Products
Cedar Lined Suit Jacket Wardrobe Case
This case is designed with the transportation of suit jackets in mind. The case features a Cedar wood lined interior with Cherry corner accents to provide an elegant way of transporting clothing from event to event. Each section of the case features a bronze color hanging bar to hold 20 hanging jackets per side for a total of 40 jackets.
Radial Workhorse Cube 500 Series Chassis Case
This case is designed to hold a Radial Engineering Workhorse Cube 500 Series chassis. The case holds the chassis in a custom CNC cut foam insert that allows the knobs on each card to "float" without coming into contact with the side walls of the foam insert. The foam insert holds the chassis and the power supply. The exterior case is built out of 1/4" plywood laminated with your choice of ABS plastic colors, the exterior case features 3 recessed handles.
Radial SixPack 500 Series Chassis Case
This case is designed to hold a Radial Engineering SixPack 500 Series Chassis. The case holds the unit in a custom CNC cut foam insert that allows the knobs on each unit to float and not come into contact will the walls of the foam insert. In addition to holding the SixPack by its sides a slot is incorporated into the lid to accommodate the handle for rock solid placement, there is also a slot for the units power supply. The foam insert is mounted in a waterproof Pelican 1560 case.
Radial Firefly Tube DI w/JR2 Footswitch Case
This is a custom waterproof case for the Radial Firefly Tube DI, JR2 Footwitch and power cable. The case holds each component of the system in a individual compartment custom cut to form fit each item. The foam insert is made out of high quality PE foam that is cut on a CNC machine and mounted in a Pelican 1450 case.
Chauvet Rogue R1 6 Capacity Case
This case was designed to hold 6 Rogue R1 light fixtures in a 96" x 90" truck pack configuration. The case is 48" wide x 30" deep allowing it to be half packed in a 96" truck and third packed in a 90" truck.
MA Lighting MA on PC / Faderwing Workstation
This case was designed for New World Symphony to be an all in one workstation for their MA Lighting MAonPC and FaderWing. The case holds the two controllers in custom CNC cut plastic brackets that contours the shape of each unit and keep them securely mounted. The case is designed to hold 2 monitors mounted on a position control board allowing them to be tilted in any position within a 180 degree range. All wiring is enclosed in a custom doghouse that includes a 2RU patch section for an IO panel. The case also includes a slide out tray for a keyboard.
NBA Portable Interview Workstation
This case was designed as a portable interview station used court side by the National Basketball Association. The case was designed for The Systems Group who handled the final system integration, the LM Cases Custom Integration department provided the rack mounted IO panel in addition to all of the power input and rough wiring. A case was built for each NBA team to have in their arena for pre and post game interviews, the case is simply rolled out, plugged into power and Ethernet and powered on. The player sits in front of the Panasonic camera and looks at the preview screen mounted in the case lid, lighting is provided by 2 LED wash panels mounted in the case lids.
Daktronics ECCB LED Display Lift Case
This case was designed to hold a Daktronics ECCB LED display. The display is mounted on a custom built linear actuator lift system built by LM Cases. The system is designed to provide a simple solution to transport the display to and from trade shows. In addition to being a transport case, it is also part of the customer's trade show booth. The case is rolled to the back of a 10' x 10' booth and is skirted with black fabric with the customer's logo. The case is designed to hold all items used in the customer's booth in addition to the display, since the case is part of the booth there isn't a need for the on site show services provider to store any empty portion of the case; this allows for fast set up and tear down of the booth. Operation is as simple as removing the lids, plugging the case in and pressing a button!
Northwestern Sideline Sports Nutrition Trunk
This trunk was built for Northwestern University as a portable sideline storage trunk used by their performance nutrition department. The trunk features 6 removable plastic bins, removable clear Lexan dust cover for bins, 2 drawers, 2 removable Pelican 30qt coolers and table legs in each lid.
MIT 5 Drawer Audio Workbox
This workbox was designed for the Massachusetts Institute Technology audio department. The case is design to hold a variety of mics, DI boxes and cables for audio presentations and concerts held at MIT. The workbox features removable foam inserts in each drawer that hold each item in a custom cut compartment.
US Equestrian Amenities Case
This custom mobile amenities cabinet was built for the U.S. Equestrian Team as a self-contained hospitality solution for travel and competition. Constructed from lightweight composite panels with marine-grade plastic interiors for international shipping compliance, it integrates a refrigerator, microwave, Keurig brewer, electric grill, Bose SoundDock, and USB charging hub with centralized power and ventilation. Designed for durability and turnkey deployment, the case provides a fully integrated, road-ready refreshment and charging station.
Midas M32R Venue Install Mixer Case
As part of an installed sound system, our client had the unique need to store and protect the venue's Midas M32R while leaving it wired into the system. Because of limitations at the venue, the console could only be placed on a ledge that was not deep enough to accommodate it. The solution was to build a case that could be secured to the ledge at the rear and hang off at the front. To accomplish this, a set of table legs were cut to allow the case to use the rear ledge as a support and safely support the front weight via the legs.
Mac Pro Video Workstation
This case was designed for the University Of Wisconsin to hold an Apple Mac Pro tower, accessories and rack mounted equipment for a portable video conferencing system. The case features flat panel lids on the front and rear to make accessibility quick and easy.
Pelican 1600 1RU Rack Flypack
This case was designed for Starlight Visuals to hold a custom time code sync clock. The design features a 1RU rack with a removable bottom panel, and a signal and power panel built by the LM Cases Custom Integration department. The rack is held in a Pelican 1600 case with a custom CNC cut foam insert.
Custom Shoulder Pad Cart
This shoulder pad cart was built for Wake Forest University as a locker room storage solution. The cart is built out of 3/4" Baltic Birch plywood and finished with black texture coating. All edges are routed and finished with T Molding. The cart features a long removable pull handle and six 4" Colson casters, the rear two casters are fixed and the front four are 360 degree swiveling.