths of 18”, 17.5” and 16”. A custom CNC cut PE foam insert protects the rack with 2” foam at all points. 2” are left open at the front and rear of the rack for any cables or protruding equipment. An accessory compartment is provided under the rack shell for storage. 

REF# 17-0936
custom-carrying-case-for-at4047-microphone-stereo-pair.jpg

Audio Technica 4047/SV Stereo Pair Microphone Case

This heavy-duty carrying case is designed for two Audio Technica 4047/SV large diaphragm condenser microphones. The case features a custom cut, PE foam insert that contours the shapes of the microphones and shock mount baskets. The foam insert is designed to hold 2 AT 4047/SV mics, 2 AT 8449a/SV shock mounts and a generic compartment for a K&M stereo bar. 

REF# 22-0883
6_drawer-production-workbox.jpg

6 Drawer Video Workbox

This video tech workbox was built for Kelson Productions in NYC. The custom built workbox features 6 heavy duty drawers, 3 of which have configurable dividers. 

REF# 21-0669
truck-pack-workbox-fast-pack.jpg

5 Drawer Workbox w/270 Degree Fold Flat Front Hinged Lid

This custom 5 drawer workbox was built for IKO Productions. The case features an OD of 24” x 30” with a 270 degree fold flat front door. 

REF# 21-0490
6-drawer-window-trunk-wvu-football.jpg

6 Drawer Sideline Window Trunk

This 6-drawer sideline window drawer trunk was designed for West Virginia Football. The trunk features 6 equally sized drawers with interior dimensions of 10.875” wide x 22” deep x 12” tall. Each drawer is built from ½” Baltic Birch plywood, finished with black texture coating and mounted on HD Accuride glides. 

REF# 22-0401
custom-nutrition-trunk.jpg

Large Format Sports Nutrition Trunk For West Virginia Football

This large format trunk was designed for the West Virginia Football Sports Nutrition Dept. The trunk is designed to dispense common foods like fruits and bars. The trunk features a 45qt Yeti cooler, removable table that secures to the trunk and a custom power distribution unit that features a combination of AC and USB A outlets. 

REF# 22-0423
recriuting-trunk-for-college-football-gloves.jpg

Custom Recruiting Trunk w/Removable Trays For Socks & Gloves

Custom football recruiting trunk built for West Virginia University, featuring two removable four-compartment apparel trays with clear Lexan lids and exterior mounting brackets. A large lower storage compartment provides additional capacity for recruiting supplies, while heavy-duty construction, 6" casters, and custom team graphics create a portable equipment storage and display solution.

REF# 22-0400
custom-tour-case-for-yamaha-cl3.jpg

Yamaha CL3 Mixing Console Case

This custom road case is designed for the Yamaha CL3 console. The console is protected by 2” foam blocks at all key stress points. Custom Crosslink foam pieces are located in the nose lid that contour the shape of the console’s palm rest. A custom doghouse covers the I/O section of the console. The doghouse is built from ¾” Baltic Birch plywood and is finished with black texture coating. The lid features double hinges allowing it to swing fully back for full access to all connections. 

REF# 18-0909
athletic-trainers-lower-upper-extremity-trunk.jpg

Buffalo Bills Upper/Lower Extremities Athletic Trainers Trunk

This athletic trainer's trunk was designed for the Buffalo Bills. The trunk features 4 equally sized drawers with 2 removable ¼” marine grade plastic dividers per drawer. Each drawer features a magnet at the back that secures it to the case wall when not in use. This helps to keep drawers closed when the trunk is moved around with the lid open. Each drawer is built from ½” Baltic birch as is finished with black textured coating. The drawers are mounted on HD Accuride glides. The trunk’s front lid features a bottom divider for bottle storage. 

REF# 21-0750
roadcase-for-chamsys-magicq-mq70-console.jpg

Chamsys MagicQ MQ 70 Compact Console Case

Custom protective case designed for the ChamSys MagicQ MQ70 lighting console, featuring a CNC-cut foam interior, kickstand relief, integrated accessory storage, and LM Cases XL Series aluminum construction. Compact and lightweight with twist latches and a recessed spring-loaded handle for easy transport.

REF# 20-0628
custom-skb-case-for-panasonic-et-d75le10-lens.jpg

Panasonic ET-D75LE10 Projector Lens Case

This custom SKB iSeries case is designed to hold the Panasonic ET-D75LE10 projector lens. The case features a custom CNC cut foam insert built from crosslink foam. Crosslink foam is nonabrasive, allowing the lens to be transported without its caps attached.

REF# 22-0850