Products
Game Day Jersey / Pant Trunk
This custom coach’s trunk was built for Little Rock Parkview High School. The trunk is designed to hold hanging uniforms and clothes with removable tub storage below for undergarments.
UC Davis Athletic Trainers Work Station
This trunk was designed for the University Of California, Davis athletic trainers dept. The trunk is designed to be a portable, all in one workstation.
Portable Entertainment Center Case w/16U Rack Section
This case is designed to be a portable entertainment system for tours, churches, and production companies. The case can be fully integrated by the LM Cases Custom Integration department or delivered empty for integration to be handled by the end user. The design allows for easy access to the monitor and equipment mounted in the rack section.
3 Monitor Video Flypack w/Slide Out Work Surface
This case was built as a video presentation hub for corporate shows. The case features 2 – 27” iMac computers, a 32” multi-view monitor, custom IO panels, slide out work surface, and an equipment rack.
Triple Wide Pocket Door Rack w/Modular Rack Shell Storage
This triple wide rack transport case was designed to hold 5 – 6RU modular rack shells, in addition to 2 built in 18RU rack frames and a storage drawer. The front of the case features 3 pocket doors and 2 large doors that fold flat against the sides of the case during use.
Apple iPad/iPhone Lightning Rack Mount Charging Enclosure 3RU 8 Capacity
This rack mountable 3RU enclosure is designed to provide storage and charging for 8 devices within a rack. The enclosure is built from .125” black anodized aluminum. The device storage section features a carpet lined bottom.
Roland DJ707M USB Controller Road Case
This case is designed for the Roland DJ-707M Serato DJ Controller. The case features a pull over lid allowing the controller to remain the case tray during a performance. An accessory compartment is provided under the controller for the power cable and other misc items. The case exterior is built from ¼” plywood laminated with your choice of ABS colors. The case hardware includes 2 recessed latches, a slim line recessed handle, and medium ball corners.
1:3 L5-30 Power Distribution 2RU Enclosure
This 1:3 L5-30 splitter panel is designed to take a single L5-30 input and distribute power to 3 L5-30 outlets. This distribution box is perfect for server racks that need to split input power to multiple PDUs or uninterruptable battery backups. The front HBL2615 inlet features a LED light to show when power is present. 3 HBL2616 outlets are provided for power output. The front face panel is built from HD .125” thick black anodized aluminum. The panel is 2U tall, with a 6” deep back box. Add a LM Tour Systems L5-30 custom built power cable to your enclosure for a turn key system!
Road Case For Shure SM7b Microphone
This case is designed to hold the Shure SM7b microphone, and large A7WS windscreen. The custom CNC cut PE foam interior is designed to hold the microphone with the RK345 windscreen attached. The case exterior is built from custom bent aluminum extrusion. The aluminum extrusion has built in tongue and groove to ensure strong alignment between the lid and case body. ¼” plywood panels laminated with your choice of ABS plastic colors make up the case top and bottom. A HD spring loaded handle allows for easy transport.
4 Space Studio Outboard Rack 18” Deep Shell
This rack is designed to be the perfect compliment to your studio for holding interfaces, and outboard that you would like prominently displayed. It is built out of 1/2” Baltic Birch, and features beautifully dove-tailed end joints; all edges are rounded and the rack is finished with a light coating of clear lacquer. The rack features front and rear pre-tapped 10/32” rack rail that allows for 16.5” of rackable depth for equipment. All hardware and fasteners are finished in black for a sharp contrast to the Birch finish, the rack also features rubber feet for added stability.
DSK-AC Courtesy Power / USB Outlet Recessed Box
This outlet box is designed to provide courtesy AC and or USB power to work surfaces. The box can be recessed into a work surface, drawer or panel. The box is built from .125” black anodized aluminum. Power is provided by 16/3 HD SO power cable that is custom cut to your specification and terminated with a HD Edison AC plug. A custom heat shrink label is provided with the text of your choosing. 5 outlet options are available: 20amp HD duplex, 4 USB A outlet bank, duplex w/dual USB A, duplex w/dual USB C, and a duplex w/USB A & C.
Digico S31 Console Road Case With Doghouse
This case is designed to hold the Digico S31 console. The console is held in place via custom foam blocks. Crosslink foam blocks contour the shape of the console’s built-in monitors. The case exterior is built from 3/8” plywood laminated with your choice of ABS colors. The case rides on 4” Colson casters and features 10 deep recessed handles.
GrandMA3 Light Console Road Case
This case is designed for the MA Lighting GrandMA 3 Light console. The console is held in a custom CNC cut; PE foam lined interior. Custom arch shapes are cut into the foam to protect the console’s screen hinges. A custom ½” marine grade plastic keyboard drawer is provided under the console for additional storage.
Waterproof Transport Case For Cisco WebEx DX80
This case is designed to hold the Cisco WebEx DX80. The case features a custom CNC cut PE foam insert that holds the unit. A custom cutout is provided for the external mounted camera. Cutouts are also provided to accommodate the DX80’s stand allowing it to remain attached during transport. A 15” x 5” accessory compartment is provided for additional storage.
Vinten Vector 750 Pan/Tilt Head Road Case
This case is designed to hold a Vinten Vector 750 camera head. The camera head is held in a custom CNC cut, PE foam insert that is designed to contour and support the unit. The case is designed with broadcast truck packs in mind; ½” marine grade plastic is positioned at all high stress internal points allowing the case to be flipped. The foam insert includes 1.625”, and 1.125” diameter holes for arms.