Products
Shure® ULX-D 8 Capacity Hand Held Rack Drawer
This drawer is designed to fit 8 Shure ULX-D Hand held mics. Each compartment is sized to fit all Shure capsules. An accessory compartment is included for general storage. The CNC cut foam insert is glued into a 2RU 18” deep HD rack drawer. The rack drawer features a key lock for security.
ClearCom® HelixNet® 16 Capacity Belt Pack Drawer 3RU
This drawer is designed to hold 16 ClearCom® HelixNet® belt packs. Each belt pack is held in a custom CNC cut compartment. The foam insert is constructed out of PE foam. The insert is installed into a HD 3RU, 18” deep rack drawer.
Clearcom FreeSpeak II 5 Capacity 3RU Rack Drawer
This drawer is designed to hold 5 ClearCom FreeSpeak® belt packs, a ClearCom AC60 charger and batteries. An accessory compartment is included for misc. items. The PE foam insert is custom cut for each item. The foam insert is glued into the drawer.
D1 Power Distribution Box
The LM Tour Systems D1 power distribution box is designed to be a central power hub for mobile racks and integrated systems. Power is introduced to the box via the front Powercon connector. A blue status LED shows when power is present. The 20amp hydraulic master breaker provides control over all outlets and can serve as an on/off switch for systems. A front mounted Powercon loop outlet is provided for linking systems together. This outlet is configured post breaker. A front mounted courtesy duplex is provided with a dedicated 5-amp breaker. The rear of the unit features 3 duplex outlets for a total of 6 outlets in a close proximity configuration. A spaced Edison outlet is provided for larger “wall wart” style plugs that render plugs in a duplex configuration un-usable. An additional rear Powercon® outlet with a blue status light is provided for linking additional items. The D1 can be rack mounted from the front or rear via the removable ears. The unit features rounded front and rear face pieces for a streamlined look when using the unit without its ears attached in a stage box configuration.
2020 Amenities Case - Executive Elite
This case is designed to be a fully integrated craft services unit. The case features a bold wood grain laminate that emulates bourbon barrels. The case will stand out in any green room, office, or lobby. The case features a 4.5 cu. ft refrigerator, microwave, commercial grade Keurig®, grill, and Sonos® sound system. The case comes fully integrated with all items shown.
Compact Mobile Hospitality & Beverage Road Case with Fridge, Keurig & USB Power
This case is designed to be a fully integrated craft services unit. The case features a bold wood grain laminate that emulates bourbon barrels. The case will stand out in any green room, office, or lobby. The case features a 115 can refrigerator. The refrigerator features a digital temperature display, LED lighting, wire racks, and a glass display door. A commercial grade Keurig® is mounted on a slide out shelf. The Keurig® is held in place with a custom CNC cut piece of marine grade plastic to prevent movement during transport. A 20 capacity display rack is located next to the Keurig® to provide quick access to K-Cups. A LM Tour Systems power distribution unit is located above the Keurig®. This power distribution unit provides 8 Edison outlets, 8 high powered USB outlets and two Powercon outlets for expansion. 3 HD drawers are provided for storage. Each drawer is built out of ½” Baltic birch plywood and is laminated on the interior & exterior.
MA Lighting GrandMA 3 Compact Lighting Console Case
This case was built for Crossfade Design for their MA Lighting GrandMA 3 console. The console is held in a custom 2” PE lined compartment. Custom CNC cut Crosslink foam blocks hold the console at its palm rest and back. Holes are routed into the bottom foam to hold the console by its feet ensuring that it is always properly located in the case tray.
Coaches Wardrobe Trunk, 18 Capacity With USB Charging Drawer
This trunk was built for Penn State University for coaches who need to dress from the same wardrobe case. The case features a large hanging clothes section with a HD hanging bar. The clothes section features a trap door on the side allowing users to throw dirty clothes in the side of the closed case at the end of an event. Clothes are contained in the hanging section by a heavy duty ¾” thick clear Lexan door. Below the hanging section are 2 heavy duty drawers for storage of socks and undergarments. The left side of the case features 18 storage compartments for folded clothes and shoes. A charging drawer for 10 devices is provided for storage and charging during events. The drawer’s USB outlets are rated to charge most devices including tablets. Power to the case is provided by a retractable 30ft spring loaded power cable on an enclosed reel. The retractable cable allows the case to be easily powered without the need to carry a separate power cable.
