Products
Carlson Audio Mobile Pro Tools Recording Flypack
This case was designed for Carlson Audio Systems as a portable recording fly pack. The case features a 27" Apple Cinema Display monitor mounted on an articulating mount on a position control board. The case also features storage for 2 Yamaha HS10 monitors, Apple MacPro tower and a 10 space shock mounted rack section.
Advanced Defense Solutions Metal Testing Workstation
This case was built for Advanced Defense Solutions to provide a portable workstation for their factory floor for metal testing. Metal quality control is done by a scanner mounted on a movable gantry, this gantry scanner is hardwired to a rack mounted control unit. The gantry scanner is held in a CNC cut foam insert in a removable drawer; the drawer is mounted on the right half of the case. The top of the drawer is open, allowing the cable to coil and store above the drawer on hooks. A 20RU shockmounted rack is mounted on the left half of the case providing adequate storage for all processors needed to run the scanner. The rack features recessed spring loaded D-Ring shackles which allow multiple points to tether the umbilical cord that runs the gantry scanner, the rack also features recessed fans to provide additional cooling. The rack, drawer and cable storage is built into a single frame to isolate it from the exterior case and provide shock protection.
The top of the case features a 19" ELO touch monitor mounted on a position control hinge board and telescoping monitor mount. The position control hinge board allows the monitor to be tilted at any angle ranging from 90 - 180 degrees. The telescoping monitor mount features a rotating VESA mount allowing the monitor to be orientated in portrait or landscape views in addition to letting the monitor swing to the left or the right. To the right of the monitor, is a black Formica laminated writing surface. The case also features a retractable 30' cable reel eliminating the need for an extension cord to power the case.
World Wrestling Network Portable View Station
This project was designed for the World Wrestling Network as a portable monitoring station for Vince McMahon. The system was designed, built, and installed by the LM Cases Custom Integration department. The system consists of the inner portable view station which designed to blend into corporate environments and its outer case that protects it on the road.
Production Glue Medium Format Modular Workbox
This case was deigned to be part of a 2 case size modular workbox system for Production Glue. The system consists of a large format case (CLICK HERE for more info on the large format case), and a medium sized case that hold 3 and 4 drawer interchangeable stacking drawer units (CLICK HERE for more info on the drawer units). Production Glue offers its services to many diverse clients in different industries at a variety of locations ranging from outdoor sites to small conference centers. This presented a unique challenge to LM to create a case that was practical and large enough to carry all of the items needed, yet understated to blend in to the background at high profile events.
Production Glue Large Format Production Workbox
This case was designed for Production Glue to be a modular production workbox. The case is designed around 3 & 4 drawer interlocking units, more info on the drawer units can be found by clicking this link: CLICK HERE. Production Glue offers its services to many diverse clients in different industries at a variety of locations ranging from outdoor sites to small conference centers. This presented a unique challenge to LM to create a case that was practical and large enough to carry all of the items needed, yet understated to blend in to the background at high profile events.
Production Glue Modular Interlocking Drawer Units
These drawer units were designed for Production Glue to be used as modular inserts for mobile production workboxes. The drawer units are designed to stack with each other for easy storage when outside of their exterior cases.
Sally Beauty Ion Brilliance Trade Show Workbox
This workbox was designed for Sally Beauty Supply to be used as a display case for their Ion Brilliance products at trade shows. The case features 6 utility drawers for storage: each drawer is built out of 1/2" Baltic Birch plywood and is individually lockable with a key. The drawers are mounted on heavy duty Accuride drawer glides and are mounted inside of a frame that isolates the drawers from the exterior case. The left half of the case features 2 hanging bars for samples.
University Of Kentucky Hospitality Trunk
This custom amenities trunk is a self-contained mobile hospitality case integrating a refrigerator, microwave, Keurig beverage maker, electric grill, and three heavy-duty storage drawers into one tour-ready unit. Built from 3/8" ATA-rated plywood with ABS laminate, recessed hardware, and casters, it is designed for durability and mobility in athletic, touring, and event environments. All appliances are professionally installed and secured by LM Cases’ in-house Custom Integration Department for turnkey operation.
University Of Nebraska Tool Workstation
This case was designed for the University of Nebraska for use as a portable work bench. The case is designed to be used as a work station in the locker room when the team is home, and a portable solution for away games. When the team is ready to travel, the lids can simply be closed and the case is ready to go.
Klondike Sound Custom Yamaha QL5 Case
This case was designed for Klondike Sound. The case is a 3 piece design and features a custom 12" doghouse with an inset lid.
All In One Portable Photo Booth Case
This case was designed for Apollo Photobooths. The case is designed with quick set up and tear down in mind: all items are pre wired allowing the operator to simply plug the case into a standard outlet and hinge open a protective panel once arriving at a job site.
50” Confidence Monitor Case
This case was designed for RCI Sound Systems. The case features a 50" monitor mounted in a custom enclosure to hold the monitor at a fixed angle for "confidence monitor" applications. The enclosure is built out of 3/4" Baltic Birch plywood and features top & bottom mounted vents, rear access door and VESA pattern holes for mounting the monitor. Custom CNC cut foam cradles were created to provide additional support at the bottom of the monitor.
Yamaha QL5 Mixer Case
This case was designed for the Yamaha QL5 console. The case is a 3 piece design allowing the console to sit in the case tray during use.
20 Capacity Portable iPad Sync/Charge Cart
This case was built for Holy Family Elementary school. The case is used as lockable storage for 20 iPads allowing the school to wheel the case from their IT room to individual classrooms. The LM Cases Custom Integration department designed the case to be extremely simple to use and portable for all users ranging from IT techs to children.
Volt Lites FOH Workbox
This case was designed as a personal workbox for Harrison Lippman at Volt Lites. The case is designed to sit perpendicular to a lighting console on the left hand side. The workbox is split into 2 sections: the right section holds support items like monitors and cables for the lighting console, once the console is set up the case can be rolled next to it. The left side of the case has storage for Harrison's backpack as well as a drawer for file storage. The split lid design allows the access to daily items like his back pack and files with out interfering with the deeper side next to the console.