Products
University Of Georgia Sports Nutrition Case
This case was designed for the University Of Georgia. The case is designed to be a in facility vending cart to despense fresh food and beverages to athletes.
Waterproof Case For Presonus 16.0.2. Mixer
This case was designed for the Presonus 16.0.2. mixer. The design is based around the Storm iM2720 waterproof case and features a custom CNC cut foam insert. The mixer slides into the insert by placing the arm rest in first. The foam insert holds the mixer from the top as well as the sides to provide maximum protection for your mixer. Under the mixer is a combination storage compartment that contours your iPad, below the iPad compartment is additional storage for cables. The iPad compartment is designed around an iPad in an Otterbox to accommodate most all aftermarket iPad cases.
The storm case features dolly casters and an extendable handle for easy transport.
Presonus 16.0.2. Mixer Roadcase
This case was designed for the Presonus 16.0.2. mixer. The case is built out of 1/4″ plywood and features a telescoping aluminum handle and inboard dolly casters. There is a storage compartment under the board for storage that is large enough to fit an iPad.
Presonus 16.0.2. Case – LM XL Series
This case is designed for the Presonus 16.0.2. mixing console. The case is part of our XL Series line of cases, these cases feature a custom aluminum extrusion wrapped around a 1/4″ piece of plywood. The aluminum extrusion utilizes an interlocking tongue and groove to allow for strong lid and base alignment. The aluminum and plywood panel combination results in a strong, lightweight and inexpensive case.
The mixer is surrounded by 1″ foam and has a 2″ deep accessory compartment below the mixer. The exterior case is equipped with 2 surface mounted twist latches and 3 surface mounted spring loaded handles. Any of our standard colors are available at no additional charge.
Fresno State Custom Sideline Tub Trunk
This case was designed for the Fresno State Athletic Department. The case is based around our deluxe tub trunk, you can CLICK HERE for more info on the deluxe tub trunk.
We removed the top two bins and replaced them with 6 Tilt Lock bins for small parts storage, because the bins are so shallow; we added a trap door to the back of the case to create an accessory compartment behind the bins to maximize the storage capacity of the case. The case features 6 removable plastic tubs and 2 wood drawers for storage. The drawers are mounted on heavy duty Accuride drawer glides and feature 12 storage compartments in each drawer.
The case exterior is constructed out of 3/8″ plywood and features a 2 color silkscreen of the school’s logo and 8″ field casters.
Special thanks to Fresno State!!
Craftsman Tool Chest ATA Case Workbox
This case was designed for Hitachi Medical Systems for use in setting up their trade show booth. The case holds a 40″ Craftsman tool chest in a custom ATA case so Hitachi can take their tools on the road.
The case features a removable front lid and a hinged top lid allowing full access to all features of the tool chest. The case interior is lined with hard 1″ PE foam providing maximum support and durability for a life on the road, the case exterior is built from 3/8″ plywood panels and features 4″ Colson casters.
Special thanks to Hitachi Medical!
Presonus StudioLive 16.4.2 w/Integrated iPad Doghouse
This case is designed to hold the Presonus StudioLive 16.4.2. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam piece to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
A Designs REDDI Waterproof Hard Case
This custom case by LM Cases is precision-designed to protect the A-Designs REDDI tube direct box with a CNC-cut PE foam insert that supports the unit and preserves access to its controls. Housed in a waterproof Storm case, it also includes a dedicated compartment for the power cable—rugged, secure protection for a premium piece of gear.
Summit Audio Half Rack Processor Case – 2BA-221/TLA50/FeQ-50/TD-100
This case is designed to fit all Summit Audio half rack audio processors including the: 2BA-221 preamp, FeQ-50 EQ, TLA-50 compressor and the TD-100 DI. The case holds each unit in a custom CNC cut foam insert that contours the front and rear allowing the knobs and switches to remain untouched. There is storage below the unit for the power cord. The foam is mounted in a Pelican 1470 case this both lightweight and completely waterproof.
5 Drawer Locker Room Workbox
This trunk was designed for UCLA to provide a storage solution that can act as a cabinet when the team is home and can also be brought on the road. The trunk features 5 drawers and a removable lid that can double as a table.
Presonus Studiolive 24 With iPad Integrated Doghouse
This case is designed to hold the Presonus StudioLive 24. The case features a custom doghouse that cradles the console from rear and sides. The side arms help the console remain stable in user position, each arm features custom foam pieces (see picture below) to prevent wearing the console paint during its life on the road. The arms are cut to match the side vents on the console to provide adequate ventaliation. The doghouse is built out of 3/4″ birch and is black texture coated.
World Wrestling Entertainment Portable Media Rack Center
This project was handled by our Custom Integration department. The process started with WWE and LM working together on gear selection and how the media rack would function in the brutal WWE touring environment. The rack needed to handle a wide variety of input signals to fulfill its duty as a multi format portable preview unit. The LM Custom Integration department handled everything from the sale and installation of the equipment to the custom metal work needed for rack panels and doors.
Athletic Trainers Zoll AED Transport Case
The response kit its based around a Pelican 1600 case. The kit includes a custom foam insert to hold a Zoll AED Plus, bag valve mask, scissors and a blood pressure cuff. The case also comes equipped with a two layer storage unit in the lid for small items like an epi-pen and first aid items.
The case interior is lined with Crosslink foam, which is a closed cell; class A surface. This means that the case interior will not absorb liquids and can be easily cleaned. The top of the foam insert is covered in 1/4″ black plastic for maximum durability.
The response kit is designed to be portable and water proof so athletic trainers can use it for all sports and in all conditions. Its yellow color makes it easily visible for quick access in emergency situations.
Indoor Sports Storage Cart
This cart was designed for indoor sports and as an organizational cart for gyms. The cart is built to be exceptionally durable and easy to push. To accomplish this, we employed 5″ casters with a central locking brake system. To engage the brakes, simply push down on the red pedal; this simultaneously engages both brakes. The case also features a large 18″ stainless steel push handle for exceptional maneuverability.
The cart top is lined with 1/2″ UHMW plastic to provide a non stainable durable surface for water coolers and liquids. The cart interior features 2 built in drawers mounted on HD Accuride glides and 4 removable plastic tubs. The interior compartment is covered by a removable lid that is stored magnetically to the back of the cart when it is in use.
The cart exterior features 4 recessed handles and 2 spring loaded D-Ring shackles. The D-Ring shackles are great for mounting anything from ball bags to additional carry cases, adding another level of functionality. 2 coated cables with carabiners are included with the case for use with the D-Ring shackles.
Athletic Trainers Taping Trunk
This case is the pinnacle portable tape trunk for the mobile athletic trainer. The case features a removable front lid that turns into a table that is the same height as the case creating a work surface that is 94″ long! The case and lid are reinforced to support the weight of a player to allow for taping on either or both sides simultaneously. Also included is a blue Armasport 24″ x 72″ x .625″ foam pad to put on the work surface. The pad is designed to hang over the side of the lid or case to provide maximum comfort to the athlete.