Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 13-0023
Test Identifier Case
This case was designed to hold a Biological Identifier Kit. The case features custom CNC cut foam inserts for each of the delicate components. The interior case features a 3/8" removable tray with a generic storage area mounted below. The exterior case is built out of 3/8" plywood and featured deep recessed handles & 3 field replacable inboard dolly casters.
- REFERENCE: 13-0023
- CATEGORY: Military CATEGORY: Other Industries
Related Products
KC Chiefs Athletic Trainer’s Locker Room Medical Workstation
This custom locker room trunk was built for the Kansas City Chiefs as an all-in-one workstation for their traveling athletic trainers. The trunk holds items in neat and organized bins and provides a work surface for tasks.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
6RU Flyable Network Switch Rack For Dusty/Industrial Environments
This rack is designed to provide isolated dust proof storage of networking equipment in installed dusty and industrial applications. The rack can be flown or floor mounted. The case is designed to pull cool air through the bottom and exhaust hot air through the case sides. At max flow rate, the air in the rack will be replaced 90 times per min.
Mallinckrodt DSir Medical Device Transport Case
This case was built for Mallinckrodt Pharmaceuticals to hold their DSir MRI unit. The case design allows the device to simply be rolled into the case and locked into place without the need for additional packaging materials. The case was designed to exceed the ISTA 1B shipping certification. The case was tested by an independent testing facility to ensure that the build methods would exceed this packaging standard and protect the DSir against any shipping scenario.
Custom Surgical Tray Transport Case
This case was designed to transport surgical instrument trays. The case features 4 compartments with removable, adjustable 3/4" Birch shelves to accommodate trays of varying sizes. Each removable shelf is carpet lined in the center and black painted at the edges to allow easy removal.
Los Alamos National Laboratories Portable Testing Workstation
This case was designed for Los Alamos National Laboratories as a portable testing workstation. The case holds a monitor mounted in the lid, a 16RU shockmounted rack section and a custom foam lined compartment for the Dell computer.
Advanced Defense Solutions Metal Testing Workstation
This case was built for Advanced Defense Solutions to provide a portable workstation for their factory floor for metal testing. Metal quality control is done by a scanner mounted on a movable gantry, this gantry scanner is hardwired to a rack mounted control unit. The gantry scanner is held in a CNC cut foam insert in a removable drawer; the drawer is mounted on the right half of the case. The top of the drawer is open, allowing the cable to coil and store above the drawer on hooks. A 20RU shockmounted rack is mounted on the left half of the case providing adequate storage for all processors needed to run the scanner. The rack features recessed spring loaded D-Ring shackles which allow multiple points to tether the umbilical cord that runs the gantry scanner, the rack also features recessed fans to provide additional cooling. The rack, drawer and cable storage is built into a single frame to isolate it from the exterior case and provide shock protection.
The top of the case features a 19" ELO touch monitor mounted on a position control hinge board and telescoping monitor mount. The position control hinge board allows the monitor to be tilted at any angle ranging from 90 - 180 degrees. The telescoping monitor mount features a rotating VESA mount allowing the monitor to be orientated in portrait or landscape views in addition to letting the monitor swing to the left or the right. To the right of the monitor, is a black Formica laminated writing surface. The case also features a retractable 30' cable reel eliminating the need for an extension cord to power the case.
Evertz Microsystems Custom Rack
This case was designed for Evertz Microsystems. The case is designed to hold a custom 40 space unit that weighs 800lbs! The unit needs to travel to different venues and be set up. To accommodate this, heavy duty Colson 4" x 2" casters were used on the rear lid to allow the case to be shipped, and fit through a standard door. The case and unit are extremely heavy; the case is designed to be mechanically lifted by the inner rack shell. In case a forklift or crane are not available, 28 deep recessed handles were used to allow the case to be manually lifted.
HEPA Filter Case
This case was designed for a HEPA filter & hook up accessories. The components are held in a custom CNC cut foam insert that is custom cut to form fit each item. The exterior case is built out of 3/8" plywood and featured deep recessed handles.
PennCare Portable Emergency Medical Station
This case was designed and built for PennCare as a "point of medical care" for EMS responders first on scene. The case is designed to hold medical supplies in a heavy duty portable format allowing the case to be used in the field for disaster response or in hospitals during increased surges in patients. The case features 3 drawers made out of 1/2" Baltic Birch plywood that are finished with wipeable black texture coating. The case features a white Formica work surface with 6 Tilt Lock bins mounted in the case lid. The removable font lid features table legs that allow the lid to be quickly converted into a table for an additional work surface.
Topcon Medical Slit Lamp Case
This case was designed for Topcon Medical to transport their delicate Slit Lamps to trade shows. The case features multiple compartments for various sizes of the companies models. Each compartment is foam lined to match a particular unit and its accessories. The two halves of the case are divided by a foam lined hinged door keeping the contents in each compartment during transportation
Faxitron Bioptics Transport Case
This case was built for Faxitron Bioptics. The case is designed to carry delicate pieces of medical equipment from Faxitron to final locations at hospitals, labs, and doctors offices. The case is designed to be simple to use as well as very durable to withstand un-palletized LTL shipment.
Bridgestone/Firestone Pegisys Test Case
This diagnostic test equipment case was designed for Bridgestone/Firestone. The case will be shipped via UPS, so durability and light weight were a top concern on this project. The case was built using our proprietary 3/8" composite panels which allows the case to be light weight as well extremely strong.
Boeing Chooses LM Cases For Troemner Test Weight Case
This case was designed for Boeing. The case is designed to hold 6 Troemner calibration weights in a custom CNC cut insert made out of 4lb PE foam.