Products
3000w Rack Mounted US To EU Power Converter Box
This power conversion box is designed to be a main power input for touring systems that travel between the US and EU. The box is split into two independent sides:
San Diego State Side Line Helmet Repair Tech Work Box
This trunk was built for San Diego State University. The trunk is designed to provide a mobile tool station to be used on a football sideline.
Tennessee Titans Athletic Trainer’s Sideline Trunk
This trunk was designed for the Tennessee Titans football athletic training department. The trunk is designed as trunk for general storage. The trunk features 4 drawers built into an isolated inner shell that separates them from the exterior case. Each drawer is built out of ½” Baltic Birch plywood and is mounted on HD Accuride glides.
Tennessee Titans Athletic Trainers Storage Trunk
This trunk was designed for the Tennessee Titans football athletic training department. The trunk is designed as a trunk for general storage. The trunk features 5 drawers. Each drawer is built from ½” Baltic Birch plywood and mounted on HD Accuride drawer glides. The top left 2 drawers each feature 4 compartments with removable ½” marine grade black plastic dividers. Each compartment is 4” wide x 21.5” deep x 7” tall. The middle third drawer is split into quadrants. Each quadrant measures 8.625” wide x 10.375” deep x 13” tall. The bottom 2 drawers are split into 16 compartments each with removable dividers. When the drawer is configured into 16 compartments; each compartment measures: 4” wide x 5” deep x 13” tall.
Midas M32R 3 Piece Lid Mixing Console Case
This case is designed to hold a Midas M32R mixing console. The three piece design allows the console to be used in the case bottom tray with the top, and nose lids being removable. The exterior features 8 deep recessed handles. A handle is located in the case caster pad to help move it when on a table top or EZ Tilt. The case exterior is built from 3/8” plywood laminated with your choice of ABS laminate color. The case rides on 4” Colson casters and features a full ¾” thick birch wheel pad.
Chauvet Intimidator 350 LED - 8 Pack Road Case
This case was designed to hold 8 Chauvet Intimidator 350 LED light fixtures. Each fixture is held in an individual compartment in a CNC cut foam insert. 6” of space is allowed above each fixture base to accommodate clamps mounted to the fixture. 2 removable trays are provided above the fixtures for storage. The case exterior is 48” wide x 24” deep, and rides on 4” Colson casters.
Installed Yamaha QL5 Mixing Console Work Station Desk
This case was built for a church to provide a front of house work station to hold their Yamaha QL5 mixer, and provide storage for production equipment.
LM Tour Systems D 3/1 L21-30 3 Phase Rack Mount Power Distro w/Edison Outlets
The LM Tour Systems D 3/1 is a compact 2U rack-mount three-phase power distribution unit designed to provide a high density of standard Edison outlets from a 30-amp L21-30 power source. Wired in a Wye configuration, the unit splits incoming three-phase power into X, Y, and Z circuits protected by individual 20-amp breakers. It features eight rear duplex outlets, a front courtesy outlet with a dedicated 15-amp breaker, and a looped L21-30 output for linking additional distros. The rugged chassis is built from black anodized aluminum with laser-etched labeling, making it a durable and reliable solution for touring racks and production systems that require multiple Edison outlets from a three-phase source.
19 Pin - 6 Circuit Socapex / Neutrik True Rack Mount Break Out Box
This power distro box is designed to take 6 circuits via Socapex and distribute them into 12 Neutrik True jacks. Each of the 6 circuits are split A & B allowing 2 outlets per circuit. Each circuit is labeled with its corresponding Socapex pin numbers allowing easy troubleshooting. The box is built around a .125” thick front panel plate with a fully enclosed rear box.
Black Magic ATEM / iMac Production Flypack
This case was built for Plum Precision as a portable video fly pack production case. The system is based around two 21” iMac computers and a Black Magic ATEM production studio. The case features a large sliding work surface allowing users to sit comfortably during shows. The work surface is ergonomically mounted to provide a standard working desk height. Built out of ¾” Baltic Birch plywood finished with black texture coating, the work surface features a remote cable locking latch system that allows the surface to be extended and locked into 25 positions.
Mallinckrodt DSir Medical Device Transport Case
This case was built for Mallinckrodt Pharmaceuticals to hold their DSir MRI unit. The case design allows the device to simply be rolled into the case and locked into place without the need for additional packaging materials. The case was designed to exceed the ISTA 1B shipping certification. The case was tested by an independent testing facility to ensure that the build methods would exceed this packaging standard and protect the DSir against any shipping scenario.
Digital Projection HIGHlite Laser II 3D Projector Case
This case was built for AVI-SPL to hold a Digital Projection HIGHlite Laser II 3D projector. The case is designed to hold the projector in a custom CNC cut foam compartment. The projector is surrounded by a minimum of 2” of foam on all sides. The projector stores with the main lens attached. A second lens is stored in a custom cut compartment in the accessory area. The secondary lens compartment features a custom contoured CNC cut foam compartment with a removable lid.
Custom 5 Piece Drum Kit Tour Case
This case was built for Elevate Life Church to transport their drum kit for tours and for portable church services. The case features storage for a complete 5-piece drum set with storage for a plexi-glass drum shield at the top. The drum set is a rock style kit with a 24” kick drum, 12” rack tom, 16” floor tom, and 18” floor tom.
Custom Speakon/RF Output Panel
This panel was designed for Briarcrest Christian School to provide a central location for their amplifier and RF antennae outputs. The panel features 2 NL4 outputs allowing the left and right speakers to be run down a single cable run. Each connector is labeled using simple terms allowing students to use the panel without confusion. The Speakon connectors are also labeled with the pin out to help with troubleshooting. Dual XLR’s are provided for a record feed. BNC’s are provided to send signal to the separate antennae needed for microphones and IEM’s. Two Cat5 jacks are spec’d for network input/output.
Sony RCP1500 Sliding Rack Mount Fly Pack Shelf
This sliding shelf is designed to hold 3 Sony RCP1500 camera controllers in a rack mount format. The shelf features a multi-position locking latch system that allows the shelf to be extended and locked into 14 positions of extension by pulling the front T handle. The shelf also features a padded palm rest at the front below the controllers. The shelf requires mounting to the front and rear rack rails of a rack case. The minimum rail to rail depth is 20”.