Backstreet Boys Touring Costume Wardrobe Trunk
This case was built to hold costumes for the Backstreet Boys world tour. The case features 2 hanging clothes sections and a storage drawer. The hanging clothes sections each feature a HD aluminum bar for hangers. The bar can be adjusted in 3 positions front to back to accommodate a variety of hangers. The heavy duty storage drawer is built out of ½” Baltic Birch and mounted on HD Accuride glides. The hanging clothes sections and drawer are finished with wood grain laminate.
Portable Game Film Trunk With 60” TV
This case was built for West Memphis High School for portable game films. The case features a 60” monitor installed on a HD tour grade electric lift. The lift is controlled with a hardwired remote control that can either be used in the case or handheld. The monitor is wired to a custom IO box that features Neutrik® HDMI and Cat5 jacks. A recessed Hubbell power inlet is the main input source of power. A 25’ 12awg HD extra hard usage power cable is included.
2RU USB/Edison/Powercon® Power Distribution Unit
This power box is designed to provide 8 courtesy Edison and USB outlets to a work surface or rack. The power box also includes 2 Powercon® output jacks for expansion. Common uses for this box include tech work stations where a variety of power outlets are required. The box is constructed out of 1/8” brushed aluminum that is anodized black. Power is supplied via a 3’ HD SOOW cable terminated with a Hubbell Edison plug.
University Of Nebraska Sports Nutrition Trunk With 50 Quart Cooler
This trunk was designed for the University Of Nebraska Performance Nutrition department. The trunk features a magnetic dry erase white board, and a cork board in the trunk lid. Divided compartments built out of ½” marine grade plastic are located at an ergonomic working height. These compartments are designed to hold food and energy bars for distribution to athletes and staff. 18 total compartments are provided. 4 heavy duty drawers are provided for storage. These drawers are built out of ½” Baltic birch plywood, mounted on HD Accuride glides and finished with black texture coating. A storage cabinet is located at the bottom left corner of the trunk. The cabinet features a removable shelf that can be placed in 2 locations for flexible storage. A 50qt Pelican Elite cooler is also included to keep food cold during transport.
10 Drawer Large Format Production Workbox Case
This workbox was designed for the BackStreet Boys wardrobe department. The workbox features 10 drawers. Each drawer is built out of ½” Baltic Birch plywood, mounted on HD Accuride glides, and finished with black texture coating. A storage compartment is located above the top drawer in each section. The compartment is sealed with a removable ½” Marine Grade plastic lid. The drawers are built into a ½” plywood shell that is independent from the external case.
Snap Attack® / Aerial Attack® Transport Trunk
This case is designed to hold either a Snap Attack®, or Aerial Attack® machine. The stock case comes standard with a Sports Attack® brand universal mount post installed. The user has the option to mount their existing machine to the case, or have LM Cases provide the machine for a turn key system. The case features split top lids that fold down to the left and right side of the trunk. Cargo nets are installed allowing footballs to be stored in the folded down lids during use. A slide out shelf built out of HD marine grade plastic is included to store a generator or the upgraded power cable reel. A gas powered generator is option is offered by LM Cases if you desire a turn key system. The case comes standard with a 50’ retractable power cable. This power cable is spring loaded allowing the cable to be quickly extended and retracted. An optional 125’ HD power cable mounted on a HD steel reel is offered for users who require additional length. The upgraded power option featured a 14awg hard usage outdoor rated power cable on an industrial strength steel reel. The trunk features 2 accessory compartments located below the main work surface. These accessory compartments are large enough to store the factory tripod that comes standard with the machine, allowing all factory parts to be stored with the machine at all times.
Chauvet Rogue R1 Wash Case - 6 Capacity
This case is designed to hold 6 Chauvet Rogue R1 fixtures in a custom CNC cut foam insert. Each fixture is stored lens facing down. The foam securely contours the shape of each fixture allowing safe travel even if the case is flipped. A 5.5” deep x 43.5” wide x 12.5” tall carpet lined accessory compartment is included to hold clamps, power, and safety cables. The case features 4” Colson casters (2 locking), 4 deep recessed handles, stacking caster wells, and recessed lid stays. The case is designed around a 90” truck pack with OD dimensions of 45” x 30”.