Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 10-18806
LM Cases Custom 10 Space Shock Mounted Rack/Mixer Steve Harvey Morning Show
This case was built for the Steve Harvey Morning Show. The case is designed to hold a rack mounted mixer and rack mounted processing equipment. The mixer section has 11 rack spaces, and the equipment section has 10 spaces with rear rack rail. The entire rack structure is mounted in a 2" foam surround to provide shock absorption on the road. The outer and inner structures are built out of 3/8" plywood. The case features 3.5" casters mounted on a 3/4" birch caster pad.
Special thanks to the Steve Harvey Morning Show!
- REFERENCE: 10-18806
- CATEGORY: Audio/Visual
Related Products
16 Space Rugged Server Transit Rack w/Fans & Custom Power Panels
This custom portable server transit case by LM Cases is built for safely transporting servers in touring environments. It features three dedicated rack sections that separate servers from power and control equipment, including a 2U external rack for KVMs, a shock-isolated 16U main server rack with adjustable rails, and a 5U rear rack for power distribution, fan control, and signal I/O.
The main rack includes vented Lexan and marine-grade doors, temperature-controlled exhaust fans, and heavy foam isolation for protection. Integrated power and networking use locking True1 and Ethercon connections, with included power and network cables designed for durability and easy labeling. A heavy-duty storage drawer provides additional space for accessories.
Constructed from laminated ½” plywood with reinforced steel framing, the case is equipped with recessed handles, lockable latches, table-leg lids, and locking casters, making it a rugged, mobile, and tour-ready server transport solution.
Behringer Wing Compact Fly Date Waterproof Case
This custom LM Cases solution is designed to safely transport a Behringer Wing Compact mixing console for users shipping via commercial airlines. The console is secured in a precision-cut PE foam insert with nonabrasive Crosslink foam that supports the monitor and a lid-mounted foam block that locks the console in place at the wrist rest.
The insert includes cutouts for the console’s feet and an integrated accessory compartment for cables and accessories. Housed in a waterproof SKB iSeries case, the design provides compact, airline-friendly protection for professional audio transport.
Dual 2U Airline Fly Rack
The Dual 2U airline fly rack system built by LM Cases is perfect for equipment that needs to travel by commercial airlines. The system includes 2 removable, stackable 2U rack shells with a lightweight Pelican 1637 Air case.
Custom FOH Workstation For Avid S6L-32D Console
This custom installed workstation was designed to house an Avid S6L-32D console as a permanent house console setup for a theater. The workstation includes dual 14U rack sections, three storage drawers, and an integrated workspace for live sound operation.
Constructed from ¾” Baltic Birch plywood with a black textured finish, the workstation features a 5.25” deep doghouse with a hinged lid to conceal console connections. Two fully articulating Ergotron monitor arms provide flexible screen positioning on either side of the console, and a slide-out keyboard shelf mounted on heavy-duty Accuride glides sits beneath the main work surface.
The lower section houses two 14U racks with vented rear doors, along with three drawers for equipment storage, protected by a removable clear Lexan cover. The workstation is finished with recessed Penn Elcom handles and 3.5” Colson casters for mobility.
17 Space FOH System Drive Rack w/Drawer
This custom FOH processing rack case is designed to store and transport rack-mounted equipment and accessories for front-of-house audio systems, while also being adaptable for wireless microphone, video processing, or other rack applications.
The case features a shock-mounted 17U rack with front and rear rails, isolated by 2” foam to protect sensitive equipment during transport. A heavy-duty storage drawer made from Baltic Birch provides additional space for miscellaneous gear and accessories.
Constructed from ABS-laminated plywood, the case includes 4” Colson casters for mobility and custom MSA logo and “FOH Drive” stenciling, making it a durable and clearly labeled solution for live production environments.
4RU Flyable Network / DSP Rack For Audio Deployments
This custom flyable network rack was built for Brown Note Productions to position network switches and DSP equipment close to PA arrays.
The system features a welded steel fly frame with a 4U rack, designed to be suspended from a line array bumper. The inner frame includes six forged steel hoist rings—four for load bearing and two for safety tethers—each rated for high load capacity with industry safety certifications.
The rack includes front and rear rack rails, safety blocks to prevent equipment from slipping out, and a marine-grade plastic dust cover with space for cable routing. Vibration isolation mounts separate the inner fly frame from the outer case to protect equipment during operation.
The exterior is built from ABS-laminated plywood with recessed handles, serving as a protective shell while the internal frame supports the load when flown.
Broadcast CCU / Switcher Rack Flypack
This custom ENG broadcast rack case was built for Panavid to support mobile broadcast and production workflows.
The case features an upper 12U rack section designed for preview monitors and scopes, along with a perpendicular 1U rack space for a Clear-Com base station. Behind the rack are three storage drawers with configurable dividers for organizing accessories and equipment.
A locking center drawer houses a Blackmagic ATEM switcher and Panasonic camera controller, with additional rack space for a router panel and an integrated wrist rest for operator comfort.
The lower section includes a 24” deep 12U rack with adjustable rail sets for additional broadcast gear. Constructed from ABS-laminated plywood, the case features recessed handles, locking casters, and removable lids with table legs, making it a durable and mobile solution for broadcast environments.
Midas Heritage 2000 Channel Strip Transport Case
This custom transport case was designed to safely store and ship four Midas Heritage 2000 channel cards for touring or repair.
The interior is lined with anti-static PE foam with custom dividers that keep each channel card separated and protected. The insert is designed so knobs and potentiometers do not contact the foam, while also accommodating the wire looms on the bottom of each channel.
