Products
Craftsman 40” 14 Drawer Griplatch ATA Case
This case was designed for the 40" Craftsman 14 drawer Griplatch tool box. The case is built out of 3/8" plywood and is laminated with black textured fiberglass. The exterior case features deep recessed handles and 4" x 2" Colson locking casters. The case is designed to stack with the 8 Drawer Toolbox to make a full workbox set.
Portable Large Format DIT Workstation
The Portable Large Format DIT Workstation was designed for Angel Valley Media. The LM Cases Custom Integration Dept pre-wired to accept a variety of professional monitors by including Displayport, HDMI and AC Power cables pre installed into the case lid. Power and signal are kept separate; each cable bundle is wrapped in Techflex and finished with heat shrink tubing. All cables are labeled at both ends. The monitor lid is supported by gas springs, which aid in opening the lid and ensuring that it stays open during use. Below the monitors is a dual 4RU rack section, which is primarily designed for preview monitors and any piece of gear less than 6" deep. The rack section is mounted at a 50-degree angle allowing producers to stand behind operators and still have an undistorted view of the rack-mounted components. On each side of the rack section is a bank of 4 USB 3.0 ports with 10' extensions allowing ports from rack-mounted components to be conveniently addressed at the work surface. Also included are 2 duplex AC power outlets with integrated USB charging ports that provide 4 total courtesy USB & power outlets. The dual 4RU rack section features a trap door with 2 recessed vent dishes for quick access to the back of the rack components and USB/power banks. Below the rack section is a 51.75" x 20" pull out work surface, that is made out of 3/4" Baltic Birch and is finished in black texture coating. The work surface features position locks allowing it to be locked into several fixed positions while retracted, this feature is operated by a low profile T-pull handle. Below the retractable work surface are dual 9RU rack sections that include rear rack rail and a rackable depth of 21". The back of rack section is accessed by a removable trap door that features 2 recessed vent dishes and 2 recessed cable hatches. The cable hatches allow cables to be passed through the trap door while it is still closed. The front removable lid features 2 sets of table legs allowing it to be used a massive production table measuring 56.5" x 46". The front lid has 4 slim recessed handles mounted in the sides to aid in removal and moving to its storage location. The exterior case is built of 1/2" plywood and features 6 Colson 4" x 2" casters (3 locking) and 4 deep recessed handles.
Yamaha QL1 Double Wide Workstation
This case was designed for United States Audio Visual. The top work surface of the Yamaha QL1 Double Wide Mixer Workstation features a 15RU angled rack section built out of 1/2" marine grade plastic that holds the console. To the right of the console is a large work surface that can accommodate a small lighting or video controller or provide for a stage manager to call a show. Below the console are two fully shock mounted 14 space racks with rear rack rail and independent rear trap doors. Each rear trap door features a "mouse hole" allowing cables to remain plugged in while the doors are closed. The right rack section features a recessed Hubbell power box that features a power inlet wired to a Hubbell duplex outlet and a Neutrik cat5 jack. The box provides a fully enclosed solution for providing power to the case and supplying a digital snake feed line.
Inline Power Outlet w/Mounting Tabs
This power box is designed to provide an inline 15amp courtsey outlet in the middle of a Powercon run. The box can be used as an extension adapter to combine Powercon cables or provide a outlet at the end of a run.
5 Drawer Production Workbox
The LM Cases 5 drawer workbox is the perfect addition to any mobile production. Designed to fit around 90" & 96" truck packs, the exterior dimensions are 22.5" wide by 30" deep. The workbox features 5 drawers that are built out of 1/2" Baltic birch and joined via interlocking dove tails. The drawers are finished with black texture coating. All drawers feature recessed handles and are mounted on HD Accuride drawer glides.
Camera Controller Flypack Workstation
This case was designed for Novartis Pharmaceuticals and integrated by the Whitlock Group as part of a 3 case portable system that is designed to travel between buildings on their campus. This case is designed to compliment the main A/V control unit (more info on that case can be found HERE) by offering a independent camera control station. This case is designed to have the same depth and height as the main workstation allowing the two cases to have a similar esthetic and flow when working next to each other.
