Products
Dual 15amp Powercon Input Panel
This is a perfect power input panel for systems requiring dual 15amp power inputs from separate sources, the panel can also be beneficial as a master power switch for 2 separate systems when utilizing the breakers as “on/off” switches. Power enters the panel via the Powercon jack and is routed through the breaker then to 2 duplex outlets. The 20amp breaker protects the system from over drawing and or power surges.
The rack chassis is built out of thick .125” brushed aluminum and black anodized. All labels are laser etched.
Lawo MC36 Console Case
This case was designed for YouTube to hold thier Lawo MC36 console. The case is engineered to contour the shape of the console, wrapping the interior foam and doghouse around the angled features and screens. The console is protected by no less than 2" of foam at all points. The case interior features Crosslink foam which is a closed cell material to prevent any scratchers to the console or its screens. The interior also features a 8" deep doghouse that is built out of 3/4" Baltic Birch plywood that is finished with black texture coating.
Chroma Q Color Force 72 Case
This case was built for e33 Productions at MIT University. The case holds 3 ColorForce 72 fixtures in custom CNC cut foam cradles built out of Crosslink foam. The case also features a carpet lined accessory compartment for clamps and cables. The exterior case is built out of 3/8" plywood laminated with black ABS plastic and features 4" Colson casters, stacking caster wells in the lid, recessed lid stay's, and a recessed PAL label dish in the lid.
Utah State Sideline Workbox
This trunk was made for Utah State Athletics for use on their sidelines during games, the trunk is designed to hold tools and parts for repairs between plays. The trunk is designed with fast set up and tear down in mind: the top lid is hinged allowing it to simply flip open, while the front lid is a single panel that magnetically stores on the back of the trunk.
St. Helena Sideline Workbox
This trunk was designed for St. Helena high school for use on their sideline during games. The trunk's top lid features 2 storage compartments and Tilt Lock bins; each Tilt Lock bin has 3 individual compartments for a total of 18 compartments perfect for small parts. The main work surface of the trunk lifts up to reveal 4 compartments for additional storage. Below the main work surface are 2 drawers, the top drawer is divided into 6 compartments, while the bottom drawer is divided into 3 large compartments perfect for back up helmets and other bulky items.
Pelican 1510 Carry On Tech Workbox
This case is designed with the traveling tech in mind, the user configurable dividers can be positioned to hold common items like tape, headphones, tools and adapters. The mesh lid organizer is perfect for small items like pill bottles, batteries, pens and snack bars. The case is large enough to hold every tech’s basic tools and is small enough to fit in the over head storage bins in most commercial airliners. The case is waterproof and features a retractable handle and luggage style wheels.
4 Space Half Width Outboard Rack
This 4-space half-width studio rack shell by LM Cases is a compact desktop rack designed to organize and display rack-mounted audio equipment. Built from ½” Baltic Birch with dovetail corner joints and a clear lacquer finish, it features front and rear 10/32 rack rails with 11” of rackable depth, black hardware, and rubber feet—providing a durable, furniture-grade solution for holding interfaces, mic preamps, and other outboard gear in studios and workstations.
2 Space Studio Outboard Rack
The LM Cases 2RU studio rack is a compact desktop rack designed to organize and display rack-mounted audio gear. Built from ½” Baltic Birch with dovetailed joints and a clear lacquer finish, it features front and rear rack rails with 11” of rackable depth. Rubber feet and black hardware provide stability and a clean, professional look, making it ideal for interfaces, preamps, and other studio equipment.
4 Space Studio Outboard Rack
This 4RU studio rack by LM Cases is a compact desktop rack designed to organize and display rack-mounted audio equipment in a studio, control room, or workstation. Built from ½” Baltic Birch plywood, the rack features precision dovetailed corner joints for strength and durability, with a clear lacquer finish that highlights the natural wood grain.
The rack includes front and rear pre-tapped 10/32 rack rails with 11" of rackable depth, making it well suited for interfaces, mic preamps, headphone amps, and other compact outboard gear. Its open-frame design allows easy access to equipment while maintaining proper airflow.
Finished with black hardware for contrast and rubber feet for desktop stability, the rack offers a furniture-grade solution for neatly displaying and organizing essential studio gear. The drawing indicates an overall width of about 20.25" and a 12" depth, reinforcing its compact desktop footprint.
Power Input / Ethernet 2RU Rack Panel
This panel was built for the University Of Nebraska as a power and signal input for a portable server rack. The panel features a Neutrik Powercon input wired directly to a Hubbell duplex outlet enclosed in a back box. The panel also features a Neutrik NE8FDP-B ethernet jack to provide a WAN input. The panel is built out of .125" thick brushed aluminum that black anodized and features white laser etched labels and the Nebraska "N" logo.
Christie 1.5-2.00 Zoom Lens Case
This case was designed for SmartSource Rentals to hold a Christie 1.5-2.00 zoom lens. The lens is held in a custom CNC cut foam compartment. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and features 1 recessed handles.
Boeing 6 Capacity Monitor Trade Show Shipping Case
This case was designed for Boeing to transport 6 monitors for use on a custom display cart. The case holds 3 Samsung 60" & 75" monitors in an upright configuration. Due to the size of the monitors, the design allows them to slide into compartments so minimal lifting is required to load and unload the case.
Oxygen Event Works 4RU Pull Over Rack
This case was built for Oxygen Event Works for video processing equipment. The case features a removable 4RU inner rack shell and an independent foam lined exterior case.
Oxygen Event Works Audio Adapter Trunk
This case was built for Oxygen Event Works as a way to carry miscellaneous parts and adapters for audio systems. The trunk features 2 removable trays for adapters and removable dividers in the main compartment for segregating cable and other items. The case and trays are made from high quality Baltic Birch and finished in gray texture coating.
Installed Brahler Microphone Workbox
This case was designed to be an installed workstation for Conference Systems. The case holds 40 Brahler TMD/01 gooseneck microphones, D-Doc and D-Mic bases in 9 custom drawers. The case lives in a venue and never sees road use, all drawers are held closed by 2 hinged panels secured with large valance spanning latches.