The exterior is built from ABS-laminated plywood and features recessed latches and a recessed handle, creating a compact and durable case for transporting sensitive audio components.
Yamaha TF1 Installed FOH Workstation
This custom installed workstation was built to house a Yamaha TF1 mixing console for a front-of-house (FOH) church application.
Constructed from ¾” Baltic Birch with a black textured finish, the workstation includes a custom-fitted console compartment with ventilation and marine-grade brackets to secure the console in place. A 16U rack section provides additional space for audio equipment and features a sliding pocket door in the front and a vented rear lid.
Power and signal connections are managed through an LM Tour Systems inlet panel with Powercon and configurable D-series connector ports. The case is finished with recessed hardware and 4” Colson casters, creating a durable and mobile solution for installed audio systems.
20U Portable Server Transit Rack Case
This custom 20U portable transit rack case was designed for transporting servers into data centers while supporting RFID asset tracking.
The rack features clear Lexan front and rear doors, allowing equipment to pass through RFID portals without removing the servers. Inside, a shock-isolated rack shell surrounded by foam protects equipment during transport. The rack includes front and rear rails with deep mounting depth and a lower storage compartment for accessories and rack hardware.
The exterior is constructed from ABS-laminated plywood and includes 270-degree hinged doors, locking latches, recessed handles, protective runners, and Colson casters for durability and mobility. Each case also includes barcode labeling and unique serial identification to support inventory management.
3RU Pocket Door Rack - 23” Deep Shell
The LM Cases Lo-Pro racks are designed as smaller versions of our Pocket Door Series. These racks are perfect for rental companies and users who need to configure racks per gig. The rails are mounted in slide tracks allowing recesses to be set per application using a standard Philips screwdriver. Each rack contains 3 rail sets. The mid rail set is intended for either rear mounting equipment like amps and drawers or cable management.
Yamaha DM3 Console Road Case
This case is designed for the Yamaha DM3 console. The case features custom cut PE foam that contours the shape of the console. The case exterior is built from light weight ¼” plywood laminated with your choice of ABS plastic colors. The case features 3 deep recessed handles.
Yamaha CS-R5 Rivage PM5 Road Case w/Doghouse
This custom case was built for Mohegan Sun casino for the Yamaha Rivage CS R5 Control Surface. The case interior is lined with custom CNC cut foam that contours the unique shape of the console. The console is held in place from the bottom and back in a Baltic Birch enclosure. The rear of the console is hidden by a doghouse. Built from ¾” Baltic Birch, the doghouse features a double hinged top lid and 2 removable rear vented panels with Southco latches.
4 Space Fly Rack w/Pelican 1620 Case
This 4RU portable flypack is designed portable fly dates in mind. The removable rack shell is built from ½” Baltic Birch plywood. The rack is finished with black textured coating and features 2 deep recessed black handles and large rubber feet. Pre-tapped, 10/32” rack rail is provided at the front & rear positions. 2 rail recess options are provided at ½” and 1”. These recess options allow you to have rail-to-rail depths of 13” - 11”. A custom CNC cut PE foam insert protects the rack with 2” foam at all points. 2” are left open at the front and rear of the rack for any cables or protruding equipment. An accessory compartment is provided under the rack shell for storage.
2U Solid Walnut Angled Studio Desktop Rack For IO, Router Panels & Preview Monitors
The 2U angled studio rack is designed for desktop applications where a router panel or IO panel are required. Built from solid walnut, this rack is both durable and aesthetically pleasing for mobile and fixed production environments.
Yamaha DM3 Tour Grade Mixing Console Road Case
This heavy duty, tour grade case is designed for the Yamaha DM3 audio console. The custom case’s foam lined interior features angled foam blocks the contour the console shape. A doghouse is provided to hide all rear console connections. The doghouse is built from ½” Baltic birch and features a double hinging design for full access. The doghouse is finished in black textured coating.
Yamaha DM3 Mixing Console Case - Waterproof
This waterproof travel case is custom-built to protect and transport the Yamaha DM3 mixing console. The console sits in a precision CNC-cut, PE foam-lined interior that supports the chassis at the screen and palm rest using a Crosslink foam lid block for secure, top-down stabilization. An integrated accessory compartment stores the power supply beneath the console. Built using a lightweight and rugged SKB iSeries waterproof shell, the case provides durable, road-ready protection for this compact digital mixer.
Noise Isolating Portable Rack Case For NewTek Tricaster System
This rack was designed to hold NewTek Tricaster components in an installed application. Noisy equipment is installed in the rack to allow it to remain close to the user in a quiet production environment.
Studio Control Room Storage Rack/Workbox - 6U Solid Walnut
The studio control room storage rack is designed to hold rack mount equipment and peripherals in a decorative unit for installed applications. The rack is perfect for home studios, conference rooms and houses of worship where a high quality, aesthetically pleasing storage solution is required.
4 Space Fly Rack For Deep Equipment
This 4RU portable flypack is designed with deeper rack equipment in mind. The removable rack shell is built from ½” Baltic Birch plywood. The rack is finished with black textured coating and features 2 deep recessed black handles and large rubber feet. Pre-tapped, 10/32” rack rail is provided at the front & rear positions. 2 rail recess options are provided at ½” and 1”. These recess options allow you to have rail-to-rail depths of 18”, 17.5” and 16”. A custom CNC cut PE foam insert protects the rack with 2” foam at all points. 2” are left open at the front and rear of the rack for any cables or protruding equipment. An accessory compartment is provided under the rack shell for storage.