Products
12 Space Studio Outboard Rack - 18” Deep Shell
Our standard series of studio racks are designed for outboard processors, interfaces, wireless mics, and any rack mount peripheral. The front rails are recessed 1” to allow for any handles or knobs. The rear rail is recessed ½”, with a rail to rail dimension of 16.5”. The 27” max height will still fit under most desks.
12 Space Studio Outboard Rack w/22” Deep Shell
The deep series of studio outboard racks are designed to accommodate larger items like computers, drawers, and amplifiers. This rack shell features 22” between the front & rear rails. The 27” max height will still fit under most desks.
Custom Cut Rack Drawer Foam For Shure P10R+ Bodypack Receivers - 10 Capacity
This custom CNC cut PE foam insert is designed to hold 10 Shure P10R+ bodypack receivers. The insert orientates the receivers on their sides to allow 10 to fit in a 15” deep, 2RU drawer. This insert is designed to work with Middle Atlantic D Series, and Penn Elcom 32 series drawers.
Behringer X-Touch Universal Control Surface Case
This case is designed to hold the Behringer X Touch Universal Control Surface. The controller is held in a custom CNC cut 1” PE foam interior. Hand slots are provided at the left and right side of the controller for easy removal. An accessory compartment is located below the controller to hold the power and signal cables. The case features 1 large grip surface mounted spring loaded handle and 2 HD surface mounted latches.
Ampli Falcon Patriot Shipping Road Case
This is a heavy-duty transport case designed for a Amplivox Falcon Patriot SN3046 or ST3046 lectern. The case interior is lined with a smooth, non-abrasive, Crosslink foam. This foam is designed to protect the lectern and will not damage the lectern’s fabric. White .125” HDPE plastic is laminate to the bottom foam allowing the lectern to slide in, and out easily.
16 RU Pocket Door Amp Rack
This case was built for the production department at the Kennedy Center. The 16-space rack features an OD depth of 24” x 30”.
55” Fully Integrated Installed Confidence Monitor System
This fully integrated confidence monitor system is based around a 55” Sony 4K monitor. The system is delivered turn-key, meaning that it is ready to use upon arrival from LM.
6RU Installed Rack Shell - 12” Deep
This rack shell is designed for use on table tops where a traditional flight case is too bulky, or not aesthetically pleasing. The rack shell can be used for fixed installations, or packed in a larger exterior case. Perfect for video equipment, network switches, test equipment and audio interfaces. The rack is built out of ½” Baltic Birch plywood finished with black texture coating. All edges are routed with any and all voids filled. The rack features 2 black spring loaded recessed handles, pre-tapped 10/32” rail, and four large rubber feet.
Confidence Monitor I/O Enclosure Box w/2 Blank Punches
This is the standard IO box we use for our confidence monitor caddies. The box is designed for customers who are only using a single video input source with their system. The box features a laser etched, text “video” label above the left d-punch. The right punch features a white blank box allowing users to either write a label or use a label machine to notate the connector. The right punch comes standard with an anodized blank plate. D-series connectors are available from LM. Don’t forget to complete your system with a HD LM Tour Systems power cable!
Compact Carry On Resolume Media Server Kit
This portable playback system is designed around our 2 Space Airline Carry On Rack. The system is designed to be the interface portion of a Resolume media server system for a hip-hop artist. The compact format allows the tour’s playback tech to carry the system on any commercial or private airplane.
55” Low Profile Confidence Monitor Case System
This confidence monitor system was designed for low profile operation. The 55” monitor is mounted at a 30-degree angle allowing for a flatter viewing position vs our traditional confidence monitor systems.
Black Magic ATEM 1 Switcher Case
This case is designed to hold a Black Magic ATEM 1 switcher. The switcher is held in a custom CNC cut PE foam insert. The foam insert contours the shape of the switcher for a perfect fit. An accessory compartment is located under the switcher for additional storage. The insert is mounted in a waterproof Pelican 1600 case.
Video FlyPack Case w/Camera Control & Custom LED Light Panels
This case was built for Upstage Video as a portable video flypack work station for camera control. The top lid holds 2 Black Magic 4k monitors. The lid is supported by gas springs that assist in the opening and closing. The springs keep the lid open during use.
1RU NAC3PX-TOP Power Panel w/Courtesy Outlet & 4 Blank D-Punches
This custom 1RU panel is designed to be a central input source for your rack. Power is brought in through a Neutrik NAC3PX-TOP combo inlet. It is then fed to a front mounted courtesy duplex outlet, a True1 outlet, and a rear mounted tail terminated with a Lex receptacle. 4 blank d-punches are included for any additional connectors to cover basic system i/o. Don't forget to pair a LM Tour Systems True1 power cable!
Shure SM7B Waterproof Transport/Storage Case
This case is designed to fit the Shure SM7B microphone and A7WS close talk windscreen. The custom foam insert holds the mic in either a left facing, or right facing direction with the thin windscreen attached. The yoke stand adapter is cushioned by foam positioned in any direction for a secure fit. Storage space in front of the microphone is available for the A7WS windscreen. The durable exterior case is made from injection molded plastic, and features double throw latches, rubber lined carrying handle, pressure release valve, and is sealed with a waterproof gasket.