55” Confidence Monitor Case
This case was designed for Novartis Pharmaceuticals and integrated by the Whitlock group as part of a 3 case system to use on the Novartis campus. The case features a 55" monitor mounted in a custom enclosure to hold the monitor at a fixed angle for "confidence monitor" applications. The enclosure is built out of 3/4" Baltic Birch plywood and features top & bottom mounted vents, rear access door and VESA pattern holes for mounting the monitor. Custom CNC cut foam cradles were created to provide additional support at the bottom of the monitor.
Portable Audio/Video Workstation Road Case
This case was designed for Novartis Pharmaceuticals and integrated by the Whitlock Group as part of a 3 case portable system that is designed to travel between buildings ontheir campus. This case is the central piece of the system holding the mixer, video switcher, preview monitors and rack mounted components.
Apple Mac Pro Media Server Kit
This case was designed to hold a 2014 Apple MacPro and non rack mounted components in a simple 6RU package held in a Storm Case. The MacPro is held in a custom mount designed to shock mount the computer within the rack, more on the mount can be found HERE.
2014 Apple Mac Pro Mount Kit
The LM Cases mount is designed to hold the new cylindrical Apple Mac Pro tower introduced in late 2013. The kit is designed to fully shock isolated the computer allowing it to be mounted in non shock mounted mobile racks, shelves and drawers.
Shure ULXD4Q 4 Channel Wireless System Case
This case was designed for Starway Productions to hold their 4 Channel Shure ULXD4Q wireless microphone system. The 1RU receiver is held in a 1/2" Baltic Birch inner rack shell that is finished with black texture coating. All system components are held in a custom CNC cut foam insert: each hand held mic has its own compartment while the lav beltbacks are stored in joining compartments that allow their antennas to share the same space while keeping the packs isolated. There are also individual compartments for each battery and the systems antenna's. The entire system is held in a Pelican 1610 waterproof case.
Electro Voice R-300 Wireless System Case
This case was designed to hold four Electro Voice R-300 wireless systems compromised of receivers, hand held microphones, lavaliere microphones, batteries and cables. All components are held in a custom CNC cut foam insert.
Mobile Presentation LCD Monitor Lift Case
This case was designed around a Sharp LC-70LE650U 70" LCD monitor for use in mobile presentations around a college campus. The case is designed to be operated by one person, all lids; including the main top lid is hinged removing the need for a technician to ask for help during set up and tear down. Because the top lid is large, gas springs were installed to assist with opening and closing. The gas springs also provide an extra level of safety to ensure the lid remains open during use. The monitor raises from the case on an electrically powered lift, all input and output connections on the monitor are relocated to a panel on the side of the case which prevents the need to reach up to the monitor once its in the air. All cables connected to the panel are wrapped into a single neat bundle that travels up and down with the monitor, this provides a very neat and pleasing visual esthetic.
Portable Tricaster TV Production Flypack
This case was built for Creative Live as the video portion of a portable audio & video mobile rig, CLICK HERE to see the matcing audio case.The case features a slide out shelf for a NewTek Tricaster TCXD855 control surface with a video monitor mounted in the lid above the console. The lid features 3 large barn doors to keep the glare down as well as prevent light pollution from the monitor on dark sets. Below the mixer section is a 16 space rack section and 4 drawers.
Presonus 24.4.2. Audio Flypack Workstation
This case was built for Creative Live as the audio portion of a portable audio & video mobile rig, CLICK HERE to see the matching video case. The case features a rack mount section for the Presonus StudioLive 24.4.2 with a video monitor mounted in the lid above the console. The lid features 3 large barn doors to keep the glare down as well as prevent light pollution from the monitor on dark sets. Below the mixer section is a 16 space rack section and 4 drawers.