Products
Meyer MJF208 Speaker Case 2 Capacity
This case is designed to hold 2 Meyer MJF 208 monitors. The speakers are held in a custom CNC cut 3” bottom foam insert that contours their shape. The top of the bottom foam insert features a ¼” black marine grade plastic top cap to prevent the foam from tearing as speakers are loaded and unloaded.
Chauvet Rogue R1 Beam Wash Road Case
This case is designed for the Chauvet Rogue R1 Beam Wash fixture. 6 lights are held in a custom CNC cut, PE foam insert. The insert allows spacing for clamps to remain attached to each light. The case is built from 3/8” plywood laminated with Hexagrip exterior finish. The exterior features 4 deep recessed handles, stacking caster wells in the lid, and recessed lid stays. The case rides on 4” casters mounted to a full sized ¾” plywood caster board.
Roland V-160HD Compact Switcher Flypack
This compact flypack is designed for the Roland V-160 HD Switcher. The switcher is mounted via its rack ears to 5U of angled rack rail. The rack rail is mounted on rubber isolation mounts to provide shock protection during transport. A ½” black, marine grade plastic hinged decorative cover is mounted behind the switcher to hide cables. 2 small cable hatches are provided to handle cables coming into and out of the case. The case lid features pre-drilled holes in the 100mm VESA configuration for a user mounted monitor.
Chauvet Maverick Storm 1 Wash Case
This case is designed to hold 2 Chauvet Maverick Storm 1 Wash light fixtures in custom cut PE foam inserts. The case design allows clamps to remain attached to the fixtures for easy deployment. The case exterior is built from 3/8” plywood laminated with your choice of ABS plastic colors. The case rides on 4” casters with a full sized ¾” caster board. The exterior features recessed lid stays to ensure the lid remains open during loading and unloading. 2 deep recessed handles are provided.
Touring Production Managers Workstation
This mobile production managers workstation was built for Dan Mercer who is currently on tour with the Backstreet Boys. The workstation road case is designed to be an all in inclusive office for life on the road.
Analog Way RS1 Video Processor Pocket Door Rack w/Custom LED Logo Lights
This case was built for Paradise Productions for their Analog Way RS1 video processing system. The case features a 10u rack section, 2 drawers, pocket doors and custom routed LED lights of the Paradise Productions logo.
1RU 12v Power Supply For RGB LED Lights
This is our custom built, 1U rack mounted power supply for 12v RGB LED light systems that we install here at LM cases. The chassis allows systems to easily be powered on/off via a front mounted switch. It also converts the 12v power and RGB blending voltages into a 4 pin XLR format for a more durable connection.
Buffalo Bills Low Profile Athletic Trainers Trunk
This custom athletic trainer’s trunk was designed for the Buffalo Bills. The trunk is designed to hold groups of smaller items in a low-profile format that fits in a bus bay.
Benson Monarch Reverb 1x12 Amp Road Case
This custom case is designed for the Benson Monarch Reverb guitar amplifier. The case interior is lined with 1” PE foam, with 3” PE foam under the amp. A 2.5” accessory compartment is located underneath the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Custom Portable Vodka Bar Shipping Case
This case was built for Studio 46 media as a gift for their client. The case features a custom CNC cut foam insert that holds bottles of Grey Goose and Titos vodka with 6 custom etched glasses.
Allen & Heath S5000 Tour Grade Road Case
This heavy-duty flight case was built for ADI for their Allen & Heath S5000 control surface. The surface is held in place during transport via custom CNC cut, non-abrasive, Crosslink foam side blocks. These side blocks match the console’s contours and shape, these prevent it from sliding during transport and loading on console stands. To further keep the console in place, a ¼” marine grade plastic locator is provided to trap the console by its feet to ensure proper mating to the lid foam blocks and doghouse.
Barco EC-50 Event Controller Case
This case was designed for Panavid to hold their Barco EC-50 event controller. The event controller is held in a 2” PE foam lined compartment. A 12” x 10” accessory compartment is included under the controller. 3” inboard dolly casters are provided for easy transport. These casters are designed to be field replaceable with simple 10/32” screws.
Barco TLD+ 7.5-11 R9829997 Projector Lens Case
This case is designed to hold a Barco TLD+ 7.5-11 (R9829997) projector lens. The case features custom PE foam cradles that hold the lens at each end. Crosslink foam is provided at the glass ends of the lens. The non-abrasive Crosslink foam removes the need to provide caps with the lens. The case exterior is built from ¼” plywood laminated with charcoal ABS plastic and features Panavid’s silkscreen and ID stencils to show the lens make and model. The case features flat triangle corners allowing it to be placed in a cardboard box easily for shipment.
NPDU Network Power Distribution Unit
This custom rack mounted power distribution is designed with network racks in mind. The 2RU, 6” deep chassis is built from .125” thick brushed aluminum that is black anodized.
90” Tech Utility Trunk w/Removable Trays
This utility trunk is designed with production companies in mind! The trunk features 2 removable trays. 1 tray features 10 movable ¼” marine grade plastic dividers perfect for small parts like format converters, direct boxes, and patch cables. The second open tray is designed for larger items like microphones in factory boxes. The bottom compartment under the trays is perfect for mic stands and cables.