Products
LM Cases Deluxe Amenities Case
This case is designed to be everyone's best friend on the road! The case features a microwave, refrigerator, coffee pot, and a Bose Sound Dock for tunes! The front and rear removable lids have table legs mounted in them to make portable dining or serving a snap! In addition, the case also sports a small cabinet with a shelf and a drawer for storage. The exterior case is built out of 3/8" plywood laminated with black abs plastic, and rides on 3.5" casters.
Post University Tape Trunk
This case was designed for Post University. The case is based around our Econo 2 trunk and features 3 - 3/8" plywood trays to hold tape and miscellaneous items. The bottom tray features 24 dowel rods for holding tape rolls, the top two trays feature 3 compartments with removable dividers.
LM Cases “Pimp” FOH Chairs
When a standard chair wont do....its time for the ultimate fly maneuver: LM Cases Pimp Chairs. These chairs are built out of 3/8" plywood laminated with black leather and outfitted with white shag that is enough to bring a tear to Shaft's eye...and that aint no jive!
Albany State University Side Line “Tub” Trunk
This case was built for Albany State University. The case features 8 removable plastic bins with clear plastic lids. The exterior case is built out of 3/8" plywood and features white UHMW plastic runners on the back of the case to allow the case to be stored in a bus bay. The exterior also features 8" field casters for better portability on grass and uneven terrain.
Heavy Duty Feeder Cable Trunk “Sammy Size”
This trunk is designed to be the backbone of your show, pack your heaviest cables inside and stack gear on top; this trunk is designed to take any abuse you can throw at it. The trunk is built out of 3/4” Baltic Birch that is glued, stapled and screwed together. The case sides feature interior wood cleats for additional strength and the case lid features 3/4” Birch alignment strips to keep the case square even under extreme load. The case features a removable 3/4” Baltic Birch divider that splits the interior in two equal compartments. To add rigidity, the case employs a 1.5” thick bottom and 4” x 2” Colson Encore casters. All hardware is double recessed into the exterior to provide as flat of an exterior surface as possible. The case exterior is finished in black texture coating and features black powder coated hardware to help the case blend in backstage environments.
Nikon D60 Case - Pelican 1400
This case was designed to hold a Nikon D60 camera and accessories. The case features 4 separate storage compartments for the camera body, lens, charger, and accessories. The case also features a storage pocket in the lid for any manuals or paper work.
38 Capacity Mic Stand Case
This case was designed for Forty Two Inc. The case is designed to hold 20 tall mic stands, 18 low profile stands and accessories. The case features a 3/8" marine grade plastic divider network to accommodate either straight or boom stands, the case also features a 3/8" plywood accessory box designed to round stand bases.
University of Arkansas Sideline Workbench
This case was built for the University of Arkansas. The case is designed to hold all the parts needed to repair any of the players equipment that may break during a game. The interior features 6 - 1/2" Baltic birch drawers mounted on HD Accuride drawer glides, 24 plastic bins to hold small items, a cordless drill and battery charger, and a black formica work surface.
Eiki LC-X80 Lens Case - Pelican 1510
This case was designed for Wagner Media. The case is designed to hold a Eiki LC-X80 projector lens. The case features a CNC cut insert installed into a Pelican 1510 case. The insert is cut out of ester foam and capped with crosslink foam which allows the lens to be placed in the insert with out lens caps and not scratch the glass.
Bowling Green Helmet/Shoulder Pad Sideline Trunk
This case was designed for Bowling Green University. The case is designed 7 pairs of back up shoulder pads and 10 back up helmets in case any of the players gear breaks during the game. The interior also features 2 drawers with dividers for misc. parts storage, and a Lexan door over the helmet compartment.
Avid Digidesign Venue Profile ATA Case
This case was designed for the Audio Visual Professional Group. The case is a 3 piece console case with a removable top and front lid. The removable top lid features 2 foam lined compartments for up to 19" widescreen monitors, there are also 2 slide out keyboard trays under the console.
Gretsch Catalina Jazz Drum Cases
These cases were designed to individually fit the Gretsch Catalina Jazz kit. Each drum case is built out of 1/4" plywood and lined with 1/2" foam to keep the cases as light and small as possible. The cases also feature flat triangle corners so they can stack when loaded and nest inside each other when they are empty.
East Carolina Laundry Trunk v2
This case was designed for East Carolina University. The case is based on our standard deluxe laundry configuration with the addition of 4 plastic lined compartments in the left section of the case, and one additional compartment on the right side. The allows for better segregation of clean and dirty clothes when the team is on the road. All compartments are lined with HDPE plastic so they are easily cleaned. Each side of the case also features a 1/4" Lexan door, and trap doors to load the laundry compartments with dirty clothes while the case is closed.
University Of Arkansas Laundry Trunk
This case was designed for the University Of Arkansas. The case is built out of our proprietary 3/8" composite panels laminated with black fiberglass laminate. The interior of the case is lined with HDPE plastic to allow it to be easily wiped clean. Because the case is built out of our composite panels and not traditional plywood, the case can get wet and not get moldy or rot.
Mohegan Sun Third Pack Cable Trunk w/Custom Foam Logo
This trunk was designed for Mohegan Sun Casino. The case has exterior dimensions of 30" x 30" x 24" to allow it to be packed 3 wide in any configuration in a 90" truck. The interior of the case features custom inlaid foam that had the Mohegan Sun logo as well as "Video" for the video department at the casino.