Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 16-1143
6 Drawer Craftsman Tool Chest w/Tour Grade Flight Case
This heavy-duty portable tool chest built by LM Cases is designed for technicians and mobile production environments that demand durability, organization, and integrated power in a single system.
At its core is a Craftsman® 6-drawer tool chest, providing secure, high-capacity storage for tools, parts, and essential gear. A gas spring-assisted lid opens to reveal a protected work surface, transforming the case into a functional mobile workstation on-site.
Integrated directly into the work surface are 6 AC outlets and 2 USB-A charging ports, allowing you to power tools, charge devices, and stay operational without additional setup.
Power is delivered through an LM Tour Systems DSK-I inlet box, featuring a locking Neutrik True1® power inlet and a courtesy True1® power output for looping power to additional equipment. A 25ft heavy-duty LM Tour Systems True1 power cable is included, making this system ready to deploy immediately.
The exterior case is constructed from 3/8” plywood laminated with your choice of ABS finish, delivering the strength required for touring and industrial use. Eight deep recessed handles ensure safe and balanced lifting, while 4” Colson casters (two locking) provide smooth mobility across a variety of surfaces.
Don’t forget to add a LM Tour Systems 4-Plex True1 outlet bank to complement the DSK-I inlet box!
- REFERENCE: 16-1143
- CATEGORY: Audio/Visual CATEGORY: Sports CATEGORY: Trade Show/Exhibit CATEGORY: Custom Integration
Related Products
Large Format Tour Workbox For Projector Storage
This custom LM Cases workbox was built for the Atlanta Falcons as part of a portable touring office designed for professional football game day operations. The case features eight heavy-duty drawers in a protected “case within a case” design, including custom foam-lined compartments for multiple projectors and organized storage for cables and support equipment. Built to standard truck pack dimensions with under-bus clearance, the rugged ABS-laminated exterior, branded graphics, and heavy-duty caster system ensure safe transport in demanding touring environments.
Portable Production Office Workbox w/Laminator Storage
This custom touring office workbox by LM Cases was built for the Atlanta Falcons to transport office equipment as part of a portable football operations setup. Designed to fit truck pack dimensions and under a tour bus, the case features a shock-isolated drawer system with configurable storage, a dedicated laminator compartment, and an integrated pop-up work table. The rugged ABS-laminated exterior, heavy-duty hardware, and locking casters make it ideal for demanding travel environments.
Computer Workbox w/Extended Top Work Surface
This custom computer workbox was built for the US Army Field Band and features a 12U shock-mounted rack, heavy-duty drawers, lid storage, and a removable table that expands the workspace between the case body and front lid.
The rack section is isolated with 1” foam and provides 25” rail-to-rail depth. It includes LM Tour Systems power distribution, with a recessed power inlet, duplex outlets, a DSK-SM module, Powercon connectivity, and a 25 ft power cable for reliable power management.
Below the rack are two heavy-duty drawers made from ½” Baltic Birch with Accuride glides and black textured coating. The top drawer offers 4.5” height, while the bottom drawer provides 6.5” height and includes two removable dividers for organization.
The front lid features Rip-Ties for cable storage, two bottle shelves, and a removable table that connects the lid to the case to create a large integrated work surface.
The case exterior is constructed from 3/8” plywood laminated with black ABS, finished with six recessed handles, 4” Colson casters, and a “US ARMY FIELD BAND” stencil for durability and identification.
Tour Managers Workbox w/Walnut Drawer Faces & Printer
This custom tour manager workbox built by LM Cases for Do Good Management is designed to securely store office supplies and a printer in a compact, mobile format. The case features a hinged printer compartment with a dry erase whiteboard lid, a locking slide-out printer shelf, integrated power and network connectivity, and seven heavy-duty drawers with solid walnut fronts. Built from durable plywood with black ABS laminate and mounted on eight 4” casters, the workbox is engineered for reliable touring and day-to-day production use.
Custom Installed Solid Walnut Conference Room Workbox
This custom furniture-grade equipment case was designed to store wireless microphones, belt packs, and communication devices in a conference room installation while blending into a professional interior environment.
Constructed from solid walnut with dovetail joints, the case matches the size of a 16-space studio rack for coordinated installations. It includes four drawers: one for Shure ULXD handheld microphones, one with adjustable dividers for accessories, one with foam for Clear-Com belt packs, and one for Shure rechargeable batteries.
The case also features rack spaces for additional equipment, with a 1U section on top and a 2U section below, along with rear rack rails concealed by a walnut panel. Recessed handles and locking casters provide discreet mobility.
5 Drawer Workbox w/LED Lighting In Each Drawer
This custom 5-drawer workbox was built for Helsinki Pro Audio systems engineer Vile to organize tools and accessories at the front-of-house (FOH) position.
The case includes five Baltic Birch drawers mounted on heavy-duty glides, each carpet-lined and isolated from the exterior by foam for protection. Every drawer features custom color-changing LED lighting that can be disconnected via XLR connections if the drawers need to be removed.
