Products
Blue Man Group Chooses LM Cases For Akira Video Wall Cases
This case was built for the Blue Man Group to house 2 elements of their Akira video wall. The case is designed to hold 2 Akira AML4601ZM units with their wall mounts attached to allow for easy rigging. The design features a 3/4" birch center divider with 2" Crosslink foam on each side to protect the monitor screens during transport, loading the monitors in this fashion allows the mounts to be on the outside of the case for easier removal.
World Wrestling Entertainment Pretape Workbox
This case was built for World Wrestling Entertainment. The case was designed to hold misc. items used in pre-taping the WWE's events. The case is built out of 1/2" plywood and is laminated with Forest Green ABS plastic. It is also outfitted with a 1/4" aluminum forklift guard and 4" x 2" HD casters.
University Of Guelph Trainers Trunk
This case was built for the University of Guelph. The case was designed to be used as a trainers utility case, with adjustability and multi-purposing in mind. The case features custom movable shelves in the lid allowing the shelves to be moved to accommodate a variety of items that need to be stored in the lid. Also included are 2 removable plastic bins with removable and customizable divider networks in each bin. The top portion of the case features a small plastic bin unit that allows for storage of small parts and pieces. The top compartment also features 2 storage spaces and a drop down door that doubles as a work surface.
Varilite VL1000 Case
This case was built for Mohegan Sun Casino. The case is designed to hold a single Varilite VL1000 fixture and floor base plate. The fixture is designed to lay down in the case and be supported by the yoke via foam. The lens of the light is held in place via 2 foam wrapped plywood blocks in the front of the case.
IVCI International Video Conferencing Workstation
This case was built for International Video Conferencing. The exterior case is built out of 1/2" plywood, and features a 1/2" inner rack/worksurface structure built out of 1/2" Baltic Birch. The entire inner structure is shock mounted using 2" foam on all sides. The rack portion features dual 14RU racks with 25" of usable space between the front and rear rack rails. The top portion of the inner structure is laminated with black formica to allow for a smooth work surface. The top work surface also features a 1RU recessed rack slot and a custom built housing for a LCD touch screen controller.
Florida Gators 72 Capacity Shoe Trunk
This case was built for the Florida Gators. It features custom slots for 72 pairs of shoes. The interior compartments of the case are constructed out of 3/8" plastic to allow for easy cleaning. The exterior of the case is built out of 3/8" plywood and features dark blue abs laminate and a custom silkscreen of the Gators logo.
Presonus StudioLive 24.4.2 Case w/Tilt N’ Travel Option
This case is designed for the Presonus Studiolive 24.4.2 digital mixer. The case is built out of 1/4" plywood and features recessed hardware in addition to a telescoping aluminum handle and 3" inboard dolly casters. The case also features an accessory compartment behind the mixer for storage of peripherals such as cables, littlelites etc..
Houston Christian High School Equipment Trunk
This case was built for Houston Christian High School. The case was built out of 3/8" plywood and features a custom silkscreen of the school's logo. The case is designed to hold helmets, shoes and other spare parts needed to be transported by the school's equipment managers. The case features 2 removable trays with dividers and Lexan covers to keep small parts and pieces separate and organized during transportation.
Air Force Chooses LM Cases For Coaches Trunk
This case was built for the Air Force Academy. The case is built out of 3/8” plywood and is laminated with dark blue ABS and features a silkscreen of the teams logo. The case is designed to be used as a laundry trunk and for general storage. The right compartment is designed for laundry storage, clean clothes are hung on the clothes rod; after the game players can simply walk by the case and toss their dirty clothes into the trap door on the side of the case. The compartment features a HDPE plastic lined interior for easy cleaning and a clear Lexan door to keep dirty clothes contained during transport.
LM Cases Standard Coaches Trunk
This is our standard coaches trunk. The case is built out of 3/8” plywood with your choice of laminate colors (dark blue shown), and outfitted with recessed hardware and 3.5” casters. A variety of options are available including, fiberglass laminate options, composite panels to replace traditional plywood panels, upgraded casters including large diameter field casters, vents, trap doors, and silkscreens. All of our cases are built per order, one at a time; if there is a custom option that you would like to add it can be applied during the design phase of the ordering process.
University of Georgia Coaches Trunk
This trunk was built for the University Of Georgia. The case is built out of 3/8” plywood laminated with red ABS plastic and features a silkscreen of the team's logo. The case features 15 storage compartments in each side of the case, to hold a variety of items including shoes and players personal belongings. The left side of the case features a clear Lexan door to keep the items separated from the right compartment. Each side of the case also features 2 drawers which are outfitted with a custom removable divider network. Each drawer is mounted on heavy duty Accuride drawer glides to ensure years of reliable performance. The case also features 4” Colson casters, and recessed hardware.
Princeton Sideline Trunks
These trunks were made for Princeton University. The trunks are built out of our proprietary 3/8" composite panels and feature custom silkscreens of the teams logo. Each trunk is equipped with 8" foam filled field casters, a pad lockable hasp latch, and 4 recessed handles. The trunks have interior dimensions of 43" wide x 20.5" deep by 22" tall and weigh 100lbs. Special thanks to Princeton University!
Stanford Laundry Trunk
This case was made for Stanford University. The case is designed to transport and store team apparel. The unit is designed to hold clean clothes on hangers via hanging clothes bars. Equipment managers can simply open the case and allow team members to pull their uniforms out in the same manner as a home closet.
CoachComm Tempest FX Sideline Accessory Rack
This case was made for CoachComm. The case is built out of 3/8” plywood, and features silkscreens of the companies logo, pad-lockable hasp latches, recessed cable hatches, and 8” foam filled field casters.
Florida Gators Workbox
This trunk was built for the Florida Gators to provide a quick access storage solution that can live on the sideline during games. The trunk features 8 storage drawers built out of 1/2" Baltic Birch. Each section of 4 drawers are mounted in an independent cabinet that is isolated from the exterior case. Building an independent inner cabinet from the exterior case prevents exterior stresses from transferring to the drawer glides; the exterior panels can flex without affecting the drawer glides. This design is superior to mounting the drawers directly to the exterior case and will provide years of service.