Products
Fender Acoustasonic Junior DSP Amp Case
This case was made for the Salvation Army Band. This Surface Hardware series case is built from 1/4" plywood and features a 1" foam lined interior and 3.5" Colson casters.
Florida Gators Medical Trunk
This case was built for the Florida Gators to hold all the teams medical equipment. The lid features a storage unit that has 24 individual drawers for small items such as bandages. The lid also features 2 storage compartments for bottles, the items stored in the lid are kept in place during transport via a laminated panel with Southco slam latches. The interior of the case features a large carpet covered work surface, with 3 large drawers mounted on Accuride drawer glides for storage.
Avid SC48 Compact Road Case
This case was built for Clair Global Systems. The case is designed to be used in an installed application where the console is moved from building to building on a campus. The case is a very compact design allowing for easier moving and storage in campus.
Florida Gators Tape Trunk
This case was designed for the Florida Gators. The case is built to carry the teams tape in removable caddy's stored in drawers. Each caddy is made out of 1/4" laminated plywood and features 30 dowel rods for tape storage. The caddy concept allows the case to be used like a traditional workbox, in the sense that you can open the drawer and grab what you need quickly. The beauty of the design is that you can take some caddy's and leave some in the workbox, this allows multitasking as well as organization.
Portable Server Rack For Oracle Sun Fire X4140 Server
This case is designed to transport an Oracle Sun Fire X4140 server. The case and inner rack shell are built from 3/8" plywood. The inner rack shell is 30" deep and surrounded by 2" foam and features front and rear pre tapped rack rail.
4 Capacity NEC X46 Flight Case
This case is designed to hold 4 NEC X46 monitors with wall mounts attached. The case is designed in this configuration to allow for multiple monitors to travel together for video wall applications. The case is 45" x 48" to allow for half pack configurations for easy truck packing and transportation.
Mitsubishi VS-L46XM70U Flight Case
This case was built for Mitsubishi Digital Electronics of America, the case is designed to hold monitors used in Mitsubishi's trade show booths.
Rutgers University Suit Jacket Trunk
This case was built for Rutgers University. The case is built out of 3/8" plywood and laminated with red abs plastic. The case is designed to hold suit jackets for transport and storage between games. The interior of the cases is carpet lined with two aluminum hanging bars for clothes.
Apple iPod Touch & MacBook Pro Case
Although we can't tell you who this case was for. We can tell you that it was designed to hold 45 iPod touches, 3 MacBook Pro laptop's and an AirPort wireless router. The interior of the case features a custom CNC cut insert cut out of PE foam to allow each component its own custom compartment. This not only keeps things organized, it also allows for a quick visual scan of the case to see whether all of the components are accounted for. The interior also features a vinyl document sleeve in the lid for storing documents while the case is on the road.
Kansas State University A/V Trunk
This case was built for Kansas State University. The case is designed to hold all of the audio visual equipment needs to display films before each game. The case holds 2 JBL Eon 10 speakers in separate foam lined compartments. The left compartment of the case features a removable tray with a custom CNC cut foam insert that holds two Radial AV direct boxes (provided by LM Systems division) and a small mixer. There is a foam lined compartment under the tray to hold all the cables and projection equipment needed to complete the system.
Yamaha M7CL-48 Flight Case
This case was built for Campus Crusade For Christ. The case features a 2 piece removable lid to allow access to the console's front headphone jack. The interior of the case features custom angled foam blocks to support the console from the side, this allows the angled screen to be untouched by the case. Because the top lid of the case only touches the console on the sides, damage from removing the lid is minimized.
D&B Audiotechnik Q1 Loudspeaker Flight Case
This case was designed for VA based sound company Overland Pro Audio. The case is designed to be modular allowing Overland to use the case for all types of events.
Chroma Q Color Force 12 Case
This case was built for Presentation Services (PSAV). The case is built from 3/8" plywood and features a removable tray also built from 3/8" plywood. The case is designed to hold 6 Chroma Q Color Force 12 light fixtures in a custom CNC cut foam insert. The accessories that go with the lights are designed to be transported in the tray.
Ampeg 610HLF & Gallien Krueger 700RB Case
This case was made for dmr-rents.com. The Ampeg 610HLF case is designed to stack with a matching 4RU shock mounted rack that holds the Gallien Krueger 700RB bass head.
World Wrestling Entertainment Still Photo Workbox
This case was built for World Wrestling Entertainment to hold still photography equipment. The case is built out of 1/2" plywood laminated with yellow ABS plastic, and features 9 drawers mounted on Accuride drawer glides. The interior of the case also features 2 large ozite lined accessory compartments. The case lid doubles as a table and features 2 sets of height adjustable table legs.