The top drawer includes a True1 power outlet and a 4-plex outlet bank, powered by an integrated LM Tour Systems power supply and a 25 ft True1 power cable.
Constructed from ABS-laminated plywood, the case features multiple recessed handles for lifting and pulling, 4” casters for mobility, and stacking caster wells that allow another case to be securely stacked on top.
Yamaha TF1 Installed FOH Workstation
This custom installed workstation was built to house a Yamaha TF1 mixing console for a front-of-house (FOH) church application.
Constructed from ¾” Baltic Birch with a black textured finish, the workstation includes a custom-fitted console compartment with ventilation and marine-grade brackets to secure the console in place. A 16U rack section provides additional space for audio equipment and features a sliding pocket door in the front and a vented rear lid.
Power and signal connections are managed through an LM Tour Systems inlet panel with Powercon and configurable D-series connector ports. The case is finished with recessed hardware and 4” Colson casters, creating a durable and mobile solution for installed audio systems.
Small Format Event Tech Workbox For Loyola University
This custom mobile workbox was built for the Event Services department at Loyola University to provide a portable workstation for event setup and operations.
The case features integrated LED lighting, AC power outlets with plug-lock protection, and USB charging ports in the lid. The main work surface is Formica-laminated, and the lid includes a pop-up table for additional workspace.
Inside the case are multiple carpet-lined Baltic Birch drawers mounted on heavy-duty glides and isolated from the exterior for added protection.
Constructed from ABS-laminated plywood, the case includes recessed handles, 4” Colson casters, and Loyola Event Services branding, creating a durable and mobile workstation for event staff.
Large Format Touring Production Workstation
This custom production workstation was built for All Of It Now as a wide, mobile backstage storage and operations solution.
The workstation features a large Formica-laminated work surface with a center-mounted monitor bracket and an integrated LM Tour Systems power module providing multiple AC outlets, USB charging ports, and Powercon connections.
Below the work surface are nine heavy-duty Baltic Birch drawers with removable marine-grade plastic dividers, allowing flexible organization for tools, accessories, and production gear.
Constructed from ABS-laminated plywood, the case includes recessed handles, heavy-duty Colson casters, and custom branding, creating a durable and mobile workstation for backstage production environments.
Event Technicians Workbox
This custom workbox was built for Panavid as a mobile storage solution for audio-visual production accessories and tools.
The case includes seven heavy-duty drawers with varying heights for organized storage. The top drawers feature adjustable Tech Dividers made from marine-grade plastic, allowing compartments to be reconfigured in small increments, while the lower drawers provide open storage for larger items.
The hinged lid contains five additional compartments with clear Lexan fronts, each divided for small parts, plus a larger storage area for items like tape or aerosol cans.
Constructed from ABS-laminated plywood, the case features recessed hardware, a combination locking latch, custom Panavid branding, and 4” Colson casters, creating a durable and mobile storage system for production environments.
New York Jets Custom Sideline Workbox
The case is designed for the New York Jets equipment management staff to be a mobile sideline workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x8 grid of pegboard mounted SmartJars that provide 64 individual storage compartments for small parts. The lid also features 12 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
BYU Athletic Trainer’s Workbox
This custom indoor athletic trainer’s trunk was built for the Brigham Young University football team. The trunk is designed to be a mobile workstation for the team’s athletic trainers stored indoors during games.
KC Chiefs Modalities Workbox
This custom modality trunk was built for the Kansas City Chiefs. The custom workbox is designed to hold various items needed by the team when they are on the road.
Custom Workbox w/Clear Drawers & LED Backlighting
This custom workbox was built for Imagination America. The custom 14 drawer workbox features stunning clear Lexan drawers with LED back lighting.
QSC Q-Sys System Tech Workstation
This case was designed for Walt Disney Parks as a PA system tech workstation. The case is based around a QSC Q-Sys system. The workstation includes a Dell 24” touch monitor, Formica laminated work surface, shock mounted rack section, custom IO panel and storage drawers.
Studio Control Room Storage Rack/Workbox - 6U Solid Walnut
The studio control room storage rack is designed to hold rack mount equipment and peripherals in a decorative unit for installed applications. The rack is perfect for home studios, conference rooms and houses of worship where a high quality, aesthetically pleasing storage solution is required.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
6 Drawer Video Workbox
This video tech workbox was built for Kelson Productions in NYC. The custom built workbox features 6 heavy duty drawers, 3 of which have configurable dividers.
5 Drawer Workbox w/270 Degree Fold Flat Front Hinged Lid
This custom 5 drawer workbox was built for IKO Productions. The case features an OD of 24” x 30” with a 270 degree fold flat front door.
6 Drawer Sideline Window Trunk
This 6-drawer sideline window drawer trunk was designed for West Virginia Football. The trunk features 6 equally sized drawers with interior dimensions of 10.875” wide x 22” deep x 12” tall. Each drawer is built from ½” Baltic Birch plywood, finished with black texture coating and mounted on HD Accuride glides.