Products
Columbia University Sideline Workbox
This trunk was designed for Columbia University. The trunk is designed to live on the sideline during each game to provide quick and easy access to gear. The trunk features 6 drawers mounted on HD Accuride gildes, each drawer is divided into compartments to provide better organization. The top left drawer is designed for small items and features 25 compartments with a Lexan lid.
University Of Arkansas Nutrition Trunk
This trunk was designed for the Univerity Of Arkansas to be a mobile food storage and prep unit. The trunk features a refrigerator as well as a 35qt Pelican cooler for keeping beverages and food cold during transport. The Pelican cooler is designed to be removed allowing it to be loaded with fresh fruit at the hotel and transported to the stadium with out the need to take the whole trunk. The Pelican cooler is extremely durable and features a lifetime warranty and 7-10 days of ice retention! The trunk also features 2 removable anti microbial UHMW plastic cutting boards for food prep and a drawer for additional storage.
Northwestern Chooses LM Cases For Sideline Trunk
This trunk was built for Northwestern University. It is designed with with 3 sets of Tilt Lock bins and a Rigid cordless drill mounted in the case lid. The work surface is laminated with black Formica and features a 6 outlet power strip that terminates into a recessed plug on the exterior of the case. The plug can accept any standard extension cord, all electronics were provided and installed by our in house Custom Integration department. The case interior features 8 drawers with custom dividers mounted on HD Accuride drawer glides. All interior surfaces and drawers are black texture coated.
Roland V-800HD Switcher Case
This case was designed for a Roland V-800HD switcher as a mobile workstation that can be quickly set up. The case holds the switcher in a custom rack mount compartment and features a pre drilled VESA pattern in the lid for mounting a monitor. The switcher compartment not only securly holds the unit, it also has a trap door to allow cables to be hidden for a sleek finished look. The exterior case is built out of 3/8" plywood.
National Symphony Wardrobe Case
This case was built for the National Symphony Orchestra. The case features 4 hanging clothes compartments and 8 - 3/4" Baltic Birch laquered drawers. The case is built out of 1/2" plywood and features 4" Colson casters.
1930 National Lap Steel Case
This case was designed for a 1930 National Lap Steel guitar. The case features a custom CNC cut foam interior that contours the shape of the lap steel covered with black crushed velvet. The exterior case is built from our XL series light weight aluminum.
Evertz Microsystems Custom Rack
This case was designed for Evertz Microsystems. The case is designed to hold a custom 40 space unit that weighs 800lbs! The unit needs to travel to different venues and be set up. To accommodate this, heavy duty Colson 4" x 2" casters were used on the rear lid to allow the case to be shipped, and fit through a standard door. The case and unit are extremely heavy; the case is designed to be mechanically lifted by the inner rack shell. In case a forklift or crane are not available, 28 deep recessed handles were used to allow the case to be manually lifted.
Test Identifier Case
This case was designed to hold a Biological Identifier Kit. The case features custom CNC cut foam inserts for each of the delicate components. The interior case features a 3/8" removable tray with a generic storage area mounted below. The exterior case is built out of 3/8" plywood and featured deep recessed handles & 3 field replacable inboard dolly casters.
HEPA Filter Case
This case was designed for a HEPA filter & hook up accessories. The components are held in a custom CNC cut foam insert that is custom cut to form fit each item. The exterior case is built out of 3/8" plywood and featured deep recessed handles.
Discount Dance Supply Wardrobe Case
This case was built for Discount Dance Supply to be used at trade shows as well as performances. The case is part of a system of cases that connect to each other providing hanging bars between cases. The interior features gray texture coating and hanging clothes bars for storage. Each section has LED lights for use when backstage, the separate sections also feature black carpet covered hinged flaps that secure to the top of the case as a spot to Velco banners and signs to. Each section also features a large drawer mounted on HD Accuride glides and finished with black and gray texture coating.
PennCare Portable Emergency Medical Station
This case was designed and built for PennCare as a "point of medical care" for EMS responders first on scene. The case is designed to hold medical supplies in a heavy duty portable format allowing the case to be used in the field for disaster response or in hospitals during increased surges in patients. The case features 3 drawers made out of 1/2" Baltic Birch plywood that are finished with wipeable black texture coating. The case features a white Formica work surface with 6 Tilt Lock bins mounted in the case lid. The removable font lid features table legs that allow the lid to be quickly converted into a table for an additional work surface.
Roland V-Piano ATA Case
This case is designed for the Roland V-Piano. The case is built out of 3/8" plywood and features a 2" foam lined interior. The case features 3 handles and field replaceable 3" inboard dolly casters.
Epson Document Camera & Projector Case - Pelican 1620
This case was designed to hold a Epson document camera and projector. The design is based around a Pelican 1620 case and features a custom CNC cut foam insert to hold the document camera, projector and accessories.
Canon XF305 Camera Case - Pelican 1620
This case was built for Graybow Communications. The design is based around a Pelican 1620 case that features a custom cut foam insert for the camera and 2 compartments for support components.
Eaton Electrical Switch Pelican 1690 Case
This case was built for the Eaton Electric Corp as a salesman sample case. The design is based around a Pelican 1690 case and features a CNC cut foam insert for the switch. The insert holds the switch with the lever facing down to make it easier to remove from the case. The insert accomodates the power handle in the up or down position.