Products
Rain Gear Trunk
This case was built for Youngstown State University. The case is built out of 3/8" plywood laminated with red ABS laminate. The case interior is lined with high density polyethylene (HDPE) plastic to keep all moisture contained.
Calix Trade Show Case
This case was built for Calix. The case is designed to hold a custom display rack used to hold the companies equipment at trade shows. The inner rack needed to protected from shipping abuse because as it is an integral part of Calix's show booth.
Presonus StudioLive 24.4.2 Mixer Case With Casters
This case was designed and built for Avex Inc. The case features a 2" foam lined interior, and custom foam blocking to keep the mixer in place during transportation. The case is built out of 3/8" plywood laminated with red ABS plastic. The exterior of the case features a custom silkscreen of the customer's logo, 7 handles, and 3.5" Colson casters.
JBL VRX 932LAP Speaker Case
This case is designed to hold 2 JBL VRX 932LAP speaker cabinets. The cabinets ride on their sides in a 1" PE foam lined case that features a divider to keep the speakers separated. The exterior case is built out of 3/8" plywood and features 3.5" Colson casters.
Elation Platinum 5R Case
This case was designed for Atomic Professional Audio. The case is built out of 1/2" plywood and features storage for 2 Elation Platinum 5R light fixtures. The case also features an accessory compartment, stacking caster wells in the lid, deep recessed handles, and 4" Colson casters.
12 RU Pocket Door Rack
We all know how stressful touring is, every thing is rushed and space is at a premium; these cases are designed to help the touring professional worry about one less thing: "where do I put all of my rack lids." When moving in and out of venues it is easy to forget simple items like rack lids, this design also solves the issue of storage!
Ampeg SVT CL Head Case
This case was designed for Atomic Professional Audio for their backline department. The case is built out of 3/8" plywood laminated with charcoal ABS plastic and features deep recessed handles and 3.5" Colson Casters. The case is designed to fit all models of Ampeg SVT heads.
Marshall JCM 800/900/2000 Head Case
This case was designed for Atomic Professional Audio for their backline department. The case is built out of 3/8" plywood laminated with charcoal ABS plastic. This case is designed to hold a Marshall JCM 800, 900, or 2000 head, with the units foot switch. The case features 3 upgraded deep recessed handles.
Fender Hot Rod DeVille 212 Case
This case was designed for a Fender Hot Rod Deville 212 amp. The case is built out of 3/8" plywood and features a 1" foam lined interior, deep recessed handles and 3.5" Colson casters.
18 Space Flat Panel Rack
This rack was built for Advanced Lighting & Sound. The flat panel racks great for situations where there isnt enough space to store traditional rack lids. These cases are also great for situations when you need to stack racks. With traditional racks, you need to move the casters in to make them hit the rack shell for stacking, flat panel racks allow you to keep casters in their traditional wide stance position for stacking.
Yamaha Motif 8 Case
This case is designed to hold a Yamaha Motif 8, and sustain pedal. The case is built from 3/8" plywood and features a foam lined compartment for the keyboard and a carpet lined compartment for the sustain pedal/accessories. The case also features inboard dolly casters to make it easier to move.
16RU Rack w/Widescreen Monitor Mount
This case was built for Accent Electronic Systems. The case is designed to hold a 19" LCD monitor on a telescoping Premier mount, with space for a mouse, keyboard and 16 RU of gear below.
Custom Yamaha LS9-32 Case With Doghouse
This case was built for RCI Sound Systems. The case is designed with a removable nose piece to allow easier access to the front of the console. The case features a 2" foam lined interior, a gloss black birch doghouse and 3.5" Colson casters.
Soundcraft Ghost LE Flight Case
This case was built for World Wrestling Entertainment as part of their mobile production department. The case features a custom 3/4" birch doghouse that allows the doghouse lid to meet with the forward set meter bridge.
Pelican 1400 Smaart RTA Kit
This case was designed for the Audio Visual Professional Group. The unit is designed around a orange Pelican 1400 case and features a custom insert that holds the LM provided Audix TM1 and M-Audio Fast Track Pro.